ASTM F1777-11
(Practice)Standard Practice for Paintball Field Operation
Standard Practice for Paintball Field Operation
ABSTRACT
This practice sets forth procedures for operating a paintball playing field. The goal is to assist paintball field operators in running a safe business. Like any other physical activity, paintball presents a potential for injury. No procedural practice can prevent all injuries, especially when paintball players do not follow safety instructions. The ultimate responsibility for preventing injury lies with the paintball player. This practice, however, intends to promote safe paintball field operation through standardization of operating practice.
SCOPE
1.1 This practice establishes minimum safety requirements for the operation of paintball playing fields, and provides for certain materials and procedures required.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation:F1777–11
Standard Practice for
1
Paintball Field Operation
This standard is issued under the fixed designation F1777; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This practice sets forth procedures for operating a paintball playing field. The goal is to assist
paintball field operators in running a safe business. Like any other physical activity, paintball presents
apotentialforinjury.Noproceduralpracticecanpreventallinjuries,especiallywhenpaintballplayers
do not follow safety instructions. The ultimate responsibility for preventing injury lies with the
paintball player. This practice, however, intends to promote safe paintball field operation through
standardization of operating practice.
1. Scope F2773 Practice for Transfilling CompressedAir or Nitrogen
and Safe Handling of Small Paintball Cylinders
1.1 This practice establishes minimum safety requirements
for the operation of paintball playing fields, and provides for
3. Terminology
certain materials and procedures required.
3.1 Definitions of Terms Specific to This Standard:
2. Referenced Documents 3.1.1 bulk cylinder, n—a gas storage vessel used to fill gas
2
propellant vessels on paintball markers.
2.1 ASTM Standards:
3.1.2 discharge mode, n—a mode that controls the number
F1750 Specification for Paintball Marker Threaded-
of paintballs discharged per trigger cycle.
Propellant Source Interface
3.1.3 ear protection, n—devices that cover the ear cavities
F1776 Specification for Eye Protective Devices for Paint-
and prevent direct entry of paintballs into the ear canals.
ball Sports
3.1.4 filling apparatus, n—equipment used to properly fill
F1979 Specification for Paintballs Used in the Sport of
gas propellant vessels on paintball markers from bulk cylin-
Paintball
ders.
F2030 Specification for Paintball Cylinder Burst Disk As-
3.1.5 game area, n—an area in which paintball games are
semblies
conducted and in which paintball goggles are required to be
F2184 Guide for Installation of Paintball Barrier Netting
worn.
F2271 Specification for Paintball Marker Barrel Blocking
3.1.6 goggles, n—consist of eye protection devices that
Devices
comply with Specification F1776 and have ear and face
F2272 Specification for Paintball Markers
protection integrated into the design.
F2278 Test Method for Evaluating Paintball Barrier Netting
3.1.7 goggles on area, n—areas in which all persons are
F2553 Specification for Warnings on Refillable CO Cylin-
2
required to wear paintball goggles, such as and not limited to
ders Used In the Sport of Paintball
playing fields, game areas, chronograph areas, and target
F2653 Specification for Paintball Valve Male Threaded
ranges.
Connection for Use with Approved Cylinders
3.1.8 paintball, n—the ammunition used to fire from a
paintball marker that complies with Specification F1979.
1
This practice is under the jurisdiction of ASTM Committee F08 on Sports 3.1.9 paintball air system, n—the power source normally
Equipment and Facilities and is the direct responsibility of Subcommittee F08.24 on
used by a paintball marker to propel a paintball.
Paintball and Equipment.
3.1.9.1 Discussion—All paintball air systems must meet
Current edition approved March 1, 2011. Published March 2011. Originally
various government regulations that vary by location and shall
approved in 1997. Last previous edition approved in 2002 as F1777 – 02. DOI:
10.1520/F1777-11.
comply as required with Specifications F1750, F2030, F2553,
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
and F2653.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3.1.10 paintball marker, n—a device specifically designed
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. to discharge paintballs that comply with Specification F2272.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
F1777–11
3.1.11 paintball marker barrel blocking device, n—a device 4.7 Emergency Requirements:
specifically designed to be installed on a paintball marker to 4.7.1 Emergency Contingency Plan—Emergency proce-
prevent the accidental discharge of paintballs that comply with
dures,printedin12-pointorlargertypeshallbeonhandandall
Specification F2271. staff members will be aware of the required actions to
3.1.12 player, n—a paintball game participant
implement this plan.
3.1.13 playing field, n—an area delineated by a boundary
4.7.2 First Aid Kit—A properly s
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F1777–02 Designation: F1777 – 11
Standard Practice for
1
Paintball Field Operation
This standard is issued under the fixed designation F1777; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This practice sets forth procedures for operating a paintball playing field. The goal is to assist
paintball field operators in running a safe business. Like any other physical activity, paintball presents
apotentialforinjury.Noproceduralpracticecanpreventallinjuries,especiallywhenpaintballplayers
do not follow safety instructions. The ultimate responsibility for preventing injury lies with the
paintball player. This practice, however, intends to promote safe paintball field operation through
standardization of operating practice.
1. Scope
1.1 This practice establishes minimum safety requirements for the operation of paintball playing fields, and provides for certain
materials and procedures required.
2. Referenced Documents
2
2.1 ASTM Standards: ASTM Standards:
F1750 Specification for Paintball Marker Threaded-Propellant Source Interface
F1776 Specification for Eye Protective Devices for Paintball Sports Specification for Eye Protective Devices for Paintball
Sports
F1979 Specification for Paintballs Used in the Sport of Paintball
F2030 Specification for Paintball Cylinder Burst Disk Assemblies
F2184 Guide for Installation of Paintball Barrier Netting
F2271 Specification for Paintball Marker Barrel Blocking Devices
F2272 Specification for Paintball Markers
F2278 Test Method for Evaluating Paintball Barrier Netting
F2553 Specification for Warnings on Refillable CO Cylinders Used In the Sport of Paintball
2
F2653 Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
F2773 Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
3. Terminology
3.1 Definitions of Terms Specific to This Standard:
3.1.1 bulk cylinder, n—a gas storage vessel used to fill gas propellant vessels on paintball markers.
3.1.2 burst-mode marker, n—a burst mode marker may discharge two or more times per trigger cycle or may discharge two or
more times with the pull and release of the trigger.
3.1.3discharge mode, n—a mode that controls the number of paintballs discharged per trigger cycle.
3.1.4
3.1.3 ear protection, n—devices that cover the ear cavities and prevent direct entry of paintballs into the ear canals.
3.1.5enhanced trigger marker, n—a paintball marker that at some point discharges more than one paintball per trigger cycle.
This includes markers that “store” the number of trigger pulls and discharge more than one paintball at some point.
1
This practice is under the jurisdiction ofASTM Committee F08 on Sports Equipment and Facilities and is the direct responsibility of Subcommittee F08.24 on Paintball
Sports.
Current edition approved June 10, 2002. Published July 2002. Originally published as F1777–97. Last previous edition F1777–97. DOI: 10.1520/F1777-02.on Paintball
and Equipment.
Current edition approved March 1, 2011. Published March 2011. Originally approved in 1997. Last previous edition approved in 2002 as F1777 – 02. DOI:
10.1520/F1777-11.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
F1777 – 11
3.1.6
3.1.4 filling apparatus, n—equipment used to properly fill gas propellant vessels on paintball markers from bulk cylinders.
3.1.7fully automatic paintball marker, n—a marker that discharges when the triggering device is actuated and continues to
discharge until the trigger returns to its reset or recycle position.
3.1.8
3.1.5 game area, n—an area in which paintball games are conducted and in which paintball goggles are required to be worn.
3.1.9
3.1.6 goggles, n—consist of eye protection devices that comply with Specification F1776 and have ear and face protection
integrated into the design.
3.1.10
3.1.7 goggles on area, n—areas in which all persons are required to wear pain
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.