EN 13471:2001

Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion

This European Standard specifies the equipment and procedures for determining the coefficient of linear thermal expansion. The standard is applicable to thermal insulating products within the tem-perature range - 196 °C to 850 °C, subject to the possible tempera-ture limita-tion of the test speci-mens. It shall not be used for products which during the test experien-ce dimensional changes due to the loss of hydration water or which undergo other phase changes.
NOTE   Because of its small dimensions the test specimen should be care-fully selected to be representative of the product being tested.

Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung des Wärmeausdehnungskoeffizienten

Anwendungsbereich
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung des linearen Wärmeausdeh-nungs-koeffizienten fest. Sie ist für Wärmedämmstoffe inner-halb eines Temperaturbereiches von - 196 °C bis 850 °C anwendbar, was aber von der möglichen Temperaturbegrenzung für die Probekörper abhängt. Die Norm darf nicht für Produkte angewendet werden, die während der Prüfung aufgrund des Verlustes von Hydratwasser Maßände-rungen erfahren oder die anderen Gefügever-änderungen unterliegen.
ANMERKUNG  Wegen ihrer kleinen Maße sollten die Probekörper sorgfältig ausge-wählt werden, damit sie re-präsentativ für das zu prüfende Produkt sind.

Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination du coefficient de dilatation thermique

La présente Norme européenne spécifie les équipements nécessaires et les procédures à suivre pour déterminer le coefficient de dilatation thermique linéaire. Elle s'applique aux produits isolants thermiques utilisés dans une gamme de températures allant de -196° à 850° mais elle est sujette à une éventuelle limitation de température imposée par les éprouvettes d'essai. Elle ne peut pas être utilisée dans le cas de produits subissant au cours de l'essai des variations dimensionnelles dues à une perte en eau ou subissant d'autres changements de phase.
NOTE   Vu les faibles dimensions de l'éprouvette d'essai, il convient que celle-ci soit choisie soigneusement pour être représentative du produit testé.

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije – Ugotavljanje koeficienta temperaturne razteznosti

General Information

• Status: Withdrawn
• Publication Date: 18-Sep-2001
• Withdrawal Date: 06-Sep-2022
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 10 - Building equipment and industrial installations
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Sep-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: SIST EN 13471:2002 - Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion

Relations

• Replaced By: EN ISO 18099:2022 - Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion (ISO 18099:2022)
• Effective Date: 22-Jul-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije – Ugotavljanje koeficienta temperaturne razteznostiWärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen - Bestimmung des WärmeausdehnungskoeffizientenProduits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Détermination du coefficient de dilatation thermiqueThermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13471:2001SIST EN 13471:2002en01-marec-2002SIST EN 13471:2002SLOVENSKI
STANDARD



SIST EN 13471:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13471September 2001ICS 91.100.60English versionThermal insulating products for building equipment and industrialinstallations - Determination of the coefficient of thermalexpansionProduits isolants thermiques pour l'équipement du bâtimentet les installations industrielles - Détermination ducoefficient de dilatation thermiqueWärmedämmstoffe für die Haustechnik und fürbetriebstechnische Anlagen - Bestimmung desWärmeausdehnungskoeffizientenThis European Standard was approved by CEN on 18 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13471:2001 ESIST EN 13471:2002



EN 13471:2001 (E)2ContentspageForeword.31
Scope.42
Normative references.43
Terms and definitions.44
Principle.55
Apparatus.56
Test specimens.77
Procedure.88
Calculation and expression of results.99
Accuracy of measurement.910
Test report.9SIST EN 13471:2002



EN 13471:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 88 "Thermal insulatingmaterials and products", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endorsement, at the latest by March 2002, and conflicting national standards shall bewithdrawn at the latest by March 2002.This European Standard is one of a series of standards which specify test methods for determiningdimensions and properties of thermal insulating materials and products. It supports a series of productstandards for thermal insulating materials and products which derive from the Council Directive of 21December 1988 o
...