EN 13480-3:2012/A1:2017

Metallic industrial piping - Part3: Design and calculation

1.1 The purpose of EN 13480 is to define the requirements for design, manufacture, installation, testing and inspection of industrial piping systems and supports, including safety systems, made of metallic materials (but initially restricted to steel) with a view to ensure safe operation. 1.2 EN 13480 is applicable to metallic piping above ground, ducted or buried, independent of pressure.

Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung

1.1 Zweck dieser EN 13480 ist die Festlegung von Anforderungen an Konstruktion, Herstellung, Verlegung und Prüfung industrieller Rohrleitungen einschließlich Sicherheitseinrichtungen, aus metallenen Werkstoffen (aber zunächst auf Stähle beschränkt), für sichere Betriebsbedingungen. 1.2 Die vorliegende Norm gilt für oberirdische oder in Kanäle verlegte oder erdgedeckte Rohrleitungen aus metallenen Werkstoffen unabhängig vom Druck.

Tuyauteries industrielles métalliques - Partie 3 : Conception et calcul

1.1 L'objectif de EN 13480 est de définir les exigences relatives à la conception, la fabrication, l'installation, le contrôle et l'inspection des réseaux de tuyauteries industrielles, y compris des systèmes de sécurité, réalisés à partir de matériaux métalliques (mais pour l'instant limité aux aciers), dans le but de garantir la sécurité lors de leur utilisation. 1.2 EN 13480 est applicable aux tuyauteries métalliques aériennes, en caniveau ou enterrées, indépendamment de la pression.

Kovinski industrijski cevovodi - 3. del: Konstruiranje in izračun - Dopolnilo A1

General Information

• Status: Withdrawn
• Publication Date: 06-Jun-2017
• Withdrawal Date: 27-Jun-2017
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 3 - Design and calculation
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jun-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-3:2012/A1:2018 - Metallic industrial piping - Part 3: Design and calculation

Relations

• Replaced By: EN 13480-3:2017 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 05-Jul-2017
• Amends: EN 13480-3:2012 - Metallic industrial piping - Part 3: Design and calculation
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2018
.RYLQVNLLQGXVWULMVNLFHYRYRGLGHO.RQVWUXLUDQMHLQL]UDþXQ'RSROQLOR$
Metallic industrial piping - Part 3: Design and calculation
Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung
Tuyauteries industrielles métalliques - Partie 3 : Conception et calcul
Ta slovenski standard je istoveten z: EN 13480-3:2012/A1:2017
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13480-3:2012/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2017
EUROPÄISCHE NORM
ICS 23.040.01
English Version
Metallic industrial piping - Part3: Design and calculation
Tuyauteries industrielles métalliques - Partie 3 : Metallische industrielle Rohrleitungen - Teil 3:
Conception et calcul Konstruktion und Berechnung
This amendment A1 modifies the European Standard EN 13480-3:2012; it was approved by CEN on 21 May 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-3:2012/A1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Modifications to Clause 2. 5
2 Modification to Clause 3. 5
3 Modification to 4.1 . 5
4 Modification to 4.2.3.4 . 5
5 Modification to 4.3 . 6
6 Modification to 4.6 . 8
7 Modification to 5.2.2 . 8
8 Modification to 5.2.2.2 . 8
9 Modification to 5.2.5.1 . 8
10 Modification to 5.3.1 . 9
11 Modification to 5.3.2.1 . 9
12 Modification to 6.2.3.2 . 10
13 Modification to 6.3.1 . 10
14 Modification to 6.3.2 . 10
15 Modification to 6.4.1 . 11
16 Modification to 6.4.4 . 11
17 Modification to 6.4.6.2 . 12
18 Modification to 6.4.6.3 . 12
19 Modification to 6.4.7.3 . 13
20 Modification to 6.4.8.3 . 13
21 Modification to 6.6.1 . 13
22 Modification to 6.6.2 . 13
23 Modification to 6.6.3 . 13
24 Modification to 6.6.4 . 14
25 Modification to 7.1.2 . 14
26 Modification to 7.2.3.2 . 14
27 Modification to 7.2.3.3 . 15
28 Modification to 7.2.3.4 . 16
29 Modification to 7.2.4.3 . 16
30 Modification to 7.2.5.2 . 19
31 Modification to 8.3.1 . 19
32 Modification to 8.3.2 . 19
33 Modification to 8.3.9 . 19
34 Modification to 8.4.4 . 20
35 Modification to 8.6.1 . 20
36 Modification to 8.6.3 . 21
37 Modification to 10.2 . 21
38 Modification to 10.3.1 . 21
39 Modification to 10.3.2.2 . 21
40 Modification to 10.3.2.3 . 21
41 Modification to 10.5 . 22
42 Modification to 12.1.3.2 . 22
43 Modification to 12.2.2 . 22
44 Modification to 12.2.10.3 . 22
45 Modification to 12.3.1 . 22
46 Modification to 12.3.2 . 22
47 Modification to 12.3.4 . 23
48 Modification to 12.3.6 . 23
49 Modification to 12.3.8 . 23
50 Modification to Clause 13 . 23
51 Modification to Annex C . 43
52 Modification to Annex D . 43
53 Modification to Annex E . 43
54 Modification to Annex I . 43
55 Modification to K.1 . 48
56 Modification to Annex N . 48
57 Modification to Annex P . 49
58 Modification to Annex ZA . 49
59 Modification to Bibliography. 49
European foreword
This document (EN 13480-3:2012/A1:2017) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2017, and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of EN 13480-
3:2012.
This document includes the text of the amendment itself. The amended/corrected pages of EN 13480-
3:2012 will be published in the new Edition 2017 of the European Standard.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Modifications to Clause 2
Update the list of normative references as follows:
Replace reference EN 1591-1:2001+A1:2009+AC:2011 by EN 1591-1:2013, Flanges and their joints —
Design rules for gasketed circular flange connections — Part 1: Calculation
Add reference EN 10216-2:2013, Seamless steel tubes for pressure purposes — Technical delivery
conditions — Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Delete reference EN 287-1:2004+A2:2006, Qualification test of welders — Fusion
...

SLOVENSKI STANDARD
SIST EN 13480-3:2012/oprA1:2016
01-september-2016
.RYLQVNLLQGXVWULMVNLFHYRYRGLGHO.RQVWUXLUDQMHLQL]UDþXQ'RSROQLOR$
Metallic industrial piping - Part 3: Design and calculation
Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung
Tuyauteries industrielles métalliques - Partie 3 : Conception et calcul
Ta slovenski standard je istoveten z: EN 13480-3:2012/prA1
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-3:2012/oprA1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 13480-3:2012/oprA1:2016

SIST EN 13480-3:2012/oprA1:2016

DRAFT
EUROPEAN STANDARD
EN 13480-3:2012
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
July 2016
ICS 23.040.01
English Version
Metallic industrial piping - Part3: Design and calculation
Tuyauteries industrielles métalliques - Partie 3 : Metallische industrielle Rohrleitungen - Teil 3:
Conception et calcul Konstruktion und Berechnung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A1, if approved, will modify the European Standard EN 13480-3:2012. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-3:2012/prA1:2016 E
worldwide for CEN national Members.

SIST EN 13480-3:2012/oprA1:2016
EN 13480-3:2012/prA1:2016 (E)
Contents Page
European foreword . 4
1 Modifications to Clause 2. 5
2 Modification to Clause 3. 5
3 Modification to 4.1 . 5
4 Modification to 4.2.3.4 . 5
5 Modification to 4.3 . 6
6 Modification to 4.6 . 8
7 Modification to 5.2.2 . 8
8 Modification to 5.2.2.2 . 8
9 Modification to 5.2.5.1 . 8
10 Modification to 5.3.1 . 9
11 Modification to 5.3.2.1 . 9
12 Modification to 6.2.3.2 . 10
13 Modification to 6.3.1 . 10
14 Modification to 6.3.2 . 11
15 Modification to 6.4.1 . 11
16 Modification to 6.4.4 . 11
17 Modification to 6.4.6.2 . 12
18 Modification to 6.4.6.3 . 13
19 Modification to 6.4.7.3 . 13
20 Modification to 6.4.8.3 . 13
21 Modification to 6.6.1 . 13
22 Modification to 6.6.2 . 13
23 Modification to 6.6.3 . 14
24 Modification to 6.6.4 . 14
25 Modification to 7.1.2 . 14
26 Modification to 7.2.3.2 . 15
27 Modification to 7.2.3.3 . 15
28 Modification to 7.2.4.3 . 16
29 Modification to 7.2.5.2 . 19
30 Modification to 8.3.1 . 19
31 Modification to 8.3.2 . 19
SIST EN 13480-3:2012/oprA1:2016
EN 13480-3:2012/prA1:2016 (E)
32 Modification to 8.3.9 . 19
33 Modification to 8.4.4 . 20
34 Modification to 8.6.1 . 20
35 Modification to 8.6.3 . 21
36 Modification to 10.2 . 21
37 Modification to 10.3.1 . 21
38 Modification to 10.3.2.2 . 21
39 Modification to 10.3.2.3 . 21
40 Modification to 10.5 . 22
41 Modification to 12.1.3.2 . 22
42 Modification to 12.2.2 . 22
43 Modification to 12.2.10.3 . 22
44 Modification to 12.3.1 . 22
45 Modification to 12.3.2 . 23
46 Modification to 12.3.4 . 23
47 Modification to 12.3.6 . 23
48 Modification to 12.3.8 . 23
49 Modification to Clause 13 . 24
13 Pipe Supports . 24
50 Modification to Annex C . 44
51 Modification to Annex D . 44
52 Modification to Annex E . 44
53 Modification to Clause I.3 . 44
54 Modification to Clause K.1 . 49
55 Modification to Annex N . 49
56 Modification to Annex P . 51
57 Modification to Annex ZA . 51
58 Modification to Bibliography. 51

SIST EN 13480-3:2012/oprA1:2016
EN 13480-3:2012/prA1:2016 (E)
European foreword
This document (EN 13480-3:2012/prA1:2016) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of EN 13480-
3:2012.
This document includes the text of the amendment itself. The amended/corrected pages of
EN 13480-3:2012 will be published in the new Edition 2017 of the European Standard.
SIST EN 13480-3:2012/oprA1:2016
EN 13480-3:2012/prA1:2016 (E)
1 Modifications to Clause 2
The list of normative references shall be updated as follows:
Replace reference EN 1591-1:2001+A1:2009+AC:2011 by EN 1591-1:2013, Flanges and their joints —
Design rules for gasketed circular flange connections — Part 1: Calculation
Add reference EN 10216-2:2013, Seamless steel tubes for pressure purposes — Technical delivery
conditions — Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Delete reference EN 12953-3:2002, Shell boilers — Part 3: Design and calculation for pressure parts
2 Modification to Clause 3
In Table 3.2-1, add the following definition at the top of the table:
Symbol Description Unit
P maximum pressure obtained from the design by formulae or relevant MPa (N/mm²)
max
procedures for a given component
3 Modification to 4.1
As the last paragraph of 4.1, add the new following text:
Piping for fluids which are likely to cause condensation shall be installed with adequate slopes and
traps.
4 Modification to 4.2.3.4
The sub-clause 4.2.3.4 shall read as f
...