EN ISO 13076:2019

Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2019)

This document specifies the lighting and the procedure for the visual assessment of degraded areas, spots or other defects on or in coatings.
This document is not applicable to the visual comparison of colour, which can be assessed using ISO 3668.
NOTE       See Annex A for examples of the possible applications of this document.

Beschichtungsstoffe - Beleuchtung und Durchführung für visuelle Abmusterungen von Beschichtungen (ISO 13076:2019)

Dieses Dokument legt die Beleuchtung und Durchführung für die visuelle Abmusterung geschädigter Flächen, Stellen oder anderer Schäden auf oder in Beschichtungen fest.
Dieses Dokument gilt nicht für den visuellen Farbvergleich, der nach ISO 3668 durchgeführt werden kann.
ANMERKUNG   Für Beispiele möglicher Anwendungen dieses Dokumentes siehe Anhang A.

Peintures et vernis - Éclairage et mode opératoire pour évaluations visuelles des revêtements (ISO 13076:2019)

Le présent document spécifie l'éclairage et le mode opératoire relatifs à l'évaluation visuelle des zones dégradées, taches ou autres défauts sur ou dans des revêtements.
Il ne s'applique pas à la comparaison visuelle des couleurs, qui peut être évaluée à l'aide de l'ISO 3668.
NOTE       Voir l'Annexe A pour des exemples d'applications possibles du présent document.

Barve in laki - Osvetlitev in postopek za vizualno ocenjevanje premazov (ISO 13076:2019)

Ta dokument določa osvetlitev in postopek za vizualno ocenjevanje poškodovanih območij, madežev ali drugih napak na/v premazu. Ta dokument se ne uporablja za vizualno primerjavo barve, ki jo je mogoče oceniti na podlagi standarda ISO 3668.

General Information

• Status: Published
• Publication Date: 29-Oct-2019
• Withdrawal Date: 29-Apr-2020
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 30-Oct-2019
• Due Date: 30-Oct-2019
• Completion Date: 30-Oct-2019
• Ref Project: SIST EN ISO 13076:2020 - Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2019)

Relations

• Replaces: EN ISO 13076:2012 - Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO 13076:2012)
• Effective Date: 13-Jun-2018

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2020
Nadomešča:
SIST EN ISO 13076:2012
Barve in laki - Osvetlitev in postopek za vizualno ocenjevanje premazov (ISO
13076:2019)
Paints and varnishes - Lighting and procedure for visual assessments of coatings (ISO
13076:2019)
Beschichtungsstoffe - Beleuchtung und Durchführung für visuelle Abmusterungen von
Beschichtungen (ISO 13076:2019)
Peintures et vernis - Éclairage et mode opératoire pour évaluations visuelles des
revêtements (ISO 13076:2019)
Ta slovenski standard je istoveten z: EN ISO 13076:2019
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 13076
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 13076:2012
English Version
Paints and varnishes - Lighting and procedure for visual
assessments of coatings (ISO 13076:2019)
Peintures et vernis - Éclairage et mode opératoire pour Beschichtungsstoffe - Beleuchtung und Durchführung
évaluations visuelles des revêtements (ISO für visuelle Abmusterungen von Beschichtungen (ISO
13076:2019) 13076:2019)
This European Standard was approved by CEN on 13 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13076:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 13076:2019) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13076:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13076:2019 has been approved by CEN as EN ISO 13076:2019 without any modification.

INTERNATIONAL ISO
STANDARD 13076
Second edition
2019-10
Paints and varnishes — Lighting and
procedure for visual assessments of
coatings
Peintures et vernis — Éclairage et mode opératoire pour évaluations
visuelles des revêtements
Reference number
ISO 13076:2019(E)
©
ISO 2019
ISO 13076:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 13076:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Procedure for visual assessment . 2
6.1 General . 2
6.2 Assessment in natural daylight . 2
6.3 Assessment under artificial lighting . 2
7 Test report . 2
Annex A (informative) Examples of applications . 4
Bibliography . 5
ISO 13076:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions r
...