prEN 16477-2

Glass in building - Painted glass for internal use - Part 2: Evaluation of conformity

This European Standard covers requirements, the evaluation of conformity and the factory production control of flat painted glass for internal use in buildings. NOTE: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply

Glas im Bauwesen - Farbiges Glas für den Innenbereich - Teil 2: Konformitätsbewertung

Diese Europäische Norm behandelt Anforderungen, die Konformitätsbewertung und die werkseigene Produktionskontrolle von farbigem Flachglas für den Innenbereich von Gebäuden.
ANMERKUNG   Für Glaserzeugnisse mit elektrischer/ n Verkabelung oder Anschlüssen, z. B. für Alarm- oder Heizungs¬anlagen, können andere Richtlinien, z. B. Niederspannungsrichtlinie, gelten.

Verre dans la construction - Verre laqué destiné à un usage à l’intérieur - Partie 2: Évaluation de la conformité

La présente Norme européenne spécifie les exigences, l’évaluation de la conformité et le contrôle de la production en usine du verre laqué plat destiné à un usage à l’intérieur des bâtiments.
NOTE   Pour les produits verriers équipés d’un câblage ou de branchements électriques, par exemple pour les alarmes ou le chauffage, d’autres directives, notamment la Directive Basse tension, peuvent s’appliquer.

Steklo v gradbeništvu - Poslikano steklo za interno uporabo - 2. del: Vrednotenje skladnosti

General Information

• Status: Not Published
• Publication Date: 09-Jun-2014
• Withdrawal Date: 09-Dec-2014
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 5 - Coated glass for mirrors
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 05-Sep-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 88/609/EEC - Limitation of emissions of certain pollutants into the air from large combustion plants
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: oSIST prEN 16477-2:2012 - Glass in building - Painted glass for internal use - Part 2: Evaluation of conformity

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16477-2:2012
01-oktober-2012
Steklo v gradbeništvu - Poslikano steklo za interno uporabo - 2. del: Vrednotenje
skladnosti
Glass in building - Painted glass for internal use - Part 2: Evaluation of conformity
Glas im Bauwesen - Farbiges Glas für den Innenbereich - Teil 2: Konformitätsbewertung
Verre dans la construction - Verre laqué destiné à un usage à l’intérieur - Partie 2:
Évaluation de la conformité
Ta slovenski standard je istoveten z: prEN 16477-2
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 16477-2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16477-2:2012

---------------------- Page: 2 ----------------------
oSIST prEN 16477-2:2012


EUROPEAN STANDARD
DRAFT
prEN 16477-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2012
ICS 81.040.20
English Version
Glass in building - Painted glass for internal use - Part 2:
Evaluation of conformity
Verre dans la construction - Verre laqué destiné à un usage Glas im Bauwesen - Farbiges Glas für den Innenbereich -
à l'intérieur - Partie 2: Évaluation de la conformité Teil 2: Konformitätsbewertung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16477-2:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16477-2:2012
prEN 16477-2:2012 (E)
Contents Page
Foreword .3
1 Scope .3
2 Normative references .3
3 Terms and definitions .4
4 Requirements .4
4.1 Product description .4
4.2 Conformity with the definition of painted glass .5
4.3 Determination of the characteristic's performances.5
4.3.1 Characterisitcs of painted glass .5
4.3.2 Determination of characteristics of painted glass .6
4.4 Durability .8
4.5 Dangerous substances .9
5 Evaluation o
...