CEN ISO/TS 14907-1:2015

Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)

ISO/TS 14907-1:2015 specifies the test procedures of EFC roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
ISO/TS 14907-1:2015 is restricted to systems operating within the radio emission, electromagnetic compatibility (EMC) regulations, traffic, and other regulations of the countries in which they are operated.
ISO/TS 14907-1:2015 identifies a set of suitable parameters and provides test procedures to enable the proof of a complete EFC system, as well as components of an EFC system, e.g. OBE, related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameters:
? functionality;
? quality;
? referenced pre-tests.
An overview of the tests and parameters provided by this part of ISO/TS 14907 is given in 5.1 and 5.2.
ISO/TS 14907-1:2015 describes procedures, methods and tools, and a test plan which shows the relation between all tests and the sequence of these tests. It lists all tests that are required to measure the performance of EFC equipment. It describes which EFC equipment is covered by the test procedures; the values of the parameters to be tested are not included. It also describes how the tests are to be performed and which tools and prerequisites are necessary before this series of tests can be undertaken. It is assumed that the security of the system is inherent in the communications and EFC functionality tests, therefore they are not addressed here. All tests in this part of ISO/TS 14907 provide instructions to evaluate the test results.

Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO/TS 14907-1:2015)

Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 1: Description des modes opératoires (ISO/TS 14907-1:2015)

Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 1. del: Opis preskuševalnih postopkov (ISO/TS 14907-1:2015)

Ta del standarda ISO/TS 14907 določa preskuševalne postopke EFC cestne opreme (RSE) in opreme v vozilu (OBE) glede skladnosti s standardi in zahtevami za homologacijo ter preskušanje sprejemljivosti, ki sodi specifično na področje aplikacije EFC.
Obseg tega dela standarda ISO/TS 14907 je omejen na sisteme, ki delujejo znotraj radijskega oddajanja,
predpisov elektromagnetne združljivosti (EMC), prometa in drugih predpisov držav, v
katerih delujejo.
Ta del standarda ISO/TS 14907 določa nabor primernih parametrov in zagotavlja preskuševalne postopke, ki dokazujejo popolnost sistema EFC, kot tudi komponente sistema EFC, npr. OBE, povezane z opredeljenimi zahtevami aplikacije. Definirani parametri in preskusi so dodeljeni naslednjim skupinam parametrov:
– funkcionalnost;
– kakovost;
– referenčni vnaprejšnji preskusi.
Pregled preskusov in parametrov, ki jih zagotavlja ta del standarda ISO/TS 14907, je naveden pod točkama 5.1 in 5.2.
Ta del standarda ISO/TS 14907 opisuje postopke, metode in orodja ter preskusni načrt, ki prikazuje razmerje med vsemi preskusi in njihovim zaporedjem. Našteva vse preskuse, ki so potrebni za merjenje zmogljivosti opreme EFC. Opisuje, katera oprema EFC je zajeta v preskusnih postopkih; vrednosti parametrov za preskušanje niso vključene. Prav tako opisuje, kako in s katerimi orodji je treba opraviti preskuse ter kateri predpogoji morajo biti izpolnjeni pred začetkom preskušanja. Predpostavlja se, da je varnost sistema neločljivo povezana s komunikacijo in preskusi funkcionalnosti EFC, zato tukaj ni obravnavana. Vsi preskusi v tem delu standarda ISO/TS 14907 vsebujejo navodila za ovrednotenje rezultatov preskušanja.
Preskusni postopki se lahko uporabljajo za preskušanje prototipa, homologacije, namestitev in za redne preglede. Ta del standarda ISO/TS 14907 tako določa le preskus in preskuševalne postopke, ne pa tudi primerjalnih številk, s katerimi jih je treba meriti.
Ta del standarda ISO/TS 14907, ki je povezan s konceptualnim modelom sistema EFC, se nanaša samo na opremo uporabnika in ponudnika storitev, kot je prikazano na sliki 1. Druge entitete ne spadajo na področje uporabe tega dela standarda ISO/TS 14907.
Sisteme EFC za DSRC načeloma sestavljajo skupine tehničnih komponent, ki v kombinaciji izpolnjujejo funkcije, potrebne za avtomatsko elektronsko pobiranje pristojbin. Te komponente zajemajo vse ali večino naslednjih postavk:
– OBE v vozilu;
– OBE, ki vsebuje komunikacijske in računalniške podfunkcije;
– neobvezna kartica z integriranim vezjem, ki lahko nosi elektronski denar, pravice storitev in druge
zaščitene informacije;
– komunikacija med OBE in RSE na podlagi DSRC;
– oprema za pobiranje pristojbin na RSE, ki vsebuje komunikacijske in računalniške podfunkcije;
– oprema za izvrševanje na cesti;
– osrednja oprema za upravljanje in delovanje sistema.
Obseg uporabe tega dela standarda ISO/TS 14907 se nanaša samo na OBE in RSE ter vmesnik DSRC med OBE in RSE vključno z njegovimi funkcijami za pobiranje pristojbin, kot je prikazano na sliki 2. Vsa oprema, ki se uporablja za izvrševanje (npr. zaznavanje, razvrščanje, lokalizacija in registracija), in osrednja oprema, ne sodi na področje uporabe tega dela standarda ISO/TS 14907.

General Information

• Status: Withdrawn
• Publication Date: 22-Sep-2015
• Withdrawal Date: 30-Jun-2020
• ICS: 35.240.60 - IT applications in transport
• ICS: 43.040.15 - Car informatics. On board computer systems
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 1 - Electronic fee collection and access control (EFC)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Jul-2020
• Mandate: M/018 - Standardization Mandate forwarded to CEN/CENELEC/ETSI in the field of Information Technology and Telecommunications concerning Road Transport and Traffic Telematics
• Ref Project: SIST-TS CEN ISO/TS 14907-1:2015 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015)

Relations

• Replaces: CEN ISO/TS 14907-1:2010/AC:2010 - Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010/Cor 1:2010)
• Effective Date: 30-Sep-2015
• Replaces: CEN ISO/TS 14907-1:2010 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2010)
• Effective Date: 16-Nov-2014
• Replaced By: EN ISO 14907-1:2020 - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO 14907-1:2020)
• Effective Date: 08-Jul-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2015
1DGRPHãþD
SIST-TS CEN ISO/TS 14907-1:2010
SIST-TS CEN ISO/TS 14907-1:2010/AC:2013
Elektronsko pobiranje pristojbin - Postopki za preskušanje opreme - 1. del: Opis
preskuševalnih postopkov (ISO/TS 14907-1:2015)
Electronic fee collection - Test procedures for user and fixed equipment - Part 1:
Description of test procedures (ISO/TS 14907-1:2015)
Elektronische Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige
Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO/TS 14907-1:2015)
Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux
équipements fixes - Partie 1: Description des modes opératoires (ISO/TS 14907-1:2015)
Ta slovenski standard je istoveten z: CEN ISO/TS 14907-1:2015
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
43.040.15 $YWRPRELOVNDLQIRUPDWLND Car informatics. On board
9JUDMHQLUDþXQDOQLãNLVLVWHPL computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 14907-1
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
September 2015
TECHNISCHE SPEZIFIKATION
ICS 43.040.15; 35.240.60 Supersedes CEN ISO/TS 14907-1:2010
English Version
Electronic fee collection - Test procedures for user and
fixed equipment - Part 1: Description of test procedures
(ISO/TS 14907-1:2015)
Perception du télépéage - Modes opératoires relatifs Elektronische Gebührenerhebung - Testverfahren für
aux équipements embarqués et aux équipements fixes - straßenseitige und fahrzeugseitige Einrichtungen - Teil
Partie 1: Description des modes opératoires (ISO/TS 1: Beschreibung von Testverfahren (ISO/TS 14907-
14907-1:2015) 1:2015)
This Technical Specification (CEN/TS) was approved by CEN on 10 August 2015 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14907-1:2015 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TS 14907-1:2015) has been prepared by Technical Committee
ISO/TC 204 “Intelligent transport systems” in collaboration with Technical Committee
CEN/TC 278 “Intelligent transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN ISO/TS 14907-1:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 14907-1:2015 has been approved by CEN as CEN ISO/TS 14907-1:2015 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 14907-1
Third edition
2015-09-01
Electronic fee collection — Test
procedures for user and fixed
equipment —
Part 1:
Description of test procedures
Perception du télépéage — Modes opératoires relatifs aux
équipements embarqués et aux équipements fixes —
Partie 1: Description des modes opératoires
Reference number
ISO/TS 14907-1:2015(E)
©
ISO 2015
ISO/TS 14907-1:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

ISO/TS 14907-1:2015(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 3
3 Terms and definitions . 3
4 Abbreviated terms . 6
5 Test parameters and test procedures for EFC . 7
5.1 Tests overview . 7
5.1.1 General. 7
5.1.2 Functionality tests . 7
5.1.3 Quality tests . 8
5.1.4 Referenced pre-tests . 8
5.2 Parameter overview . 8
5.3 Test plan .15
5.4 Required documentation .15
6 Inspection and tests .16
6.1 Functionality tests .16
6.1.1 Communication .16
6.1.2 EFC application .16
6.1.3 Traffic conditions . .21
6.1.4 Vehicle characteristics.22
6.1.5 Environmental influences .24
6.2 Quality tests .25
6.2.1 Quality management .25
6.2.2 Reliability and availability .26
6.3 Referenced pre-tests .26
6.3.1 DSRC .26
6.3.2 Environment .27
6.3.3 EMC.27
7 Evaluation and certification .27
7.1 Evaluation .27
7.2 Certification .27
Annex A (informative) How to use this Technical Specification .29
Annex B (informative) Traffic, vehicle, and other performance tests .31
Annex C (informative) Reliability/availability tests .52
Annex D (informative) Classes of equipment .58
Annex E (informative) Examples for statistical calculations .60
Annex F (informative) Examples of referenced pre-tests based on European test procedures .64
Annex G (informative) Test methods and tools .69
Annex H (informative) Examples of EFC scenarios .77
Annex I (informative) Examples of referenced pre-tests based on Japanese test procedures .85
Bibliography .88
ISO/TS 14907-1:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies).
...