Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)

Zerstörungsfreie Prüfung von Stahlrohren - Teil 11: Automatisierte Ultraschallprüfung der Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten in Längs- und/oder Querrichtung - Änderung 1: Änderung der Ultraschall Prüffrequenz der Prüfköpfe; Änderung der Zulässigkeitskriterien (ISO 10893-11:2011/Amd 1:2020)

No scope available

Essais non destructifs des tubes en acier - Partie 11: Contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales - Amendement 1: Changement de la fréquence ultrasonore de l’essai; changement des critères d'acceptation (ISO 10893-11:2011/Amd 1:2020)

Neporušitveno preskušanje jeklenih cevi - 11. del: Avtomatizirano ultrazvočno preskušanje varjenega šiva varjenih jeklenih cevi za odkrivanje vzdolžnih in/ali prečnih nepopolnosti - Dopolnilo A1: Sprememba ultrazvočnih preskusnih frekvenc - sprememba meril sprejemljivosti (ISO 10893-11:2011/Amd 1:2020)

General Information

Status
Published
Publication Date
07-Jul-2020
Withdrawal Date
30-Jan-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Jul-2020
Completion Date
08-Jul-2020

Relations

Buy Standard

Amendment
EN ISO 10893-11:2011/A1:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2020
Neporušitveno preskušanje jeklenih cevi - 11. del: Avtomatizirano ultrazvočno
preskušanje varjenega šiva varjenih jeklenih cevi za odkrivanje vzdolžnih in/ali
prečnih nepopolnosti - Dopolnilo A1: Sprememba ultrazvočnih preskusnih
frekvenc - sprememba meril sprejemljivosti (ISO 10893-11:2011/Amd 1:2020)
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld
seam of welded steel tubes for the detection of longitudinal and/or transverse
imperfections - Amendment 1: Change of ultrasonic test frequency - change of
acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
Zerstörungsfreie Prüfung von Stahlrohren - Teil 11: Automatisierte Ultraschallprüfung der
Schweißnaht geschweißter Stahlrohre zum Nachweis von Unvollkommenheiten in
Längs- und/oder Querrichtung - Änderung 1: Änderung der Ultraschall Prüffrequenz der
Prüfköpfe; Änderung der Zulässigkeitskriterien (ISO 10893-11:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 11: Contrôle automatisé par ultrasons
du cordon de soudure des tubes en acier soudés pour la détection des imperfections
longitudinales et/ou transversales - Amendement 1: Changement de la fréquence
ultrasonore de l’essai; changement des critères d'acceptation (ISO 10893-11:2011/Amd
1:2020)
Ta slovenski standard je istoveten z: EN ISO 10893-11:2011/A1:2020
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
25.160.40 Varjeni spoji in vari Welded joints and welds
77.040.20 Neporušitveno preskušanje Non-destructive testing of
kovin metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10893-
EUROPEAN STANDARD
11:2011/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2020
ICS 23.040.10; 77.040.20; 77.140.75
English Version
Non-destructive testing of steel tubes - Part 11: Automated
ultrasonic testing of the weld seam of welded steel tubes
for the detection of longitudinal and/or transverse
imperfections - Amendment 1: Change of ultrasonic test
frequency; change of acceptance criteria (ISO 10893-
11:2011/Amd 1:2020)
Essais non destructifs des tubes en acier - Partie 11: Zerstörungsfreie Prüfung von Stahlrohren - Teil 11:
Contrôle automatisé par ultrasons du cordon de Automatisierte Ultraschallprüfung der Schweißnaht
soudure des tubes en acier soudés pour la détection geschweißter Stahlrohre zum Nachweis von
des imperfections longitudinales et/ou transversales - Unvollkommenheiten in Längs- und/oder
Amendement 1: Changement de la fréquence Querrichtung - Änderung 1 (ISO 10893-11:2011/Amd
ultrasonore de l'essai; changement des critères 1:2020)
d'acceptation (ISO 10893-11:2011/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 10893-11:2011; it was approved by CEN on 11 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10893-11:2011/A1:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10893-11:2011/A1:2020) has been prepared by Technical Committee ISO/TC
17 "Steel" in collaboration with Technical Committee CEN/TC 459/SC 10 “Steel tubes, and iron and
steel fittings” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 10893-11:2011 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by January
2021, and conflicting national standards shall be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, L
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.