ASTM B354-19

Standard Terminology Relating to Uninsulated Metallic Electrical Conductors

SCOPE
1.1 This terminology standard defines abbreviations and terms specific to uninsulated electrical conductors. For terms relating to superconductors, see Terminology B713.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Historical
• Publication Date: 31-Jan-2019
• ICS: 01.040.29 - Electrical engineering (Vocabularies)
• ICS: 29.050 - Superconductivity and conducting materials
• Technical Committee: B01 - Electrical Conductors
• Drafting Committee: B01.01 - Editorial and Records

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B354 − 19
Standard Terminology Relating to
1
Uninsulated Metallic Electrical Conductors
This standard is issued under the fixed designation B354; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
These terminologies relate only to interpretations as applied to uninsulated metallic electrical
conductors in specifications under the jurisdiction of ASTM Committee B01 on Electrical Conductors,
and do not necessarily correspond to the definitions used in other fields.
1. Scope B976 Specification for Fiber Reinforced Aluminum Matrix
Composite (AMC) Core Wire for Aluminum Conductors,
1.1 This terminology standard defines abbreviations and
Composite Reinforced (ACCR)
terms specific to uninsulated electrical conductors. For terms
B978/B978M Specification for Concentric-Lay-Stranded
relating to superconductors, see Terminology B713.
Aluminum Conductors, Composite Reinforced (ACCR)
1.2 This international standard was developed in accor-
B987/B987M Specification for Carbon Fiber Thermoset
dance with internationally recognized principles on standard-
Polymer Matrix Composite Core (CFC) for use in Over-
ization established in the Decision on Principles for the
head Electrical Conductors
Development of International Standards, Guides and Recom-
E8/E8M Test Methods for Tension Testing of Metallic Ma-
mendations issued by the World Trade Organization Technical
terials
Barriers to Trade (TBT) Committee.
3. Abbreviations
2. Referenced Documents
AAAC—all aluminum alloy conductor
2
2.1 ASTM Standards:
AAC—aluminum conductor
B193 Test Method for Resistivity of Electrical Conductor
AACSR—aluminum alloy conductor, steel reinforced
Materials
ACAR—aluminum conductor, aluminum alloy reinforced
B230 Specification for Aluminum 1350–H19 Wire for Elec-
ACSR—aluminum conductor, steel reinforced
trical Purposes
ACSS—aluminum conductor steel supported
B398/B398M Specification for Aluminum-Alloy 6201-T81
AMC—aluminum matrix composite
and 6201-T83 Wire for Electrical Purposes
AW—old designation for what is now termed AW2
B609/B609M Specification for Aluminum 1350 Round
AW2—aluminum-clad steel core wire, normal strength
Wire, Annealed and Intermediate Tempers, for Electrical
AW3—aluminum-clad steel core wire, high strength
Purposes
AZ—old designation (aluminized)
B713 Terminology Relating to Superconductors (Withdrawn
CCA—copper-clad aluminum
3
2001)
CCS—copper-clad steel
B941 Specification for Heat Resistant Aluminum-Zirconium
COMP—compact construction
Alloy Wire for Electrical Purposes
EHS—extra high strength
GA—old designation for what is now termed GA2
GA2—zinc coated (galvanized) steel wire, coating class A
1
This terminology is under the jurisdiction of ASTM Committee B01 on
GA3—zinc coated (galvanized) high strength steel wire,
Electrical Conductors and is the direct responsibility of Subcommittee B01.01 on
Editorial and Records. coating class A
Current edition approved Feb. 1, 2019. Published February 2019. Originally
GA4—zinc coated (galvanized) extra high strength steel
approved in 1960. Last previous edition approved in 2016 as B354 – 16. DOI:
wire, coating class A
10.1520/B0354-19.
2
GA5—zinc coated (galvanized) ultra high strength steel
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
wire, coating class A
Standards volume information, refer to the standard’s Document Summary page on
GB—obsolete designation, class B galvanizing is no longer
the ASTM website.
3 offered
The last approved version of this historical standard is referenced on
www.astm.org. GC—old designation for what is now termed GC2
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B354 − 19
GC2—zinc coated (galvanized) steel wire, coating class C /A0—used as a suffix modifier for ACAMCS and ACCFCS
HS—high strength type of conductors representing 1350 O Temper aluminum
IACS—international annealed copper standard, which is material in accordance with Specification B609/B609M.
2
1/58 Ohm-mm /m at 20°C for 100 % conductivity
/A1—used as a suffix modifier for ACAMCR and ACCFCR
LSE—low stress elongation
type of conductors representing 1350 H19 aluminum material
MA—old designation for what is now termed MA2
in accordance with Specification B230.
MA2—zinc-5 % aluminum-mischmetal alloy coated steel
/A3—used as a suffix modifier for ACAMCR and ACCFCR
wire, coating class A
type of conductors representing 6201 T81 aluminum a
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B354 − 16 B354 − 19
Standard Terminology Relating to
1
Uninsulated Metallic Electrical Conductors
This standard is issued under the fixed designation B354; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
These terminologies relate only to interpretations as applied to uninsulated metallic electrical
conductors in specifications under the jurisdiction of ASTM Committee B01 on Electrical Conductors,
and do not necessarily correspond to the definitions used in other fields.
1. Scope
1.1 This terminology standard defines abbreviations and terms specific to uninsulated electrical conductors. For terms relating
to superconductors, see Terminology B713.
1.2 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
B193 Test Method for Resistivity of Electrical Conductor Materials
B230 Specification for Aluminum 1350–H19 Wire for Electrical Purposes
B398/B398M Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
B609/B609M Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
3
B713 Terminology Relating to Superconductors (Withdrawn 2001)
B941 Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
B976 Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite
Reinforced (ACCR)
B978/B978M Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)
B987/B987M Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical
Conductors
E8/E8M Test Methods for Tension Testing of Metallic Materials
3. Abbreviations
AAAC—all aluminum alloy conductor
AAC—aluminum conductor
AACSR—aluminum alloy conductor, steel reinforced
ACAR—aluminum conductor, aluminum alloy reinforced
ACSR—aluminum conductor, steel reinforced
ACSS—aluminum conductor steel supported
AMC—aluminum matrix composite
AW—old designation for what is now termed AW2
1
This terminology is under the jurisdiction of ASTM Committee B01 on Electrical Conductors and is the direct responsibility of Subcommittee B01.01 on Editorial and
Records.
Current edition approved Sept. 1, 2016Feb. 1, 2019. Published September 2016February 2019. Originally approved in 1960. Last previous edition approved in 20122016
as B354 – 12.B354 – 16. DOI: 10.1520/B0354-16.10.1520/B0354-19.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
The last approved version of this historical standard is referenced on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
B354 − 19
AW2—aluminum-clad steel core wire, normal strength
AW3—aluminum-clad steel core wire, high strength
AZ—old designation (aluminized)
CCA—copper-clad aluminum
CCS—copper-clad steel
COMP—compact construction
EHS—extra high strength
GA—old designation for what is now termed GA2
GA2—zinc coated (galvanized) steel wire, coating class A
GA3—zinc coated (galvanized) high strength steel wire, coating class A
GA4—zinc coated (galvanized) extra high strength steel wire, coating class A
GA5—zinc coated (galvanized) ultra high strength steel wire, coating class A
GB—obsolete designation, class B galvanizing is no longer offered
GC—old designation for what is now termed GC2
GC2—zinc coated (galvanized) steel wire, coating class C
HS—high strength
2
IACS—international annealed copper standard, which is 1/58 Ohm-mm /m at 20°C for 100 % conductivity
LSE—low stress elongation
MA—old designation for what is now termed MA2
MA2—zinc-5 % aluminum-mischmetal alloy coated steel wire, coating class A
MA3—zinc-5 % aluminum-mischmetal alloy coated high strength steel wire, coating class A
MA4—
...