EN 16436-1:2014+A3:2020

Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
- pressurized gas container to a regulating device,
- pressurized gas container to an appliance,
- regulating device to an appliance, and
- regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
- welding purposes (see EN ISO 3821, EN 1327);
- propulsion purposes;
- LPG transfer purposes (see EN 1762).

Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1: Schläuche mit und ohne Einlage

Diese Europäische Norm legt die Merkmale von und Leistungsanforderungen an Gummi- oder Kunststoff-schläuche, mit und ohne Einlage, zum Einsatz mit handelsüblichem Propan und handelsüblichem Butan und deren Gemischen in der Gasphase fest, für die Verbindung von Geräten zwischen
   einem mit Druck beaufschlagten Gasbehälter und einem Druckregelgerät,
   einem mit Druck beaufschlagten Gasbehälter und einem Gerät,
   einem Druckregelgerät und einem Gerät und
   einem Druckregelgerät und einer Leitungsanlage
in einem Umgebungstemperaturbereich von −30 °C bis +70 °C. Die Betriebsdrücke liegen zwischen 0 bar und 30 bar.
In Tabelle 1 werden drei Klassen in Abhängigkeit vom höchsten Betriebsdruck und der niedrigsten Umgebungstemperatur festgelegt.
Diese Europäische Norm behandelt nur den Schlauchteil, mit oder ohne Einlage, von Schlauchleitungen. Die Schlauchleitungen werden in EN 16436 2 geregelt.
Diese Europäische Norm gilt nicht für Schläuche für:
   Schweißanwendungen (siehe EN ISO 3821, EN 1327);
   Antriebszwecke;
   Flüssiggasfüll-und umfüllverfahren (siehe EN 1762).

Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes

No scope available.

Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A3)

General Information

• Status: Published
• Publication Date: 19-May-2020
• Withdrawal Date: 29-Nov-2020
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 181 - Dedicated liquified petroleum gas appliances
• Drafting Committee: CEN/TC 181/WG 3 - Small non-domestic space heaters
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 12-Oct-2022
• Ref Project: SIST EN 16436-1:2014+A3:2020 - Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings

Relations

• Merged From: EN 16436-1:2014+A2:2018 - Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
• Effective Date: 19-Jan-2023
• Merged From: EN 16436-1:2014+A2:2018/prA3 - Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16436-1:2014+A3:2020
01-julij-2020
Nadomešča:
SIST EN 16436-1:2014+A2:2019
Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v
plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A3)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and
their mixtures in the vapour phase - Part 1: Hoses and tubings
Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur
Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1:
Schläuche mit und ohne Einlage
Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane,
le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
Ta slovenski standard je istoveten z: EN 16436-1:2014+A3:2020
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 16436-1:2014+A3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16436-1:2014+A3:2020

---------------------- Page: 2 ----------------------
SIST EN 16436-1:2014+A3:2020


EN 16436-1:2014+A3
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 23.040.70
English Version

Rubber and plastics hoses, tubing and assemblies for use
with propane and butane and their mixtures in the vapour
phase - Part 1: Hoses and tubings
Tuyaux, tubes et flexibles en caoutchouc et en plastique Gummi- und Kunststoff-Schläuche und -
pour utilisation avec le propane, le butane et leurs Schlauchleitungen mit und ohne Einlage zur
mélanges en phase vapeur - Partie 1: Tuyaux et tubes Verwendung mit Propan, Butan und deren Gemischen
in der Gasphase - Teil 1: Schläuche mit und ohne
Einlage
This European Standard was approved by CEN on 13 May 2018 and includes Amendment 3 approved by CEN on 12 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16436-1:2014+A3:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16436-1:2014+A3:2020
EN 16436-1:2014+A3:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Classification of tubing and hose . 5
5 Materials and construction of tubing and hoses . 6
6 Dimensions of tubing and hoses . 7
6.1 Inside diameters, wall thicknesses and concentricity . 7
6.2 Measurement of ovality . 7
7 Properties of materials for tubing, lining and cover of hoses . 7
7.
...

SLOVENSKI STANDARD
SIST EN 16436-1:2014+A3:2020
01-julij-2020
Nadomešča:
SIST EN 16436-1:2014+A2:2019
Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v
plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A3)
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and
their mixtures in the vapour phase - Part 1: Hoses and tubings
Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur
Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1:
Schläuche mit und ohne Einlage
Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane,
le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
Ta slovenski standard je istoveten z: EN 16436-1:2014+A3:2020
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 16436-1:2014+A3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16436-1:2014+A3:2020

---------------------- Page: 2 ----------------------
SIST EN 16436-1:2014+A3:2020


EN 16436-1:2014+A3
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN 16436-1:2014+A2:2018
English Version

Rubber and plastics hoses, tubing and assemblies for use
with propane and butane and their mixtures in the vapour
phase - Part 1: Hoses and tubings
Tuyaux, tubes et flexibles en caoutchouc et en plastique Gummi- und Kunststoff-Schläuche und -
pour utilisation avec le propane, le butane et leurs Schlauchleitungen mit und ohne Einlage zur
mélanges en phase vapeur - Partie 1: Tuyaux et tubes Verwendung mit Propan, Butan und deren Gemischen
in der Gasphase - Teil 1: Schläuche mit und ohne
Einlage
This European Standard was approved by CEN on 12 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16436-1:2014+A3:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16436-1:2014+A3:2020
EN 16436-1:2014+A3:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Classification of tubing and hose . 5
5 Materials and construction of tubing and hoses . 6
6 Dimensions of tubing and hoses . 7
6.1 Inside diameters, wall thicknesses and concentricity . 7
6.2 Measurement of ovality . 8
7 Properties of materials for tubing, lining and cover of hoses . 8
7.1 Ten
...