Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods

This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2.
It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging.
Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas.

Laminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-Basis - Spezifikationen, Anforderungen und Prüfverfahren

Diese Europäische Norm legt Eigenschaften, Anforderungen und Prüfverfahren für Laminatböden mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-Basis fest, wie in 3.1 und 3.1.1 definiert. Sie enthält ein Klassifizierungssystem, das auf EN ISO 10874 basiert, mit praktischen Anforderungen für bestimmte Verwen-dungsbereiche und Beanspruchungsklassen. Dies dient dazu aufzuzeigen, in welchen Bereichen Laminatböden zufriedenstellend eingesetzt werden können, sowie dazu, den Verbraucher in die Lage zu versetzen, informiert eine Auswahl zu treffen. Sie legt ebenfalls Anforderungen an Kennzeichnung und Verpackung fest.
Für Laminatböden werden die Anwendungsgebiete "Wohnen" und "Gewerblich" berücksichtigt, z. B. für die Verwendung in Küchen im Wohnbereich. Diese Norm legt keine Anforderungen für Bereiche fest, die regelmäßig Nässe ausgesetzt sind wie etwa Badezimmer, Hauswirtschaftsräume oder Saunen.

Revêtements de sol stratifiés - Éléments à parement à base acrylique traités par des faisceaux d'électrons - Spécifications, exigences et méthodes d'essai

La présente Norme européenne spécifie les caractéristiques, exigences et méthodes d'essai relatives aux revêtements de sol stratifiés à parement à base acrylique traités par des faisceaux d'électrons tels que définis aux 3.1 et 3.2.
Elle comporte un système de classification fondé sur l’EN ISO 10874, qui donne les exigences pratiques relatives aux zones et niveaux d’utilisation, afin d’indiquer les cas où les revêtements de sol stratifiés peuvent être utilisés de manière satisfaisante et ainsi aider le consommateur à faire un choix en toute connaissance de cause. Elle spécifie également les exigences relatives au marquage et à l'emballage.
Les revêtements de sol stratifiés sont destinés à des usages domestiques et commerciaux, par exemple destinés à être utilisés dans une cuisine domestique. Néanmoins, la présente norme ne spécifie pas d'exigences relatives aux lieux soumis à une humidification fréquente, comme les salles de bain, les buanderies ou les saunas.

Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z elektronskim žarkom - Specifikacije, zahteve in preskusne metode

Ta evropski standard določa zahteve za laminatne talne obloge, kot je določeno v točki 3.1.
Vključuje sistem razvrščanja na podlagi standarda EN ISO 10874 ter podaja praktične zahteve za območja in ravni uporabe z namenom opredelitve področij zadovoljive uporabe laminatnih talnih oblog ter spodbude potrošnikov k sprejemanju utemeljenih odločitev. Določa tudi zahteve za označevanje in pakiranje.
Laminatne talne obloge so primerne za gospodinjsko in komercialno uporabo, npr. v kuhinjah v gospodinjstvih. Ta standard ne določa zahtev v zvezi z območji, ki se lahko zmočijo (npr. kopalnice, pralnice ali savne).

General Information

Status
Withdrawn
Publication Date
08-Mar-2016
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
22-Sep-2021

RELATIONS

Buy Standard

Standard
EN 14978:2016
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Laminatne talne obloge - Elementi z vrhnjo plastjo iz akrila, polimeriziranega z elektronskim žarkom - Specifikacije, zahteve in preskusne metodeLaminatböden - Elemente mit einer elektronenstrahlgehärteten Deckschicht auf Acryl-Basis - Spezifikationen, Anforderungen und PrüfverfahrenRevêtements de sol stratifiés - Éléments à parement à base acrylique traités par des faisceaux d'électrons - Spécifications, exigences et méthodes d'essaiLaminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:EN 14978:2016SIST EN 14978:2016en,fr,de01-maj-2016SIST EN 14978:2016SLOVENSKI

STANDARDSIST EN 14978:20061DGRPHãþD
SIST EN 14978:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14978
March
t r s x ICS
{ yä s w r Supersedes EN
s v { y zã t r r xEnglish Version

Laminate floor coverings æ Elements with acrylic based surface layerá electron beam cured æ Specificationsá requirements and test methods Revêtements de sol stratifiés æ Éléments à parement à base acrylique traités par des faisceaux d 5électrons æ Spécificationsá exigences et méthodes d 5essai

Laminatböden æ Elemente mit einer elektronenstrahlgehärteten Deckschicht auf AcrylæBasis æ Spezifikationená Anforderungen und Prüfverfahren This European Standard was approved by CEN on

t y November
t r s wä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels

t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN

s v { y zã t r s x ESIST EN 14978:2016

EN 14978:2016 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 1 Scope .................................................................................................................................................................... 4 2 Normative references .................................................................................................................................... 4 3 Terms and definitions ................................................................................................................................... 5 4 Characteristics ................................................................................................................................................. 6 5 Classification ..................................................................................................................................................... 6 5.1 General ................................................................................................................................................................ 6 5.2 Floor coverings with a common gloss level ........................................................................................... 6 5.3 Floor coverings with a high gloss level .................................................................................................... 7 6 Additional characteristics and requirements ....................................................................................... 8 7 Marking, designation and packaging ....................................................................................................... 8 7.1 Marking ............................................................................................................................................................... 8 7.2 Packaging ........................................................................................................................................................... 9 8 Test report ......................................................................................................................................................... 9 Bibliography ................................................................................................................................................................. 10

SIST EN 14978:2016

EN 14978:2016 (E) 3 European foreword This document (EN 14978:2016) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflicting national standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14978:2006. Compared to EN 14978:2006 the following changes have been made: a) general definition for laminate floor coverings included; b) defined underlay for impact resistance test with the large diameter ball added; c) requirements for castor chair test changed; d) requirements for level of use 32 and 33 for floor coverings with a high gloss level added; e) test method and requirements for abrasion resistance for floor coverings with a high gloss level changed; f) requirements for cigarette resistance deleted; g) technical characteristic micro-scratch resistance added. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14978:2016

EN 14978:2016 (E) 4 1 Scope This European Standard specifies characteristics, requirements and test methods for laminate floor coverings with acrylic based surface layer, electron beam cured as defined in 3.1 and 3.2.

It includes a classification system based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice. It also specifies requirements for marking and packaging. Laminate floor coverings are considered for domestic and commercial levels of use, e.g. for use in domestic kitchens. This standard does not specify requirements related to areas that are subject to frequent wetting, such as bathrooms, laundry rooms or saunas. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 322, Wood-based panels - Determination of moisture content EN 424, Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg EN 425:2002, Resilient and laminate floor coverings - Castor chair test EN 438 (all parts), High-pressure decorative laminates (HPL) — Sheets based on thermosetting resins (Usually called Laminates) EN 13329:2016, Laminate floor coverings — Elements with a surface layer based on aminoplastic thermosetting resins — Specifications, requirements and test methods EN 15468:2016, Laminate floor coverings — Elements with directly applied printing and resin surface layer — Specifications, requirements and test methods EN 16094, Laminate floor coverings - Test method for the determination of micro-scratch resistance CEN/TS 16354, Laminate floor coverings - Underlays - Specification, requirements and test methods EN ISO 2813, Paints and varnishes - Determination of glos

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.