EN ISO 18097:2022

Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature (ISO 18097:2022)

This document specifies the equipment and procedures for determining the maximum service temperature of flat insulation products. It is applicable to thermal insulating products.

Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung der oberen Anwendungsgrenztemperatur (ISO 18097:2022)

Dieses Dokument legt Prüfeinrichtungen und Verfahren zur Bestimmung von der oberen Anwendungsgrenz¬temperatur von ebenen Dämmprodukten fest. Es gilt für Wärmedämmprodukte.

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination de la température maximale de service (ISO 18097:2022)

Le présent document spécifie l’équipement et les modes opératoires servant à déterminer la température maximale de service des produits isolants plats. Elle s’applique aux produits isolants thermiques.

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Ugotavljanje najvišje temperature uporabe (ISO 18097:2022)

Ta evropski standard določa opremo in postopke za ugotavljanje najvišje temperature uporabe ploščatih izolacijskih proizvodov. Uporablja se za toplotnoizolacijske proizvode.

General Information

• Status: Published
• Publication Date: 06-Sep-2022
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 10 - Building equipment and industrial installations
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Sep-2022
• Due Date: 08-Dec-2020
• Completion Date: 07-Sep-2022
• Ref Project: SIST EN ISO 18097:2022 - Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature (ISO 18097:2022)

Relations

• Replaces: EN 14706:2012 - Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
• Effective Date: 14-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 18097:2022
01-november-2022
Nadomešča:
SIST EN 14706:2013
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Ugotavljanje najvišje temperature uporabe (ISO 18097:2022)
Thermal insulating products for building equipment and industrial installations -
Determination of maximum service temperature (ISO 18097:2022)
Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen -
Bestimmung der oberen Anwendungsgrenztemperatur (ISO 18097:2022)
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Détermination de la température maximale de service (ISO 18097:2022)
Ta slovenski standard je istoveten z: EN ISO 18097:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 18097:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 18097:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 18097:2022


EN ISO 18097
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 14706:2012
English Version

Thermal insulating products for building equipment and
industrial installations - Determination of maximum
service temperature (ISO 18097:2022)
Produits isolants thermiques pour l'équipement du Wärmedämmstoffe für die Haustechnik und für
bâtiment et les installations industrielles - betriebstechnische Anlagen - Bestimmung der oberen
Détermination de la température maximale de service Anwendungsgrenztemperatur (ISO 18097:2022)
(ISO 18097:2022)
This European Standard was approved by CEN on 6 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18097:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 18097:2022
EN ISO 18097:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 18097:2022
EN ISO 18097:2022 (E)
European foreword
This document (EN ISO 18097:2022) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14706:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
...