iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 17530:2022/prA1

(Amendment)

Railway applications - Interior glazing for rail vehicles

Railway applications - Interior glazing for rail vehicles

This document specifies the functional, performance, and quality requirements for the interior glazing of rail vehicles including type testing, routine testing, and inspection methods.
This document applies to all rail vehicles.
Determination of the size, shape, orientation and position of interior glazing is outside the scope of this document.
This document does not specify requirements for the interfaces between the interior glazing and the vehicle. Accordingly, this document does not address issues relating to installation and structural integrity.
This document does not apply to interior glazing with a surface less than 0,02 m2 and also emergency device casings (e.g. cover sheets for emergency hammers, passenger alarm systems, etc).
This document does not apply to materials other than glass.
For safety reasons, where the use of a specific type of glass is required, this shall be set out in the technical specification or defined in national rules.

Bahnanwendungen - Innenverglasung für Schienenfahrzeuge

Applications ferroviaires - Vitrage intérieur pour véhicules ferroviaires

Železniške naprave - Notranja zasteklitev za železniška vozila

General Information

Status
Not Published
Publication Date
25-Sep-2024
ICS
45.060.01 - Railway rolling stock in general
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 49 - Glazing
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
10-Apr-2024
Due Date
27-Oct-2024
Completion Date
10-Apr-2024
Directive
2016/797/EU - Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (Text with EEA relevance)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
M/591 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards railway products in support of Directive (EU) 2016/797
Ref Project
SIST EN 17530:2022/oprA1:2023 - Railway applications - Interior glazing for rail vehicles

Relations

Amends
EN 17530:2022 - Railway applications - Interior glazing for rail vehicles
Effective Date
07-Dec-2022

Buy Standard

EN 17530:2022/oprA1:2023EN 17530:2022/oprA1:2023
PreviousNext
Draft
EN 17530:2022/oprA1:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17530:2022/oprA1:2023
01-november-2023
Železniške naprave - Notranja zasteklitev za železniška vozila
Railway applications - Interior glazing for rail vehicles
Bahnanwendungen - Innenverglasung für Schienenfahrzeuge
Applications ferroviaires - Vitrage intérieur pour véhicules ferroviaires
Ta slovenski standard je istoveten z: EN 17530:2022/prA1
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 17530:2022/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17530:2022/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN 17530:2022/oprA1:2023


DRAFT
EUROPEAN STANDARD
EN 17530:2022
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
September 2023
ICS 45.060.01
English Version

Railway applications - Interior glazing for rail vehicles
Applications ferroviaires - Vitrage intérieur pour Bahnanwendungen - Innenverglasung für
véhicules ferroviaires Schienenfahrzeuge
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 17530:2022. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17530:2022/prA1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17530:2022/oprA1:2023
EN 17530:2022/prA1:2023 (E)
Contents
European foreword . 3
1 Modification to the scope . 4
2 Modification to Clause 2, Normative references . 4
3 Modifications to 3.13 Partition screen . 4
4 Modifications to 4.2 Laminated glass . 5
5 Modifications to Clause 5, Functional requirements . 5
6 Modifications to 6.1.2.1 General . 5
7 Modifications to 7.1.1.2 Test arrangement. 5
8 Modifications to 7.1.1.4 Acceptance criteria . 6
9 Modifications to Figure 7 . 6


2

---------------------- Page: 4 ----------------------
SIST EN 17530:2022/oprA1:2023
EN 17530:2022/prA1:2023 (E)
European foreword
This document (EN 17530:2022/prA1:2023) has been prepared by Technical Committee CEN/TC
256 “Railway applications”, the secretariat of which is held by DIN.
This document is curr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17149-2:2024(Main)
Railway applications - Strength assessment of rail vehicle structures - Part 2: Static strength assessment
SIST EN 17149-2:2024

This document specifies a procedure for static strength assessment of rail vehicle structures.
It is part of a series of standards that specifies procedures for strength assessments of structures of rail vehicles that are manufactured, operated and maintained according to standards valid for railway applications.
The assessment procedure of the series is restricted to ferrous materials and aluminium.
This document series does not define design load cases.
This document series is not applicable for corrosive conditions or elevated temperature operation in the creep range.
This series of standards is applicable to all kinds of rail vehicles. However, it does not define in which cases or for which kinds of rail vehicles a static strength assessment is to be undertaken.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14067-4:2024(Main)
Railway applications - Aerodynamics - Part 4: Requirements and assessment procedures for aerodynamics on open track
SIST EN 14067-4:2024

This document establishes requirements, test procedures, assessment methods and acceptance criteria for operating rolling stock in open track. For pressure variations and slipstream effects beside the track, requirements and assessment methods are provided. For running resistance, assessment methods are addressed in this document. Load cases on infrastructure components due to train-induced pressure variations and slipstream effects are addressed in this document. For ballasted track test set-ups for ballast projection assessment are proposed.
The requirements only apply to rolling stock of the heavy rail system with maximum train speeds above 160 km/h and not to other rail systems. The document is applicable to all rolling stock and infrastructure in open air with nominal track gauges of 1 435 mm to 1 668 mm inclusive.

  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17149-1:2024(Main)
Railway applications - Strength assessment of rail vehicle structures - Part 1: General
SIST EN 17149-1:2024

This document supports the other standards in the EN 17149 series, in order to ensure consistency of terminology across the series. It describes the basic terms and definitions as well as general procedures for strength assessments of rail vehicle structures that are manufactured, operated and maintained in accordance with standards valid for rail system applications.
This document is applicable to all kinds of rail vehicles.
The assessment procedure is restricted to ferrous materials and aluminium.
This document does not define design load cases.
This document is not applicable for corrosive conditions or elevated temperature operation in the creep range.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
SIST EN 45545-3:2024

This document specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this document, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this document. It is not within the scope of this document to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-4:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design
SIST EN 45545-4:2024

This document specifies fire safety requirements for railway vehicle design to cover the objectives specified in EN 45545-1:2013.
The measures and requirements specified in this document aim to protect passengers and staff in railway vehicles in the event of a fire on board by minimizing the risk of a fire starting, delaying the fire development and controlling the spread of fire products through the railway vehicle, thus aiding evacuation.
It is not within the scope of this document to describe measures which ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15085-2:2020+A1:2023(Main)
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer
SIST EN 15085-2:2020+A1:2024

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

  • Standard
    27 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-2:2020+A1:2023(Main)
Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
SIST EN 45545-2:2020+A1:2023

This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
The operation and design categories defined in EN 45545-1 are used to establish hazard levels that are used as the basis of a classification system.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.
It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of a fire.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17343:2023(Main)
Railway applications - General terms and definitions
SIST EN 17343:2023

This document provides terms and definitions for rail networks and rail vehicles guided by track and wheels, both made of steel and/or other materials.
This includes heavy rail and urban rail systems.
This document is applicable as a reference for future European Standards and the revision of existing standards and represents a set of general technical terms and definitions.
This document does not apply to specific applications such as:
-   track construction and maintenance machines not travelling on rails;
-   road-rail machines when not travelling on rails;
-   magnetic levitation transport networks and vehicles;
-   guided busways and guided busses;
-   non-public rail networks and vehicles, e.g. mine rail systems;
-   rail networks and vehicles exclusively for leisure, historical and tourist purposes, e.g. mountain-, field-, park-, cable rail systems, funiculars and theme park rides;
-   trolley busses.
Not in the scope are terms and definitions related to:
-   control command and signalling,
-   operation,
-   geographical aspects.

  • Standard
    76 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19659-1:2023(Main)
Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms and definitions (ISO 19659-1:2017)
SIST EN ISO 19659-1:2023

ISO 19659-1:2017 is applicable to rail vehicles and specifies the terms, definitions, symbols and abbreviated terms to be used in the ISO 19659 series, heating, ventilation and air conditioning for rolling stock.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15654-1:2018+A1:2023(Main)
Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service
SIST EN 15654-1:2018+A1:2023

The scope of this European Standard is restricted to the measurement of vertical wheel forces and calculation of derived quantities on vehicles in service. Measurements of a train in motion are used to estimate the static forces.
Derived quantities can be:
-   axle loads;
-   side to side load differences of a wheel set, bogie, vehicle;
-   overall mass of vehicle or train set;
-   mean axle load of a vehicle or train set.
This standard is not concerned with the evaluation of:
-   dynamic wheel force or derived quantities;
-   wheel condition (i.e. shape, profile, flats);
-   lateral wheel force;
-   combination of lateral and vertical wheel forces.
The standard defines accuracy classes for measurements to be made at any speed greater than 5 km/h within the calibrated range, which may be up to line speed.
The aim of this standard is to obtain measurement results that give representative values for the distribution of vertical wheel forces of a running vehicle, which under ideal conditions will be similar to those that can be obtained from a standing vehicle.
This standard does not impose any restrictions on the types of vehicles that can be monitored, or on which networks or lines the measuring system can be installed.
The standard lays down minimum technical requirements and the metrological characteristics of a system for measuring and evaluating a range of vehicle loading parameters. Also defined are accuracy classes for the parameters measured and the procedure for verifying the calibration.
The measuring system proposed in this standard should not be considered as safety critical. If the measuring system is connected to a train traffic command and control system then requirements that are not part of this standard may apply.
Measuring systems complying with this standard have the potential to enhance safety in the railway sector. However, the current operating and maintenance procedures rather than this standard are mandatory for ensuring safety levels in European rail networks.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day