SIST EN 16436-1:2014+A2:2019/oprA3:2019

Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings

This European Standard specifies the characteristics and performance requirements for tubing and hoses made of either rubber or plastics for use with commercial propane and commercial butane and mixtures thereof, in the vapour phase, for connection of appliances, from:
- pressurized gas container to a regulating device,
- pressurized gas container to an appliance,
- regulating device to an appliance, and
- regulating device to installation pipework,
in environments of a temperature range from -30 °C to +70 °C. Working pressures are from 0 bar to 30 bar.
Three classes are defined in Table 1 according to the maximum working pressures and minimum ambient temperatures.
This European Standard only covers the tubing or hose part of assemblies. The assemblies themselves will be covered by EN 16436-2.
This European Standard does not apply to hoses for:
- welding purposes (see EN ISO 3821, EN 1327);
- propulsion purposes;
- LPG transfer purposes (see EN 1762).

Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1: Schläuche mit und ohne Einlage

No Scope available.

Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane, le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes

No scope available.

Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A2) - Dopolnilo A3

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Jan-2020
• ICS: 83.140.40 - Hoses
• Technical Committee: PLN - Gas appliances for domestic use
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 30-Dec-2020
• Due Date: 04-Jan-2021
• Completion Date: 30-Dec-2020
• Ref Project: EN 16436-1:2014+A2:2018/prA3 - Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings

Relations

• Consolidated By: SIST EN 16436-1:2014+A3:2020 - Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
• Effective Date: 01-Jul-2020
• Revised: SIST EN 16436-1:2014+A2:2019 - Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
• Effective Date: 01-Dec-2019

Overview

EN 16436-1:2014+A2:2018/prA3 is a European standard from CEN that specifies the characteristics and performance requirements for rubber and plastics hoses and tubing used with commercial propane, butane and their mixtures in the vapour phase. It covers tubing and hoses used to connect pressurized gas containers, pressure regulators, appliances and installation pipework in ambient temperatures from ‑30 °C to +70 °C and working pressures from 0 bar up to 30 bar. This part applies only to the hose/tubing component; complete assemblies are addressed in EN 16436-2.

Key topics and technical requirements

• Scope and application: Hoses/tubing for vapour-phase LPG connections (container ↔ regulator, container ↔ appliance, regulator ↔ appliance, regulator ↔ pipework).
• Temperature & pressure range: Rated for service between ‑30 °C and +70 °C and 0–30 bar working pressure.
• Hose classes: Three classes are defined (see Table 1) according to maximum working pressure and minimum ambient temperature. Example markings in the draft amendment show: class 1 (e.g., 0.2 bar), class 2 (e.g., 10 bar), class 3 (e.g., 30 bar).
• Dimensional tolerances (draft amendment A3): added values include an inside diameter 14.0 mm with tolerance ±1.0 mm, maximum concentricity variation 0.6 mm, wall thickness 5.0 mm for classes 1 & 2 and 6.0 mm for class 3, and wall thickness tolerance ±0.5 mm.
• Marking requirements: Amendments update marking details (e.g., diameter marking change to 6.3 mm) and include specific notes on expiry (EXP DATE) and production date (PROD DATE) conventions for tubing and hoses.
• Exclusions: Not applicable to hoses for welding (see EN ISO 3821, EN 1327), propulsion, or LPG transfer (see EN 1762).

Applications and who uses this standard

• Manufacturers of LPG rubber and plastic hoses and tubing - for material selection, design limits, production tolerances and marking.
• Testing and certification bodies - to verify compliance with dimensional, pressure and marking requirements.
• Installers and appliance manufacturers - to select components compatible with LPG vapour connections and service conditions.
• Procurement, safety officers and regulators - to specify compliant hoses in supply chains and installations.

Related standards

• EN 16436-2 (assemblies)
• EN ISO 3821, EN 1327 (welding hoses)
• EN 1762 (LPG transfer hoses)

This standard ensures safe, interoperable LPG vapour connections by defining performance, dimensional tolerances and marking practices-critical for product safety, regulatory compliance and system reliability.

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Gumeni in plastični priključki, cevovodi in cevi za propan, butan in njune zmesi v
plinastem stanju - 1. del: Cevi in cevovodi (vključno z dopolnili do A2) - Dopolnilo
A3
Rubber and plastics hoses, tubing and assemblies for use with propane and butane and
their mixtures in the vapour phase - Part 1: Hoses and tubings
Gummi- und Kunststoff-Schläuche und -Schlauchleitungen mit und ohne Einlage zur
Verwendung mit Propan, Butan und deren Gemischen in der Gasphase - Teil 1:
Schläuche mit und ohne Einlage
Tuyaux, tubes et flexibles en caoutchouc et en plastique pour utilisation avec le propane,
le butane et leurs mélanges en phase vapeur - Partie 1: Tuyaux et tubes
Ta slovenski standard je istoveten z: EN 16436-1:2014+A2:2018/prA3
ICS:
83.140.40 Gumene cevi Hoses
SIST EN 16436- en,fr,de
1:2014+A2:2019/oprA3:2019
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 16436-
NORME EUROPÉENNE
1:2014+A2:2018
EUROPÄISCHE NORM
prA3
October 2019
ICS 23.040.70
English Version
Rubber and plastics hoses, tubing and assemblies for use
with propane and butane and their mixtures in the vapour
phase - Part 1: Hoses and tubings
Tuyaux, tubes et flexibles en caoutchouc et en plastique Gummi- und Kunststoff-Schläuche und -
pour utilisation avec le propane, le butane et leurs Schlauchleitungen mit und ohne Einlage zur
mélanges en phase vapeur - Partie 1: Tuyaux et tubes Verwendung mit Propan, Butan und deren Gemischen
in der Gasphase - Teil 1: Schläuche mit und ohne
Einlage
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 181.

This draft amendment A3, if approved, will modify the European Standard EN 16436-1:2014+A2:2018. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent
...