Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements

This European Standard specifies, as for Home or Building Electronic Systems (HBES) for the domain of Building Automation and Control System Application and Building Management (BACS), common rules for a class of multi-application bus systems where the functions are decentralised and linked through a common communication process. This European Standard sets the basic requirements for products and systems. The requirements may also apply to the distributed functions of any equipment connected in a home or building control system if no specific standard exists for this equipment or system.
Due to its reference to the EN 50090 series, this European Standard sets requirements for the BACS area in relation to Architecture and Hardware and Application and Communication of systems based on HBES amongst other areas, and specifies the basic requirements for interoperability (between products and systems).
Aspects such as environmental conditions/external influences, electrical safety, EMC, etc. also used to be covered by EN 50090-2-2, which will be superseded by the now available EN 50491 series. The latter European Standards series was jointly developed by CENELEC/TC 205 and CEN/TC 247 and will in the future also include aspects like functional safety in normal use (now contained in the EN 50090-2-3). The EN 50491 series applies, together with the relevant product standard for devices, if applicable.

Offene Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Elektrische Systemtechnik für Heim und Gebäude - Teil 1: Produkt- und Systemanforderungen

Ebenso wie für die Elektrische Systemtechnik für Heim und Gebäude (ESHG) stellt die vorliegende Europäische Norm auch für den Bereich von Systemen der Gebäudeautomation (GA) und Gebäudemanagement allgemeine Regeln für eine Kategorie mehrfach anwendbarer Bussysteme zur Verfügung, bei denen die Funktionen dezentral angeordnet und durch einen normalen Kommunikationsprozess miteinander verbunden sind. Diese Europäische Norm legt die Grundanforderungen an Produkte und Systeme fest. Die Anforderungen können auch für die dezentralen Funktionen von mit einem Heim- oder Gebäudeautomationssystem verbundenen Einrichtungen gelten, wenn es für diese Einrichtungen oder für dieses System keine spezifische Norm gibt.
Diese Europäische Norm bestimmt aufgrund ihres Bezugs auf die EN 50090-Reihe die Anforderungen hinsichtlich der Architektur und Hardware, Anwendung und Kommunikation von ESHG-basierten Systemen für den GA-Bereich, indem unter anderem grundlegende Anforderungen für die Interoperabilität (zwischen Produkten und Systemen) festgelegt werden.
Aspekte wie Umweltbedingungen/Einwirkungen von außen, elektrische Sicherheit, EMV usw. waren ebenfalls Teil der EN 50090-2-2, die durch die neue EN 50491-Serie ersetzt wird. Die zuletzt genannte Europäische Normenreihe wurde in Zusammenarbeit von CENELEC/TC 205 und CEN/TC 247 erarbeitet und wird zukünftig auch Aspekte wie die funktionelle Sicherheit bei normalem Gebrauch (bisher in EN 50090-2-3 enthalten) einschließen. Die EN 50491-Reihe gilt zusammen mit der entsprechenden Produktnorm des Gerätes, sofern eine solche vorliegt.

Réseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Systèmes électroniques pour la maison et le bâtiment - Partie 1: Spécification des produits et des systèmes

Cette norme Européenne spécifie, comme pour les  systèmes électroniques pour les foyers domestiques et les bâtiments (HBES), pour le domaine des Building Automation and Control System Application and Building Management (BACS – systèmes de gestion technique du bâtiment), des règles communes pour une classe de systèmes de bus multi-applications où les fonctions sont décentralisées et connectées via un processus de communication commun. La présente Norme européenne définit les exigences de base applicables aux produits et aux systèmes. Ces exigences peuvent aussi s'appliquer aux fonctions distribuées de tout équipement connecté à un système de régulation d’une maison ou d'un bâtiment si aucune norme spécifique n'existe pour cet équipement ou ce système.
En conséquence de sa référence à la série des EN 50090, la présente Norme Européenne définit des exigences dans le domaine des BACS en relation avec l’architecture, le matériel, l’application et la communication des systèmes basés sur les HBES, parmi d’autres domaines et spécifie notamment les exigences de base en matière d'interopérabilité (entre produits et systèmes).
Les aspects tels que les conditions environnementales, les influences externes, la sécurité électrique, la CEM, etc. étaient auparavant également traités dans l'EN 50090-2-2, qui sera remplacée par la série des EN 50491 désormais disponible. Cette série de normes européennes a été élaborée conjointement par le CENELEC/TC 205 et le CEN/TC 247 et, à l'avenir, intègrera également des aspects tels que la sécurité fonctionnelle dans les conditions normales d'utilisation (actuellement traités dans l'EN 50090-2-3). La série des EN 50491 s'applique en association avec la norme de produit applicable à l'appareil concerné, si elle existe.

Odprta izmenjava podatkov v avtomatizaciji stavb in izvršnih elementov ter pri upravljanju stavb - Elektronski sistemi za stanovanja in stavbe - 1. del: Zahteve za proizvode in sisteme

Ta evropski standard določa skupna pravila za elektronske sisteme za stanovanja in stavbe (HBES), za področje stavbnih sistemov avtomatizacije in nadzora (BACS) in z njimi povezan razred večaplikacijskih sistemov vodil, v katerem so funkcije decentralizirane in povezane prek skupnega komunikacijskega procesa. Ta evropski standard določa osnovne zahteve za izdelke in sisteme. Zahteve se lahko uporabljajo tudi za porazdeljene funkcije katere koli opreme, priključene na stanovanjski ali stavbni sistem nadzora, če za to opremo ali sistem ne obstaja poseben standard. Ta evropski standard, ki se nanaša na skupino standardov EN 50090, določa zahteve na področju stavbnih sistemov avtomatizacije in nadzora v zvezi z arhitekturo in strojno opremo ter uporabo in komunikacijo za sisteme, ki med drugim temeljijo na elektronskih sistemih za stanovanja in stavbe, ter osnovne zahteve za interoperabilnost (med izdelki in sistemi). Standard EN 50090-2-2, ki ga je nadomestila skupina standardov EN 50491, je zajemal tudi vidike, kot so okoljski pogoji/zunanji vplivi, električna varnost, elektromagnetna združljivost (EMC) itd. Navedeno skupino evropskih standardov sta skupaj razvila odbora CENELEC/TC 205 in CEN/TC 247, v prihodnosti pa bodo vanjo vključeni vidiki, kot je funkcionalna varnost pri običajni uporabi (ki je zdaj vključena v standard EN 50090-2-3). Skupina standardov EN 50491 se uporablja skupaj z ustreznim standardom za proizvode (za naprave), če je to primerno.

General Information

Status
Withdrawn
Publication Date
02-Oct-2012
Withdrawal Date
02-Mar-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
03-Mar-2021

Relations

Buy Standard

Standard
EN 13321-1:2013
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Odprta izmenjava podatkov v avtomatizaciji stavb in izvršnih elementov ter pri upravljanju stavb - Elektronski sistemi za stanovanja in stavbe - 1. del: Zahteve za proizvode in sistemeOffene Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Elektrische Systemtechnik für Heim und Gebäude - Teil 1: Produkt- und SystemanforderungenRéseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Systèmes électroniques pour la maison et le bâtiment - Partie 1: Spécification des produits et des systèmesOpen data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements97.120Avtomatske krmilne naprave za domAutomatic controls for household use35.240.99IT applications in other fieldsICS:Ta slovenski standard je istoveten z:EN 13321-1:2012SIST EN 13321-1:2013en,fr,de01-februar-2013SIST EN 13321-1:2013SLOVENSKI
STANDARDSIST EN 13321-1:20061DGRPHãþD



SIST EN 13321-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13321-1
October 2012 ICS 35.240.99; 97.120 Supersedes EN 13321-1:2006English Version
Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements
Réseau ouvert de communication de données pour l'automatisation, la régulation et la gestion technique du bâtiment - Systèmes électroniques pour la maison et le bâtiment - Partie 1: Spécification des produits et des systèmes
Offene Datenkommunikation für die Gebäudeautomation und Gebäudemanagement - Elektrische Systemtechnik für Heim und Gebäude - Teil 1: Produkt- und Systemanforderungen This European Standard was approved by CEN on 17 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13321-1:2012: ESIST EN 13321-1:2013



EN 13321-1:2012 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Requirements .6Annex A (informative)
General safety requirements and environmental conditions .7Annex B (normative)
Maintenance procedure applicable to this European Standard .8Annex C (normative)
List of referenced CENELEC/TC 205 European Standards .9Annex D (informative)
Other related (but not referenced) CENELEC/TC 205 HBES European Standards . 11 SIST EN 13321-1:2013



EN 13321-1:2012 (E) 3 Foreword This document (EN 13321-1:2012) has been prepared by Technical Committee CEN/TC 247 “Building Automation, Controls and Building Management”, the secretariat of which is held by SNV. This European Standard shall be given the status of a national sta
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.