Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment

This document, to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery and continuous handling equipment for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the specific information (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN 1009-1:2020, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1:2020 for machines that have been designed and built according to the provisions of this document.
This document, together with EN 1009-1:2020, deals with all the significant hazards, hazardous situations and events relevant to feeding machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Annex C).
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 1   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document is not applicable to feeding machinery and continuous handling equipment which are manufactured before the date of publication of this document by CEN.

Maschinen für die mechanische Aufbereitung von Mineralien und ähnlichen festen Stoffen - Sicherheit - Teil 2: Spezifische Anforderungen für Aufgabemaschinen und Stetigförderer

Dieses Dokument, das zusammen mit EN 1009 1 anzuwenden ist, legt die Sicherheitsanforderungen und ihre Überprüfung für die Konstruktion und den Bau von Aufgabemaschinen und Stetigförderern zur mechanischen Aufbereitung im Sinne von Abbau, Recycling und Aufbereitung von Mineralien und Nebenprodukten fest. Zusätzlich legt es fest, welche spezifischen Informationen (einschließlich Restgefahren) vom Hersteller zur Verfügung zu stellen sind.
Wenn Anforderungen dieses Dokuments von in EN 1009 1:2020 beschriebenen abweichen, haben die Anforderungen dieses Teils der EN 1009 für Maschinen, die nach den Anforderungen dieses Dokuments konstruiert und gebaut wurden, Vorrang vor den Anforderungen von EN 1009 1:2020.
Dieses Dokument befasst sich zusammen mit EN 1009 1:2020 mit allen signifikanten Gefährdungen, Gefährdungssituationen und -ereignissen, die für Aufgabemaschinen gelten, wenn sie bestimmungsgemäß und unter den vom Hersteller vorhersehbaren Bedingungen verwendet werden (siehe Anhang C).
Dieses Dokument behandelt nicht:
- Konstruktion in Verbindung mit Straßenverkehrsvorschriften;
- Gefährdungen, die durch den Gebrauch der Maschinen in explosionsgefährdeter Umgebung, die Aufbereitung explosiver Materialien und durch Risiken in Bezug auf elektromagnetische Verträglichkeit entstehen;
- spezifische Gefährdungen in Verbindung mit mobilen Maschinen.
ANMERKUNG 1 EN ISO 13766 1 und EN ISO 13766 2 legen Prüfverfahren und Abnahmekriterien zur Bewertung der elektromagnetischen Verträglichkeit für alle Arten mobiler Baumaschinen fest.
ANMERKUNG 2 prEN 1009 6 „Spezifische Anforderungen für mobile und semi-mobile Anlagen“ ist in Vorbereitung, um spezifische Anforderungen (z. B. Beweglichkeit, Bremsen, Zugang, häufiger Transport) einschließlich Ausnahmen und zusätzliche Anforderungen an mobile und semi-mobile Anlagen abzudecken. Dies bedeutet, dass mobile Maschinen nicht behandelt werden, solange EN 1009 6 nicht von CEN veröffentlicht wurde.
Dieses Dokument gilt nicht für Aufgabemaschinen und Stetigförderer, die vor dem Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.

Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 2 : Prescriptions spécifiques pour les machines d'alimentation et équipements de manutention continue

Le présent document, à utiliser conjointement avec l'EN 1009-1, spécifie les prescriptions de sécurité et leur vérification pour la conception et la construction de machines d'alimentation et équipements de manutention continue pour le traitement mécanique pour l'extraction, le recyclage et le traitement des minéraux et sous-produits. En outre, le présent document spécifie les informations spécifiques (incluant les risques résiduels) que le fabricant doit fournir.
Lorsque des prescriptions du présent document diffèrent de celles spécifiées dans l'EN 1009-1:2020, les prescriptions de la présente partie de l'EN 1009 prévalent sur les prescriptions de l'EN 1009-1:2020 pour les machines conçues et fabriquées conformément aux dispositions de la présente partie du présent document.
Le présent document, utilisé conjointement avec l'EN 1009-1:2020, traite de tous les phénomènes dangereux et situations et événements dangereux significatifs inhérents aux machines d'alimentation dans le cadre d'une utilisation normale et des conditions prévues par le fabricant (voir l'Annexe C).
Le présent document ne couvre pas:
-   la conception relative à la réglementation de la circulation routière ;
-   les risques liés à l'utilisation des machines en atmosphères explosibles ainsi qu'à la transformation de matières explosives et les risques liés à la compatibilité électromagnétique ;
-   risques spécifiques liés aux machines mobiles.
NOTE 1   Les EN ISO 13766-1 et EN ISO 13766-2 spécifient des méthodes d'essai et des critères d'acceptation pour l'évaluation de la compatibilité électromagnétique de tous les types de machines mobiles pour la construction.
NOTE 2   Le prEN 1009-6 "Prescriptions spécifiques pour machines mobiles" est en préparation pour couvrir les prescriptions spécifiques (par exemple, mobilité, freinage, accès, transport fréquent), y compris les exceptions et prescriptions supplémentaires pour les équipements mobiles et semi mobiles. Cela signifie que les machines mobiles ne sont pas couvertes tant que l'EN 1009-6 ne sera pas publiée par le CEN.
Le présent document ne s'applique pas aux machines d'alimentation et équipements de manutention continue fabriqués avant sa date de publication par le CEN.

Stroji za mehansko obdelavo mineralov in podobnih trdnih snovi - Varnost - 2. del: Posebne zahteve za nakladalne stroje in opremo za kontinuirni transport

General Information

Status
Published
Publication Date
26-May-2020
Withdrawal Date
30-May-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-May-2020
Due Date
22-Jan-2020
Completion Date
27-May-2020

Relations

Buy Standard

Standard
EN 1009-2:2020
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1009-2:2018
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1009-2:2020
01-september-2020
Stroji za mehansko obdelavo mineralov in podobnih trdnih snovi - Varnost - 2. del:
Posebne zahteve za nakladalne stroje in opremo za kontinuirni transport
Machines for mechanical processing of minerals and similar solid materials - Safety -
Part 2: Specific requirements for feeding machinery and continuous handling equipment
Maschinen für die mechanische Aufbereitung von Mineralien und ähnlichen festen
Stoffen - Sicherheit - Teil 2: Spezifische Anforderungen für Aufgabemaschinen und
Stetigförderer
Machines pour le traitement mécanique des minéraux et des matériaux solides similaires
- Sécurité - Partie 2 : Prescriptions spécifiques pour les machines d'alimentation et
équipements de manutention continue
Ta slovenski standard je istoveten z: EN 1009-2:2020
ICS:
13.110 Varnost strojev Safety of machinery
73.120 Oprema za predelavo rudnin Equipment for processing of
minerals
91.220 Gradbena oprema Construction equipment
SIST EN 1009-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1009-2:2020

---------------------- Page: 2 ----------------------
SIST EN 1009-2:2020


EN 1009-2
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 73.120; 91.220
English Version

Machines for mechanical processing of minerals and
similar solid materials - Safety - Part 2: Specific
requirements for feeding machinery and continuous
handling equipment
Machines pour le traitement mécanique des minéraux Maschinen für die mechanische Aufbereitung von
et des matières solides similaires - Sécurité - Partie 2 : Mineralien und ähnlichen festen Stoffen - Sicherheit -
Prescriptions spécifiques pour les machines Teil 2: Spezifische Anforderungen für
d'alimentation et équipements de manutention Aufgabemaschinen und Stetigförderer
continue
This European Standard was approved by CEN on 13 April 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1009-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1009-2:2020
EN 1009-2:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Safety requirements and/or protective/risk reduction measures . 7
4.1 General . 7
4.2 Vibrating feeders . 8
4.3 Reciprocating plate feeders.
...

SLOVENSKI STANDARD
oSIST prEN 1009-2:2018
01-januar-2018
Stroji za mehansko obdelavo mineralov in podobnih trdnih snovi - Varnost - 2. del:
Posebne zahteve za nakladalne stroje in opremo za kontinuirni transport
Machines for mechanical processing of minerals and similar solid materials - Safety -
Part 2: Specific requirements for feeding machinery and continuous handling equipment
Maschinen für die mechanische Aufbereitung von Mineralien und ähnlichen festen
Stoffen - Sicherheit - Teil 2: Spezifische Anforderungen für Aufgabemaschinen und
Stetigförderer
Machines pour le traitement mécanique des minéraux et des matériaux solides similaires
- Sécurité - Partie 2 : Prescriptions spécifiques pour les machines d'alimentation et
équipements de manutention continue
Ta slovenski standard je istoveten z: prEN 1009-2
ICS:
13.110 Varnost strojev Safety of machinery
73.120 Oprema za predelavo rudnin Equipment for processing of
minerals
91.220 Gradbena oprema Construction equipment
oSIST prEN 1009-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1009-2:2018

---------------------- Page: 2 ----------------------
oSIST prEN 1009-2:2018


DRAFT
EUROPEAN STANDARD
prEN 1009-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2017
ICS 73.120; 91.220
English Version

Machines for mechanical processing of minerals and
similar solid materials - Safety - Part 2: Specific
requirements for feeding machinery and continuous
handling equipment
Machines pour le traitement mécanique des minéraux Maschinen für die mechanische Aufbereitung von
et des matières solides similaires - Sécurité - Partie 2 : Mineralien und ähnlichen festen Stoffen - Sicherheit -
Prescriptions spécifiques pour les machines Teil 2: Spezifische Anforderungen für
d'alimentation et équipements de manutention Aufgabemaschinen und Stetigförderer
continue
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 151.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1009-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1009-2:2018
prEN 1009-2:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 List of significant hazards . 7
5 Safety requirements and/or protective measures .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.