CEN/TS 15149-3:2006

Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method

This Technical Specification specifies a method for the determination of the size distribution of particulate biofuels by the rotary screen method. The method described is meant for particulate biofuels only, namely materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form e.g. olive stones, nutshells, grain etc. This document applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and over, e.g. wood chips, hog fuel, olive stones etc.

Feste Biobrennstoffe - Verfahren zur Bestimmung der Teilchengrößenverteilung - Teil 3: Verfahren mit rotierendem Sieb

Biocombustibles solides - Méthode de détermination de la distribution granulométrique - Partie 3 : Méthode au tamis rotatif

Trdna biogoriva – Metode določanja porazdelitve velikosti delcev – 3. del: Rotacijska zaslonska metoda

General Information

• Status: Withdrawn
• Publication Date: 24-Jan-2006
• Withdrawal Date: 25-Nov-2014
• ICS: 75.160.10 - Solid fuels
• ICS: 75.160.40 - Biofuels
• Technical Committee: CEN/TC 335 - Solid biofuels
• Drafting Committee: CEN/TC 335/WG 4 - Physical and Mechanical Test Methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Nov-2014
• Mandate: M/298 - Mandate to CEN for standardisation in the field of solid biofuels
• Ref Project: SIST-TS CEN/TS 15149-3:2006 - Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method

Relations

• Replaced By: CEN/TR 15149-3:2014 - Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method
• Effective Date: 07-Nov-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15149-3:2006
01-april-2006
7UGQDELRJRULYD±0HWRGHGRORþDQMDSRUD]GHOLWYHYHOLNRVWLGHOFHY±GHO
5RWDFLMVND]DVORQVNDPHWRGD
Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary
screen method
Feste Biobrennstoffe - Verfahren zur Bestimmung der Teilchengrößenverteilung - Teil 3:
Verfahren mit rotierendem Sieb
Biocombustibles solides - Méthode de détermination de la distribution granulométrique -
Partie 3 : Méthode au tamis rotatif
Ta slovenski standard je istoveten z: CEN/TS 15149-3:2006
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15149-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15149-3:2006

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15149-3:2006
TECHNICAL SPECIFICATION
CEN/TS 15149-3
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
January 2006
ICS 75.160.10

English Version
Solid biofuels - Methods for the determination of particle size
distribution - Part 3: Rotary screen method
Combustibles solides - Méthode de détermination de la Feste Biobrennstoffe - Verfahren zur Bestimmung der
granularité - Partie 3 : Méthode au tamis rotatif Teilchengrößenverteilung - Teil 3: Verfahren mit
rotierendem Sieb
This Technical Specification (CEN/TS) was approved by CEN on 4 June 2005 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15149-3:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15149-3:2006
CEN/TS 15149-3:2006 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Principle.6
5 Apparatus .6
6 Sample preparation.7
7 Procedure .7
8 Calculation.8
9 Precision and bias .10
10 Test report .10
Annex A .11

Bibliography.
...