EN 16603-70-31:2015

Space engineering - Ground systems and operations - Monitoring and control data definition

This Standard defines the monitoring and control data that a supplier delivers together with a product in order to allow a customer to
perform space system integration, testing and mission operations.
The requirements in this Standard are defined in terms of what data is provided by the supplier to the customer. How this data is provided (e.g. using spreadsheet data or XML) is outside of scope.
The Standard assumes that missions conform to the following ECSS standards:
•   ECSS-E-ST-50 and ECSS-E-ST-70;
•   ECSS E ST-70 41;
•   ECSS E ST-70 32.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.

Raumfahrttechnik - Bodensysteme und Bodenbetrieb - Überwachung und Definitionen zu Steuerdaten

Ingénierie spatiale - Systèmes sol et opérations - Définition des données de commande et contrôle

Vesoljska tehnika - Zemeljski sistemi in delovanje - Nadzorovanje in krmiljenje nadzornih podatkov

Ta standard določa nadzorovanje in nadzorne podatke, ki jih dobavitelj predloži skupaj s proizvodom, da odjemalcu omogoči izvajanje integracije vesoljskega sistema, preskušanja in delovanja misije. Zahteve iz tega standarda so določene v smislu, katere podatke dobavitelj predloži odjemalcu. Način zagotavljanja teh podatkov (npr. z uporabo podatkov v preglednicah ali v obliki XML) je zunaj področja uporabe.  Ta standard predpostavlja, da so misije skladne z naslednjimi standardi ECSS: •ECSS-E-ST-50 in ECSS-E-ST-70; •ECSS E ST-70 41; •ECSS E ST-70 32. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.

General Information

• Status: Published
• Publication Date: 27-Jan-2015
• Withdrawal Date: 30-Jul-2015
• ICS: 49.140 - Space systems and operations
• Technical Committee: CEN/CLC/TC 5 - Space
• Drafting Committee: CEN/CLC/TC 5 - Space
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 13-Jan-2021
• Completion Date: 14-Apr-2025
• Mandate: M/496 - Mandate addressed to CEN, CENELEC and ETSI to develop standardisation regarding space industry (Phase 3 of the process)
• Ref Project: SIST EN 16603-70-31:2015 - Space engineering - Ground systems and operations - Monitoring and control data definition

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2015
Vesoljska tehnika - Zemeljski sistemi in delovanje - Nadzorovanje in krmiljenje
nadzornih podatkov
Space engineering - Ground systems and operations - Monitoring and control data
definition
Raumfahrttechnik - Bodensysteme und Bodenbetrieb - Überwachung und Definitionen zu
Steuerdaten
Ingénierie spatiale - Systèmes sol et opérations - Définition des données de commande
et contrôle
Ta slovenski standard je istoveten z: EN 16603-70-31:2015
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 16603-70-31
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2015
ICS 49.140
English version
Space engineering - Ground systems and operations -
Monitoring and control data definition
Ingénierie spatiale - Systèmes sol et opérations - Définition Raumfahrttechnik - Bodensysteme und Bodenbetrieb -
des données de commande et contrôle Überwachung und Definitionen zu Steuerdaten
This European Standard was approved by CEN on 23 November 2014.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN and CENELEC
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC Management Centre
has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2015 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN 16603-70-31:2015 E
worldwide for CEN national Members and for CENELEC
Members.
Table of contents
Foreword . 8
Introduction . 8
1 Scope . 10
2 Normative references . 11
3 Terms, definitions and abbreviated terms . 12
3.1 Terms from other standards . 12
3.2 Terms specific to the present standard . 12
3.3 Abbreviated terms. 13
4 Background and context . 15
4.1 The space system model . 15
4.2 Monitoring and control view of the SSM . 16
4.2.1 Introduction . 16
4.2.2 Standard SSM definitions . 16
4.2.3 Product-specific SSM tailoring . 18
5 Conventions . 20
5.1 Data definition . 20
5.2 Railroad diagrams. 21
5.3 Case sensitivity . 22
5.4 Names . 22
5.5 Data types . 24
5.5.1 General . 24
5.5.2 Simple Data Types . 25
5.5.3 Complex Data Types . 37
6 Monitoring and control data requirements . 38
6.1 Data exchange . 38
6.2 Specification of complex data types . 39
6.2.1 General . 39
6.2.2 Activity call . 39
6.2.3 Expression . 40
6.2.4 Interpretation function . 40
6.2.5 Procedure . 41
6.2.6 Synthetic parameter . 41
6.2.7 Value set . 42
6.3 Product data . 42
6.3.1 Introduction . 42
6.3.2 Product configuration data . 43
6.4 Data population . 47
6.5 System element data . 49
6.5.1 Introduction . 49
6.5.2 System element generic data . 50
6.5.3 System data . 51
6.5.4 Application process data . 53
6.5.5 Service data . 55
6.5.6 MAP data . 93
6.5.7 VC data . 93
6.5.8 Functions . 94
6.5.9 Memory data . 95
6.5.10 Memory sub-block data . 95
6.5.11 Store data . 96
6.5.12 CPDU data . 97
6.5.13 On/Off device data . 97
6.5.14 Register load device data . 98
6.5.15 Sensor data. 98
6.6 Reporting data . 99
6.6.1 Introduction . 99
6.6.2 General . 99
6.6.3 Parameters . 101
6.6.4 Compound parameters . 104
6.6.5 Synthetic reporting data . 106
6.6.6 Checking data . 106
6.7 Activities . 111
6.7.1 General . 111
6.7.2 Activity argument value set . 114
6.7.3 Activity execution data . 114
6.7.4 Telecommands . 118
6.7.5 Procedures . 123
6.8 Events . 125
Annex A (informative) PUS service tailoring . 126
A.1 Introduction . 126
A.2 Telecommand verification service . 127
A.2.1 The PUS service model . 127
A.2.2 Service tailoring data . 128
A.2.3 Service requests and reports . 129
A.3 Device command distribution service . 131
A.3.1 The PUS service model . 131
A.3.2 Service tailoring data . 133
A.3.3 Service requests and reports . 134
A.4 Housekeeping and diagnostic data reporting service . 134
A.4.1 The PUS service model . 134
A.4.2 Service tailoring data . 136
A.4.3 Service requests and reports . 142
A.5 Parameter statistics reporting service . 148
A.5.1 The PUS service model . 148
A.5.2 Service tailoring data . 148
A.5.3 Service requests and reports . 150
A.6 Event reporting service . 151
A.6.1 The PUS service model . 151
A.6.2 Service tailoring data . 152
A.6.3 Service requests and reports . 152
A.7 Memory management service . 153
A.7.1 The PUS service model . 153
A.7.2 Service tailoring data . 154
A.7.3 Service requests and reports . 156
A.8 Function management service . 158
A.8.1 The PUS service model . 158
A.8.2 Service tailoring data . 158
A.8.3 Service requests and reports . 159
A.9 Time management service . 159
A.9.1 The PUS service model . 159
A.9.2 Service tailoring data . 160
A.9.3 Service requests and reports . 160
A.10 On-board operations scheduling service . 161
--------
...