EN 16436-1:2014+A2:2018/prA3
(Amendment)Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
- pressurized gas container to a regulating device,
- pressurized gas container to an appliance,
- regulating device to an appliance, and
- regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
- welding purposes (see EN ISO 3821, EN 1327);
- propulsion purposes;
- LPG transfer purposes (see EN 1762).
Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1: Schläuche mit und ohne Einlage
No Scope available.
Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
No scope available.
Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A2) - Dopolnilo A3
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2019
Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v
plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A2) - Dopolnilo
A3
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and
their mixtures in the vapour phase - Part 1: Hoses and tubings
Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur
Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1:
Schläuche mit und ohne Einlage
Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane,
le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
Ta slovenski standard je istoveten z: EN 16436-1:2014+A2:2018/prA3
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 16436- en,fr,de
1:2014+A2:2019/oprA3:2019
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 16436-
NORME EUROPÉENNE
1:2014+A2:2018
EUROPÄISCHE NORM
prA3
October 2019
ICS 23.040.70
English Version
Rubber and plastics hoses, tubing and assemblies for use
with propane and butane and their mixtures in the vapour
phase - Part 1: Hoses and tubings
Tuyaux, tubes et flexibles en caoutchouc et en plastique Gummi- und Kunststoff-Schläuche und -
pour utilisation avec le propane, le butane et leurs Schlauchleitungen mit und ohne Einlage zur
mélanges en phase vapeur - Partie 1: Tuyaux et tubes Verwendung mit Propan, Butan und deren Gemischen
in der Gasphase - Teil 1: Schläuche mit und ohne
Einlage
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 181.
This draft amendment A3, if approved, will modify the European Standard EN 16436-1:2014+A2:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.