prEN 17700-3
(Main)Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant
Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of a plant biostimulant
This document provides guidance for justifying abiotic stress tolerance claim of plant biostimulants used in agriculture.
This document is aimed primarily at manufacturers, laboratories, companies which will put the products on the market, notifying authorities, notified bodies, and market surveillance authorities.
To be in compliance with this standard, it is important also to follow the Recommendations and Quality Criteria described in the Standard of General Principles EN 17700 1:—1.
Pflanzen-Biostimulanzien - Auslobungen - Teil 3: Toleranz gegenüber abiotischem Stress infolge der Verwendung eines Pflanzen-Biostimulans
Dieses Dokument dient als Leitfaden für die Begründung von Auslobungen zur Toleranz gegenüber abiotischem Stress von Pflanzen-Biostimulanzien in der Landwirtschaft.
Dieses Dokument richtet sich in erster Linie an Hersteller, Labore, Forschungstätige, technische Zentren, Unternehmen, die die Produkte in Verkehr bringen werden, notifizierende Behörden, notifizierte Stellen und Marktüberwachungsbehörden.
Um dieser Norm zu entsprechen, ist es wichtig, auch die Empfehlungen und Qualitätskriterien, die in der Norm zu den Allgemeinen Grundsätzen EN 17700 1:—1 beschrieben sind, zu befolgen.
Biostimulants des végétaux - Allégations - Partie 3 : Tolérance au stress abiotique résultant de l'utilisation d'un biostimulant des végétaux
Le présent document fournit des recommandations pour justifier l’allégation de tolérance au stress abiotique des biostimulants des végétaux utilisés en agriculture.
Le présent document est principalement destiné aux fabricants, aux laboratoires, aux sociétés qui vont mettre les produits sur le marché, aux autorités notifiantes, aux organismes notifiés et aux autorités de surveillance du marché.
Pour être en conformité avec la présente norme, il est important de suivre aussi les recommandations et critères de qualité décrits dans la norme sur les principes généraux EN 17700 1:—1.
Rastlinski biostimulanti - Navedbe - 3. del: Toleranca na abiotični stres pri rastlinah zaradi uporabe biostimulanta
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17700-3:2023
01-maj-2023
Rastlinski biostimulanti - Navedbe - 3. del: Toleranca na abiotični stres pri
rastlinah zaradi uporabe biostimulanta
Plant biostimulants - Claims - Part 3: Tolerance to abiotic stress resulting from the use of
a plant biostimulan
Pflanzen-Biostimulanzien - Auslobungen - Teil 3: Toleranz gegenüber abiotischem
Stress infolge der Verwendung eines Pflanzen-Biostimulans
Biostimulants des végétaux - Allégations - Partie 3 : Tolérance au stress abiotique
résultant de l'utilisation d'un biostimulant des végétaux
Ta slovenski standard je istoveten z: prEN 17700-3
ICS:
65.080 Gnojila Fertilizers
oSIST prEN 17700-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17700-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN 17700-3:2023
DRAFT
EUROPEAN STANDARD
prEN 17700-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2023
ICS 65.080 Will supersede CEN/TS 17700-3:2022
English Version
Plant biostimulants - Claims - Part 3: Tolerance to abiotic
stress resulting from the use of a plant biostimulant
Biostimulants des végétaux - Allégations - Partie 3 : Pflanzen-Biostimulanzien - Auslobungen - Teil 3:
Tolérance au stress abiotique résultant de l'utilisation Toleranz gegenüber abiotischem Stress infolge der
d'un biostimulant des végétaux Verwendung eines Pflanzen-Biostimulans
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 455.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17700-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17700-3:2023
prEN 17700-3:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Terminology of the claim . 7
5 Justification of plant biostimulant claims regarding abiotic stress tolerance . 7
5.1 Introduction . 7
5.2 Trial design with negative control . 8
5.3 Trial design without negative control . 8
6 Agronomic markers to validate the claim .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.