EN 16288-2:2014
(Main)Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
This European Standard specifies the dimensions of the 28 mm screw finish for glass containers designated MCA 3 for pressurized or vacuum liquids for one way glass.
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 2: Einweg-MCA 3-(Glas-)Mundstück
Diese Europäische Norm legt die Maße des 28-mm-Schraubmundstückes für Einweg-Behältnisse aus Glas, bezeichnet mit MCA 3, für Flüssigkeiten unter Über- oder Unterdruck fest.
Emballage en verre - Bagues à vis pour capsules à pression - Partie 2: Bague MCA 3 pour verre perdu
La présente Norme européenne spécifie les dimensions de la bague à vis de 28 millimètres pour récipients en
verre perdu contenant des liquides sous pression ou sous vide, désignée sous l'appellation bague MCA 3.
Steklena embalaža - Grla z navojem za steklenice pod tlakom - 2. del: Nevračljiva steklena grla MCA 3
Standard EN 16299-2 določa mere za 28-mm grla z navojem za steklene posode MCA 3 za tekočine pod tlakom ali vakuumom za nevračljive steklenice.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 2: Einweg-MCA 3-MundstückEmballage en verre - Bague à vis pour capsules à pression - Partie 2: Bague MCA 3 pour verre perduGlass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16288-2:2014SIST EN 16288-2:2014en,fr,de01-julij-2014SIST EN 16288-2:2014SLOVENSKI
STANDARD
SIST EN 16288-2:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16288-2
March 2014 ICS 55.100 English Version
Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 3 finish
Emballage en verre - Bagues à vis pour capsules à pression - Partie 2: Bague MCA 3 pour verre perdu
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 2: Einweg-MCA 3-(Glas-)Mundstück This European Standard was approved by CEN on 12 January 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16288-2:2014 ESIST EN 16288-2:2014
EN 16288-2:2014 (E) 2 Contents
Page Foreword .3 Introduction .4 1 Scope .5 2 Terms and definitions .5 3 Dimensions .5 Bibliography . 10
SIST EN 16288-2:2014
EN 16288-2:2014 (E) 3 Foreword This document (EN 16288-2:2014) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2014 and conflicting national standards shall be withdrawn at the latest by September 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 16288, Glass packaging — Screw finishes for pressure capsules, consists of the following parts: — Part 1: Returnable glass MCA 3 finish — Part 2: One way glass MCA 3 finish According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16288-2:2014
EN 16288-2:2014 (E) 4 Introduction This European Standard is based on CE.T.I.E. (International Technical Centre for Bottling and related Packaging)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.