Laminate floor coverings - Test method for the determination of micro-scratch resistance

This document specifies a test method for the micro-scratch resistance with two procedures (A and B) and a test method for polishing resistance (procedure C) which can be used for all types of laminate floor coverings. The resistance to polishing is related to mat surfaces.

Laminatböden - Prüfverfahren zur Bestimmung der Mikrokratzbeständigkeit

Dieses Dokument legt ein Prüfverfahren für die Mikrokratzbeständigkeit mit zwei Verfahren (A und B) und ein Prüfverfahren zur Beständigkeit gegen Aufpolieren (Verfahren C) fest, das für alle Arten von Laminatböden angewendet werden kann. Die Beständigkeit gegen Aufpolieren bezieht sich auf matte Oberflächen.

Revêtements de sol stratifiés - Méthode d'essai pour la détermination de la résistance aux micro-rayures

Le présent document spécifie une méthode d'essai de résistance aux micro-rayures comportant deux modes opératoires (A et B), ainsi qu'une méthode d'essai de résistance au polissage (mode opératoire C) ; ces méthodes peuvent être utilisées pour tous les types de revêtements de sol stratifiés. La résistance au polissage concerne les surfaces mates.

Laminatne talne obloge - Preskusna metoda za ugotavljanje odpornosti proti mikropraskam

General Information

Status
Published
Publication Date
29-Jun-2021
Withdrawal Date
30-Dec-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
30-Jun-2021
Due Date
09-Apr-2022
Completion Date
30-Jun-2021

Relations

Buy Standard

Standard
EN 16094:2021
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 16094:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16094:2021
01-september-2021
Nadomešča:
SIST EN 16094:2012
Laminatne talne obloge - Preskusna metoda za ugotavljanje odpornosti proti
mikropraskam
Laminate floor coverings - Test method for the determination of micro-scratch resistance
Laminatböden - Prüfverfahren zur Bestimmung der Mikrokratzbeständigkeit
Revêtements de sol stratifiés - Méthode d'essai pour la détermination de la résistance
aux micro-rayures
Ta slovenski standard je istoveten z: EN 16094:2021
ICS:
97.150 Talne obloge Floor coverings
SIST EN 16094:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16094:2021

---------------------- Page: 2 ----------------------
SIST EN 16094:2021


EN 16094
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2021
EUROPÄISCHE NORM
ICS 97.150 Supersedes EN 16094:2012
English Version

Laminate floor coverings - Test method for the
determination of micro-scratch resistance
Revêtements de sol stratifiés - Méthode d'essai pour la Laminatböden - Prüfverfahren zur Bestimmung der
détermination de la résistance aux micro-rayures Mikrokratzbeständigkeit
This European Standard was approved by CEN on 30 May 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16094:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16094:2021
EN 16094:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Apparatus and materials . 5
5.1 Martindale tester . 5
5.2 Holder for scrub material . 5
5.3 Diffuse light source. 5
5.4 Reflectometer . 5
5.5 Positioning device . 5
5.6 Scrub materials . 6
5.7 Double-sided tape . 6
5.8 Soft cotton cloth .
...

SLOVENSKI STANDARD
oSIST prEN 16094:2020
01-maj-2020
Laminatne talne obloge - Preskusna metoda za ugotavljanje odpornosti proti
mikropraskam
Laminate floor coverings - Test method for the determination of micro-scratch resistance
Laminatböden - Prüfverfahren zur Bestimmung der Mikrokratzbeständigkeit
Revêtements de sol stratifiés - Méthode d'essai pour la détermination de la résistance
aux micro-rayures
Ta slovenski standard je istoveten z: prEN 16094
ICS:
97.150 Talne obloge Floor coverings
oSIST prEN 16094:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16094:2020

---------------------- Page: 2 ----------------------
oSIST prEN 16094:2020


DRAFT
EUROPEAN STANDARD
prEN 16094
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2020
ICS 97.150 Will supersede EN 16094:2012
English Version

Laminate floor coverings - Test method for the
determination of micro-scratch resistance
Revêtements de sol stratifiés - Méthode d'essai pour la Laminatböden - Prüfverfahren zur Bestimmung der
détermination de la résistance aux micro-rayures Mikrokratzbeständigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16094:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16094:2020
prEN 16094:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 5
5 Apparatus and materials . 5
5.1 Martindale tester . 5
5.2 Holder for scrub material . 5
5.3 Diffuse light source. 5
5.4 Reflectometer . 5
5.5 Positioning device . 5
5.6 Scrub materials .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.