Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines

This part of EN 12629, taken together with EN 12629-1:2000+A1, applies to pipe prestressing machines as defined in Clause 3.
EN 12629-1:2000+A1 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium silicate.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1 specific to the machines it covers.
1.2   This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard establishes safety requirements and/or methods of protection which applies to these machines.
1.3   This European standard applies to the concrete pipe prestressing machines which may form an integral part of a pipe making process plant.
1.4   This document is not applicable to pipe prestressing machines, which are manufactured before the date of publication of this document by CEN.

Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-3: Maschinen zum Vorspannen von Rohren

Dieser Teil von EN 12629, zusammen mit EN 12629-1:2000+A1:2010, gilt für Maschinen zum
Vorspannen von Rohren, wie in Abschnitt 3 definiert.
EN 12629-1:2000+A1:2010 spezifiziert allgemeine Anforderungen, die für Maschinen für die Herstellung von
Bauprodukten aus Beton und Kalksandsteinmassen gelten.
Dieses Dokument beschreibt die zusätzlichen Anforderungen für und/oder Abweichungen von
EN 12629-1:2000+A1:2010, die spezifisch für die Maschinen sind, die es abdeckt."
1.2 !Diese Europäische Norm behandelt alle signifikanten Gefährdungen, die auf diese Maschinen
zutreffen, wenn sie bestimmungsgemäß und unter den Bedingungen des Missbrauchs, die vernünftigerweise
vom Hersteller vorhersehbar sind, verwendet werden (siehe Abschnitt 4). Diese Europäische Norm spezifiziert
die entsprechenden technischen Maßnahmen zur Beseitigung oder Verminderung der Risiken, die von den
signifikanten Gefährdungen ausgehen."
!gestrichener Text"
Diese Norm legt Sicherheitsanforderungen und/oder Schutzverfahren fest, die für diese Maschinen gelten.
1.3 Diese Europäische Norm gilt für Maschinen zum Vorspannen von Rohren, die als integraler Bestandteil
einer Rohrherstellungsanlage dienen können.
1.4 !Dieses Dokument gilt nicht für Maschinen zum Vorspannen von Rohren, die vor dem Datum der
Veröffentlichung dieses Dokuments durch CEN hergestellt wurden."

Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-3: Machines pour la précontrainte des tuyaux

!La présente partie de l'EN 12629, utilisée avec l'EN 12629-1:2000+A1:2010, s'applique aux machines
pour la précontrainte des tuyaux telles que définies à l'Article 3.
L'EN 12629-1:2000+A1 spécifie les prescriptions générales applicables aux machines pour la fabrication de produits
de construction en béton et silico-calcaire.
Le présent document spécifie les prescriptions supplémentaires et/ou les dérogations à l’EN 12629-1:2000+A1:2010
spécifiques aux machines concernées."
1.2 !La présente Norme européenne traite tous les phénomènes dangereux significatifs spécifiques à ces
machines, lorsqu’elles sont utilisées normalement et dans des conditions de mauvais usage que le fabricant peut
raisonnablement prévoir (voir Article 4). La présente Norme européenne spécifie les mesures techniques appropriées
pour éliminer ou réduire les risques dus aux phénomènes dangereux significatifs."
!texte supprimé"
La présente Norme spécifie les prescriptions de sécurité et/ou méthodes de protection qui s’appliquent à ces
machines.
1.3 La présente Norme européenne s’applique aux machines de précontrainte des tuyaux qui peuvent former
partie intégrante d’une installation de fabrication de tuyaux.
1.4 !Le présent document ne s'applique pas aux machines pour la précontrainte des tuyaux fabriquées avant
la date de publication du présent document par le CEN."

Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 5-3. del: Stroji za izdelavo cevi iz prednapetega betona

Ta del EN 12629 skupaj z EN 12629-1:2000+A1:2010 velja za stroje za izdelavo cevi iz prednapetega betona, kot je opredeljeno v Klavzuli 3. EN 12629-1:2000+A1:2010 določa splošne zahteve, ki veljajo za stroje za izdelavo gradbenih proizvodov iz betona in apnenega peščenca. Ta dokument določa dodatne zahteve in/ali odstopanja od EN 12629-1:2000+A1:2010, specifične za stroje, ki jih zajema. Ta evropski standard obravnava vse pomembne nevarnosti, ki se nanašajo na te stroje, kadar se uporabljajo kot predvideno in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej Klavzulo 4). Ta evropski standard določa primerne tehnične ukrepe za odpravo ali zmanjševanje tveganj, ki se pojavijo zaradi pomembnih nevarnosti. Ta standard vzpostavlja varnostne zahteve in/ali zaščitne metode, ki veljajo za te stroje. Ta evropski standard velja za stroje za izdelavo cevi iz prednapetega betona, ki so lahko integralni del predelovalnega obrata za izdelavo cevi. Ta dokument ne velja za stroje za izdelavo cevi iz prednapetega betona, ki so bili izdelani pred datumom, ko je CEN objavil ta dokument.

General Information

Status
Published
Publication Date
31-Aug-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
19-May-2021

Relations

Buy Standard

Standard
EN 12629-5-3:2004+A1:2010
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-3: Maschinen zum Vorspannen von RohrenMachines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-3: Machines pour la précontrainte des tuyauxMachines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines91.220Gradbena opremaConstruction equipmentICS:Ta slovenski standard je istoveten z:EN 12629-5-3:2003+A1:2010SIST EN 12629-5-3:2004+A1:2010en,fr01-december-2010SIST EN 12629-5-3:2004+A1:2010SLOVENSKI
STANDARD



SIST EN 12629-5-3:2004+A1:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12629-5-3:2003+A1
September 2010 ICS 91.220 Supersedes EN 12629-5-3:2003English Version
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-3: Machines pour la précontrainte des tuyaux
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-3: Maschinen zum Vorspannen von Rohren This European Standard was approved by CEN on 3 November 2003 and includes Amendment 1 approved by CEN on 5 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12629-5-3:2003+A1:2010: ESIST EN 12629-5-3:2004+A1:2010



EN 12629-5-3:2003+A1:2010 (E) 2 Contents page Foreword . 3Introduction . 41Scope . 52Normative references . 53Terms and definitions . 54List of significant hazards . 65!!!!Safety requirements and/or protective measures"""" . 85.1General . 85.2Prestressing equipment . 95.3Radial prestressing machines . 96!!!!Verification of safety requirements and/or protective measures"""" . 107Information for use . 108Marking . 10Annex A (informative)
Definitions of terms .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.