EN 14532-1:2004

Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys

This document describes the basic verification tests, the testing methods, the amount of testing and the requirements for the qualification of welding consumables for steel, nickel and nickel alloys intended for all fields of application.
This document describes a wide range of tests, which are appropriate for the majority of applications. When supplementary tests are required (see EN 14532-2), these can be carried out at any time without the need to repeat the primary tests.
NOTE   Additional information is given in Annex O.

Schweißzusätze - Prüfverfahren und Qualitätsanforderungen - Teil 1: Grundprüfungen und Konformitätsbewertung von Schweißzusätzen für Stahl, Nickel und Nickellegierungen

Dieses Dokument legt die Grund-Eignungsprüfungen, die Prüfverfahren, den Prüfumfang und die Anforderungen
für die Zulassung von Schweißzusätzen für Stahl, Nickel und Nickellegierungen, die für alle Anwendungsbereiche
gelten sollen, fest.
Dieses Dokument beschreibt eine Vielzahl von Prüfungen, die für die meisten Anwendungen geeignet sind. Sind
zusätzliche Prüfungen erforderlich (siehe EN 14532-2), können sie zu jeder Zeit erfolgen, ohne die ursprüngliche
Grundprüfung wiederholen zu müssen.
ANMERKUNG Zusätzliche Informationen werden in Anhang O gegeben.

Produits consommables pour le soudage - Méthodes d'essai et exigences de qualité - Partie 1: Méthodes primaires et évaluation de la conformité des produits consommables pour l'acier, le nickel et les alliages de nickel

Le présent document décrit les essais de vérification de base, les méthodes d�essai, la quantité d�essais et les
exigences pour l�agrément des produits consommables de soudage pour l�acier, le nickel et les alliages de nickel
destinés à tous les domaines d�application.
Le présent document décrit une large gamme d�essais, qui sont appropriés à la majorité des applications. Dans le
cas où des essais complémentaires sont exigés (voir EN 14532-2), ceux-ci peuvent être réalisés à n�importe quel
moment sans qu�il soit nécessaire de répéter les essais primaires.
NOTE Des informations complémentaires sont données à l�Annexe O.

Dodajni materiali za varjenje - Preskusne metode in zahteve po kakovosti - 1. del: Glavne metode in ocenjevanje skladnosti dodajnih materialov za jeklo, nikelj in nikljeve zlitine

General Information

• Status: Published
• Publication Date: 23-Nov-2004
• Withdrawal Date: 30-May-2005
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 07-Apr-2020
• Ref Project: SIST EN 14532-1:2005 - Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dodajni materiali za varjenje - Preskusne metode in zahteve po kakovosti - 1. del: Glavne metode in ocenjevanje skladnosti dodajnih materialov za jeklo, nikelj in nikljeve zlitineSchweißzusätze - Prüfverfahren und Qualitätsanforderungen - Teil 1: Grundprüfungen und Konformitätsbewertung von Schweißzusätzen für Stahl, Nickel und NickellegierungenProduits consommables pour le soudage - Méthodes d'essai et exigences de qualité - Partie 1: Méthodes primaires et évaluation de la conformité des produits consommables pour l'acier, le nickel et les alliages de nickelWelding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys77.120.40Nikelj, krom in njune zlitineNickel, chromium and their alloys77.080.20JeklaSteels25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN 14532-1:2004SIST EN 14532-1:2005en01-marec-2005SIST EN 14532-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14532-1November 2004ICS 25.160.20English versionWelding consumables - Test methods and quality requirements -Part 1: Primary methods and conformity assessment ofconsumables for steel, nickel and nickel alloysProduits consommables pour le soudage - Méthodesd'essai et exigences de qualité - Partie 1: Méthodesprimaires et évaluation de la conformité des produitsconsommables pour l'acier, le nickel et les alliages denickelSchweißzusätze - Prüfverfahren undQualitätsanforderungen - Teil 1: Grundprüfungen undKonformitätsbewertung von Schweißzusätzen für Stahl,Nickel und NickellegierungenThis European Standard was approved by CEN on 14 October 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14532-1:2004: ESIST EN 14532-1:2005

page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.8 4 Applicable procedures for conformity assessment.9 5 Type qualification test.9 5.1 General.9 5.2 Necessary information.9 5.3 Testing of the product.10 5.3.1 Testing to demonstrate applicability.10 5.3.2 Sampling for verification of product physical characteristics.10 5.3.3 Chemical composition of the product.10 5.3.4 Marking of products.11 6 Testing.11 6.1 Testing of all-weld metal.11 6.1.1 General.11 6.1.2 Type and number of test pieces and diameters of welding consumables to be tested.11 6.1.3 Welding conditions.12 6.1.4 Testing conditions, test specimen type, number of test specimens and requirements.12 6.2 Testing of welded joints.13 6.2.1 Parent metals.13 6.2.2 Type and dimensions of the test pieces.14 6.2.3 Welding conditions.14 6.2.4 Number of test pieces.17 6.2.5 Number of test specimens.17 6.2.6 Test conditions and specimen geometry.18 6.2.7 Welded joints – Technical requirements.18 6.2.8 Post weld heat treatment.18 6.2.9 Hot cracking tests.19 7 Retests.19 8 Range of qualification.19 8.1 General.19 8.2 Parent metals.19 8.3 Post weld heat treatment.19 8.4 Combination of welding consumables and auxiliary materials.19 8.5 Welding positions.19 8.6 Current and polarity.20 8.7 Root weldability.20 8.8 Diameter range.20 8.9 Maximum temperature.20 8.10 Minimum temperature.20 8.11 Undermatching strength.20 8.12 Material thickness.20 9 Type qualification test report.20 10 Certificate.20 SIST EN 14532-1:2005

Type qualification tests – Overview.22 Annex B (normative)
Solid product composition – Limits.23 Annex C (normative)
All-weld metal from covered and tubular cored electrodes – Limits of chemical composition.24 Annex D (normative)
All-weld metal of welding consumables for steel, nickel and nickel alloys – Requirements.25 Annex E (normative)
Calculation of delta ferrite.26 Annex F (normative)
Range of qualification for steels.27 Annex G (normative)
Butt welds – Thickness limits.28 Annex H (normative)
Welded joints – Technical requirements.29 Annex I (normative)
Number of test pieces in a type qualification test.30 Annex J (informative)
Suggested qualification test report.32 Annex K (informative)
Type qualification certificate.33 Annex L (informative)
Transfer of qualification – Application.34 Annex M (informative)
Transfer of qualification – Declaration of identity.35 Annex N (normative)
Prolongation of qualification – Manufacturer's tests.36 Annex O (informative)
Qualification under the supervision of a test body.37 Annex P (informative)
List of material groups according to CR ISO 15608:2000.39 Bibliography.41
SIST EN 1453
...