EN ISO 12623:2022

Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation (ISO 12623:2022)

This document specifies the equipment and procedures for determining the short-term water absorption of preformed pipe insulation by partial immersion in water. It is applicable to thermal insulating products.
NOTE      It is intended to simulate the water absorption caused by exposure to rain for 24 h during product installation.
This document has been prepared for products used to insulate building equipment and industrial installations, but it can also be applied to products used in other areas.

Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung der Wasseraufnahme bei kurzzeitigem teilweisem Eintauchen von vorgeformten Rohrdämmstoffen (ISO 12623:2022)

Dieses Dokument legt Prüfeinrichtungen und Verfahren zur Bestimmung der Wasseraufnahme bei kurz¬zeitigem teilweisem Eintauchen von vorgeformten Rohrdämmstoffen fest. Es gilt für Wärmedämmprodukte.
ANMERKUNG   Es kann die Wasseraufnahme simuliert werden, die bei einer 24-stündigen Regenperiode während des Einbauens der Produkte auftritt.
Dieses Dokument wurde für Produkte erarbeitet, die zum Dämmen von haustechnischen und betriebs-technischen Anlagen eingesetzt werden; es kann aber auch auf Produkte für andere Anwendungsbereiche angewendet werden.

Produits isolants thermiques pour les équipements de bâtiments et les installations industrielles - Détermination de l'absorption d'eau à court terme par immersion partielle des coquilles isolantes préformées (ISO 12623:2022)

Le présent document spécifie l’équipement et les modes opératoires à suivre pour déterminer l’absorption d’eau à court terme par immersion partielle de coquilles isolantes préformées. Il s’applique aux produits isolants thermiques.
NOTE         Il est destiné à simuler l’absorption d’eau causée par l’exposition à la pluie pendant 24 h, lors de la mise en œuvre du produit.
Le présent document a été élaboré pour les produits utilisés pour l’isolation des équipements des bâtiments et des installations industrielles, mais il peut aussi être appliqué à des produits utilisés dans d’autres domaines.

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Ugotavljanje vpojnosti vode predoblikovanih cevnih izolacij z delno kratkotrajno potopitvijo (ISO 12623:2022)

Ta evropski standard določa opremo in postopke za ugotavljanje vpojnosti vode predoblikovanih cevnih izolacij z delno kratkotrajno potopitvijo v vodo. Uporablja se za toplotnoizolacijske proizvode.
OPOMBA:   Namenjen je simulaciji vpijanja vode pri 24-urni izpostavljenosti dežju med nameščanjem proizvoda.
Če je cevna izolacija izrezana iz ploščatega proizvoda, je mogoče vpojnost vode z delno kratkotrajno potopitvijo pridobiti s preskusi, izvedenimi na ploščatem proizvodu s podobnimi lastnostmi v skladu s standardom EN 1609, pri čemer se preskus izvede v smeri, ki zagotavlja največje vpijanje vode.

General Information

• Status: Published
• Publication Date: 06-Sep-2022
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 10 - Building equipment and industrial installations
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 07-Sep-2022
• Due Date: 08-Dec-2021
• Completion Date: 07-Sep-2022
• Ref Project: SIST EN ISO 12623:2022 - Thermal insulating products for building equipment and industrial installations - Determination of short-term water absorption by partial immersion of preformed pipe insulation (ISO 12623:2022)

Relations

• Replaces: EN 13472:2012 - Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation
• Effective Date: 14-Sep-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12623:2022
01-november-2022
Nadomešča:
SIST EN 13472:2013
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Ugotavljanje vpojnosti vode predoblikovanih cevnih izolacij z delno kratkotrajno
potopitvijo (ISO 12623:2022)
Thermal insulating products for building equipment and industrial installations -
Determination of short-term water absorption by partial immersion of preformed pipe
insulation (ISO 12623:2022)
Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen -
Bestimmung der Wasseraufnahme bei kurzzeitigem teilweisem Eintauchen von
vorgeformten Rohrdämmstoffen (ISO 12623:2022)
Produits isolants thermiques pour les équipements des bâtiments et les installations
industrielles - Détermination de l'absorption d'eau à court terme par immersion partielle
des coquilles isolantes préformées (ISO 12623:2022)
Ta slovenski standard je istoveten z: EN ISO 12623:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
SIST EN ISO 12623:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12623:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 12623:2022


EN ISO 12623
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 13472:2012
English Version

Thermal insulating products for building equipment and
industrial installations - Determination of short-term
water absorption by partial immersion of preformed pipe
insulation (ISO 12623:2022)
Produits isolants thermiques pour les équipements de Wärmedämmstoffe für die Haustechnik und für
bâtiments et les installations industrielles - betriebstechnische Anlagen - Bestimmung der
Détermination de l'absorption d'eau à court terme par Wasseraufnahme bei kurzzeitigem teilweisem
immersion partielle des coquilles isolantes préformées Eintauchen von vorgeformten Rohrdämmstoffen (ISO
(ISO 12623:2022) 12623:2022)
This European Standard was approved by CEN on 7 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12623:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 12623:2022
EN ISO 12623:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 12623:2022
EN ISO 12623:2022 (E)
European foreword
This document (EN ISO 12623:2022) has been prepared by Technical Committee ISO/TC 163/SC 1
"Test and measurement methods" in collaboration with Technical Committee CEN/TC 88 “Thermal
insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13472:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-C
...