Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes

This Part of EN 10217 specifies the technical delivery conditions in two test categories for welded tubes of circular cross-section made of austenitic and austenitic-ferritic stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.

Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 7: Rohre aus nichtrostenden Stählen

Dieser Teil der EN 10217 enthält die technischen Lieferbedingungen für geschweißte Rohre mit kreisförmigem Querschnitt aus austenitischen und aus austenitisch-ferritischen Stählen, die für Druckbeanspruchungen und für korrosive Medien bei Raumtemperatur, bei tiefen Temperaturen und bei erhöhten Temperaturen bestimmt sind, und legt dafür zwei Prüfkategorien fest.

Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 7: Tubes en aciers inoxydables

La présente partie de l'EN 10217 spécifie les conditions techniques de livraison, dans deux catégories d'essai, pour les tubes soudés à section circulaire, fabriqués en aciers inoxydables austénitiques et austénoferritiques, utilisés dans les applications nécessitant une résistance à la pression et à la corrosion à température ambiante, à basse température ou à température élevée.

Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 7. del: Cevi iz nerjavnega jekla

General Information

Status
Withdrawn
Publication Date
22-Feb-2005
Withdrawal Date
28-Oct-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Oct-2014

Relations

Buy Standard

Standard
EN 10217-7:2005
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 7: Rohre aus nichtrostenden StählenTubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 7: Tubes en aciers inoxydablesWelded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10217-7:2005SIST EN 10217-7:2005en01-maj-2005SIST EN 10217-7:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10217-7February 2005ICS 23.040.10; 77.140.75English versionWelded steel tubes for pressure purposes - Technical deliveryconditions - Part 7: Stainless steel tubesTubes soudés en acier pour service sous pression -Conditions techniques de livraison - Partie 7: Tubes enaciers inoxydablesGeschweißte Stahlrohre für DruckbeanspruchungenTechnische Lieferbedingungen - Teil 7: Rohre ausnichtrostenden StählenThis European Standard was approved by CEN on 14 October 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10217-7:2005: ESIST EN 10217-7:2005

Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC.37
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.