EN 4700-006:2010

Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings

This European Standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of pre-production and production forgings in steel and heat resisting alloys.

Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 006: Ausfallmuster und Serienschmiedestücke

Diese Europäische Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Inspektion und
Lieferung von Ausfallmuster und Serienschmiedestücken aus Stahl und hochwarmfesten Legierungen fest.

Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 006: Pièces types et pièces de série

Cette Norme européenne définit les exigences relatives aux commandes, fabrication, essais, contrôles et livraison de produits corroyés en acier et alliages résistants à chaud.

Aeronavtika - Jeklo in zlitine, odporne proti vročini - Gneteni izdelki - Tehnična specifikacija - 006. del: Vzorci in izkovki za proizvodnjo

Ta standard določa zahteve za naročanje, proizvodnjo, preskušanje, pregledovanje in dobavo gnetenih izdelkov iz jekla in zlitin, odpornih proti vročini. Uporablja se, kadar se nanaša na standard EN za materiale in skupaj z njim, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.

General Information

• Status: Published
• Publication Date: 31-Aug-2010
• Withdrawal Date: 30-Mar-2011
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2010
• Completion Date: 01-Sep-2010
• Ref Project: SIST EN 4700-006:2011 - Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings

Relations

• Revised: prEN 4700-006 - Aerospace series - Steel and heat-resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
• Effective Date: 30-Aug-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 006: Ausfallmuster und SerienschmiedestückeSérie aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 006: Pièces types et pièces de sérieAerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings77.140.85Železni in jekleni kovani izdelkiIron and steel forgings49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4700-006:2010SIST EN 4700-006:2011en,de01-maj-2011SIST EN 4700-006:2011SLOVENSKI
STANDARD



SIST EN 4700-006:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4700-006
September 2010 ICS 49.025.10 English Version
Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings
Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 006: Pièces types et pièces de série
Luft- und Raumfahrt - Stahl und Hochwarmfesten Legierungen - Umgeformte Erzeugnisse - Technische Lieferbedingungen - Teil 006: Ausfallmuster und Serienschmiedestücke This European Standard was approved by CEN on 9 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4700-006:2010: ESIST EN 4700-006:2011



EN 4700-006:2010 (E) 2 Contents Page Foreword . 3Introduction . 41Scope . 42Normative references . 43Terms and definitions . 64Wording of order . 65Health and safety . 66Technical requirements . 66.1General . 66.2Qualification requirements . 76.3Re-qualification requirements . 76.4Release requirements . 76.5Process control testing (Procedure X) . 86.6Retests . 86.7Special tests .
...