EN 16603-31-02:2018
(Main)Space engineering - Two-phase heat transport equipment
Space engineering - Two-phase heat transport equipment
This standard defines requirements for two-phase heat transportation equipment (TPHTE), for use in spacecraft thermal control.
This standard is applicable to new hardware qualification activities.
Requirements for mechanical pump driven loops (MPDL) are not included in the present version of this Standard.
This standard includes definitions, requirements and DRDs from ECSS-E-ST-10-02, ECSS-E-ST-10-03, and ECSS-E-ST-10-06 applicable to TPHTE qualification. Therefore, these three standards are not applicable to the qualification of TPHTE.
This standard also includes definitions and part of the requirements of ECSS-E-ST-32-02 applicable to TPHTE qualification.
ECSS-E-ST-32-02 is therefore applicable to the qualification of TPHTE.
This standard does not include requirements for acceptance of TPHTE.
This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.
Raumfahrttechnik - Ausrüstung für Zwei-Phasen-Wärmetransport
Ingénierie spatiale - Équipements de transfert de chaleur diphasique
Vesoljska tehnika - Oprema za dvofazni toplotni transport
Ta standard določa zahteve za opremo za dvofazni toplotni transport (TPHTE) za uporabo pri toplotnem nadzoru vesoljskih plovil. Ta standard se uporablja za dejavnosti, povezane s kvalifikacijo nove strojne opreme. Zahteve za zanke s pogonom prek mehanskih črpalk (MPDL) niso vključene v trenutno različico tega standarda. Ta standard vključuje definicije, zahteve in dokumente z definicijami zahtev iz standardov ECSS-E-ST-10-02, ECSS-E-ST-10-03 in ECSS-E-ST-10-06, ki se uporabljajo za kvalifikacijo TPHTE. Zato se ti trije standardi ne uporabljajo za kvalifikacijo TPHTE. Ta standard vključuje tudi definicije in del zahtev standarda ECSS-E-ST-32-02, ki se uporabljajo za kvalifikacijo TPHTE. ECSS-E-ST-32-02 se zato uporablja za kvalifikacijo TPHTE. Ta standard ne vključuje zahtev za sprejetje TPHTE. Ta standard se lahko prilagodi posameznim lastnostim in omejitvam vesoljskega projekta v skladu s standardom ECSS-S-ST-00.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16603-31-02:2018
01-november-2018
1DGRPHãþD
SIST EN 16603-31-02:2015
Vesoljska tehnika - Oprema za dvofazni toplotni transport
Space engineering - Two-phase heat transport equipment
Raumfahrttechnik - Ausrüstung für Zwei-Phasen-Wärmetransport
Ingénierie spatiale - Equipements de transfert de chaleur à deux phases
Ta slovenski standard je istoveten z: EN 16603-31-02:2018
ICS:
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16603-31-02:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16603-31-02:2018
---------------------- Page: 2 ----------------------
SIST EN 16603-31-02:2018
EUROPEAN STANDARD
EN 16603-31-02
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2018
ICS 49.140
Supersedes EN 16603-31-02:2015
English version
Space engineering - Two-phase heat transport equipment
Ingénierie spatiale - Equipements de transfert de Raumfahrttechnik - Ausrüstung für Zwei-Phasen-
chaleur à deux phases Wärmetransport
This European Standard was approved by CEN on 11 July 2018.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2018 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN 16603-31-02:2018 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16603-31-02:2018
EN 16603-31-02:2018 (E)
Table of contents
European Foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 9
3.1 Terms defined in other standards . 9
3.2 Terms specific to the present standard . 10
3.3 Abbreviated terms. 13
4 TPHTE verification principles . 15
4.1 TPHTE categorization . 15
4.2 Involved organizations . 15
4.3 Generic requirements in this standard . 16
4.4 TPHTE qualification principles . 17
4.4.1 Processes, number of qualification units . 17
4.4.2 Thermal and mechanical qualification . 17
4.5 TPHTE acceptance principles . 21
5 Requirements for qualification activity . 22
5.1 Technical specification (TS) . 22
5.1.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.