Equipment for crop protection - Knapsack sprayers - Part 3: Inspection of knapsack sprayers in use (ISO/DIS 19932-3:2022)

This document specifies the requirements and test methods for inspection of the use of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products (PPPs). The requirements relate mainly to the condition of the sprayer with respect to its potential risk to the operator and the environment and its performance to achieve good application. It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liquid, intended for use primarily in agriculture, forestry and horticulture, with a nominal volume of more than 6,0 l. This document does not apply to — knapsack combustion engine-driven air-blast sprayers, which are covered in ISO 28139 — controlled droplet application equipment utilizing rotary atomisers, or — portable application equipment for spatial application (such as foggers).

Pflanzenschutzgeräte - Tragbare Geräte - Teil 3: Kontrolle von in Gebrauch befindlichen Geräten (ISO/DIS 19932-3:2022)

Dieses Dokument legt die Anforderungen und Prüfverfahren für die Überprüfung der Verwendung tragbarer Spritzgeräte für die Ausbringung von Pflanzenschutzmitteln, die auf dem Rücken oder der Schulter des Bedieners getragen werden, fest.
Die Anforderungen betreffen hauptsächlich den Zustand des Spritzgeräts in Bezug auf ein mögliches Risiko für den Bediener und die Umwelt sowie seine Leistung für eine gute Ausbringung.
Es gilt für tragbare Spritzgeräte, die mit einem Hebel betätigt werden (Handhebel-Spritzgeräte), Druckspeicher-Spritzgeräte sowie Spritzgeräte, die von einem Verbrennungs- oder einem Elektromotor angetrieben werden (Motor-Spritzgeräte), und hydraulischen Druck für die Zerstäubung der Spritz¬flüssigkeit verwenden; er gilt für Geräte mit einem Nennvolumen von mehr als 6,0 l, die insbesondere für eine Verwendung in der Land- und Forstwirtschaft und im Gartenbau vorgesehen sind.
Dieses Dokument gilt nicht für
—   rückentragbare Blasluftsprühgeräte mit Verbrennungsmotor, die durch ISO 28139:2019/Amd 1:20XX abgedeckt sind,
—   Geräte für die kontrollierte Tröpfchenausbringung mit drehenden Zerstäubern oder
—   tragbare Geräte für großflächige Anwendungen (z. B. Vernebler).

Matériel de protection des cultures - Pulvérisateurs à dos - Partie 3: Contrôle des pulvérisateurs portables à dos en service (ISO/DIS 19932-3:2022)

Oprema za zaščito poljščin - Nahrbtni škropilniki - 3. del: Preverjanje delovanja nahrbtnih škropilnikov (ISO/DIS 19932-3:2022)

General Information

Status
Not Published
Publication Date
14-Jan-2024
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
12-Sep-2022
Due Date
26-Apr-2023
Completion Date
12-Sep-2022

Buy Standard

Draft
prEN ISO 19932-3:2022
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 19932-3:2022
01-september-2022
Oprema za zaščito poljščin - Nahrbtni škropilniki - 3. del: Preverjanje delovanja
nahrbtnih škropilnikov (ISO/DIS 19932-3:2022)
Equipment for crop protection - Knapsack sprayers - Part 3: Inspection of knapsack
sprayers in use (ISO/DIS 19932-3:2022)
Pflanzenschutzgeräte - Tragbare Geräte - Teil 3: Kontrolle von in Gebrauch befindlichen
Geräten (ISO/DIS 19932-3:2022)
Matériel de protection des cultures - Pulvérisateurs à dos - Partie 3: Contrôle des
pulvérisateurs portables à dos en service (ISO/DIS 19932-3:2022)
Ta slovenski standard je istoveten z: prEN ISO 19932-3
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN ISO 19932-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19932-3:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19932-3:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19932-3
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-06-20 2022-09-12
Equipment for crop protection — Knapsack sprayers —
Part 3:
Inspection of knapsack sprayers in use
Matériel de protection des cultures — Pulvérisateurs à dos —
Partie 3: Contrôle des pulvérisateurs portables à dos en service
ICS: ISO ics
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19932-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19932-3:2022
ISO/DIS 19932-3:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19932-3
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Equipment for crop protection — Knapsack sprayers —
Part 3:
Inspection of knapsack sprayers in use
Matériel de protection des cultures — Pulvérisateurs à dos —
Partie 3: Contrôle des pulvérisateurs portables à dos en service
ICS: ISO ics
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19932-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19932-3:2022
ISO/DIS 19932-3:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.