EN 16291-2:2013

Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish

This European Standard specifies the dimensions of the screw finish for glass containers designated MCA 2 for one way glass.

Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 2: Einweg-MCA 2-Mundstück

Diese Europäische Norm legt die Maße des Schraubmundstücks für Einweg-Behältnisse aus Glas, bezeichnet mit MCA 2, fest.

Emballage en verre - Bagues à vis pour capsules à pression - Partie 2: Bague MCA 2 pour verre perdu

La présente Norme européenne spécifie les dimensions de la bague à vis pour récipients en verre perdu, désignée sous l'appellation bague MCA 2.

Steklena embalaža - Grla z navojem za steklenice pod tlakom - 2. del: Nevračljiva steklenica z grlom MCA 2

Ta dokument določa mere za grla z navojem za steklene posode MCA 2 za nevračljive steklenice.

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2013
• Withdrawal Date: 25-Jul-2023
• ICS: 55.100 - Bottles. Pots. Jars
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 21 - Glass packaging
• Ref Project: SIST EN 16291-2:2013 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish

Relations

• Replaced By: EN 17829:2023 - Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
• Effective Date: 23-Jun-2021
• Corrected By: EN 16291-2:2013/AC:2014 - Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
• Effective Date: 06-Aug-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 2: Einweg-MCA 2-MundstückEmballage en verre - Bague à vis pour capsules à pression - Partie 2: Bague MCA 2 pour verre perduGlass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16291-2:2013SIST EN 16291-2:2013en,fr,de01-maj-2013SIST EN 16291-2:2013SLOVENSKI
STANDARD



SIST EN 16291-2:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16291-2
March 2013 ICS 55.100 English Version
Glass packaging - Screw finishes for pressure capsules - Part 2: One way glass MCA 2 finish
Emballage en verre - Bagues à vis pour capsules à pression - Partie 2: Bague MCA 2 pour verre perdu
Verpackungen aus Glas - Schraubmundstücke für Flaschen mit Innendruck - Teil 2: Einweg-MCA 2-Mundstück This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16291-2:2013: ESIST EN 16291-2:2013



EN 16291-2:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Terms and definitions . 5 3 Dimensions. 5 Bibliography. 10
SIST EN 16291-2:2013



EN 16291-2:2013 (E) 3 Foreword This document (EN 16291-2:2013) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 16291, Glass packaging — Screw finishes for pressure capsules, consists of the following parts:  Part 1: Returnable glass MCA 2 finish;  Part 2: One way glass MCA 2 finish. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 16291-2:2013



EN 16291-2:2013 (E) 4 Introduction This document is based on CE.T.I.E. (International Technical Centre for Bottling and related Packaging) data sheet GME 320 [1]. Efficient packaging is of great im
...