EN 12400:2002
(Main)Windows and pedestrian doors - Mechanical durability - Requirements and classification
Windows and pedestrian doors - Mechanical durability - Requirements and classification
This standard provides a means of classifying windows and doors according to their performance when subjected to repeated opening and closing. The performance levels take into account normal and intended use.
Fenster und Türen - Mechanische Beanspruchung - Anforderungen und Einteilung
Diese Europäische Norm legt das Verfahren zur Klassifizierung zu öffnender Fenster und Türen hinsichtlich der Dauerfunktionstüchtigkeit fest. Die Klassen berücksichtigen den normalen und den vorgesehenen Gebrauch.
Fenêtres et portes - Durabilité mécanique - Prescriptions et classification
La présente norme établit un système de classification des fenêtres et des portes en fonction de leurs performances lorsqu'elles sont soumises à des ouvertures et fermetures répétées. Les niveaux de performance correspondent à l'utilisation prévue et normale.
Okna in zunanja vhodna vrata – Mehanska trajnost – Zahteve in razvrščanje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2003
2NQDLQ]XQDQMDYKRGQDYUDWD±0HKDQVNDWUDMQRVW±=DKWHYHLQUD]YUãþDQMH
Windows and pedestrian doors - Mechanical durability - Requirements and classification
Fenster und Türen - Mechanische Beanspruchung - Anforderungen und Einteilung
Fenetres et portes - Durabilité mécanique - Prescriptions et classification
Ta slovenski standard je istoveten z: EN 12400:2002
ICS:
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12400
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2002
ICS 91.060.50
English version
Windows and pedestrian doors - Mechanical durability -
Requirements and classification
Fenêtres et portes - Durabilité mécanique - Prescriptions et Fenster und Türen - Mechanische Beanspruchung -
classification Anforderungen und Einteilung
This European Standard was approved by CEN on 5 September 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12400:2002 E
worldwide for CEN national Members.
Contents
page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Classification criteria.5
Annex A (informative) Performance classes in relation to categories of duty .6
Tables
Table 1 — Classification. 5
Table A.1 — Window classes. 6
Table A.2 — Door classes . 6
Foreword
This document (EN 12400:2002) has been prepared by Technical Committee CEN/TC 33 "Doors, windows,
shutters, building hardware and curtain walling", the secretariat of which is held by AFNOR.
This European
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.