iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12094-6:2000

(Main)

Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems

Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems

This European Standard specifies requirements and test methods for non-electrical disable devices that prevent during maintenance work in the protected room or object any kind of unintentional release (automatic or manual) of CO 2 installations or in multiple-zone systems of each individual flooding zone without disabling the fire detection and alarm functions. NOTE This standard can be used as guidance for testing electrical disable devices which work on different principles.

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 6: Anforderungen und Prüfverfahren für nichtelektrische Blockiereinrichtungen für CO2-Anlagen

Diese Europäische Norm legt Anforderungen und Prüfverfahren für nichtelektrische Blockiereinrichtungen fest, die während Wartungsarbeiten im geschützten Raum oder Objekt jede Art von unbeabsichtigter Auslösung (automatisch oder manuell) von CO 2 -Anlagen oder bei Mehrbereichsanlagen jedes einzelnen Flutungsbereiches verhindern, ohne die Brandmeldung und die Alarmfunktionen zu beeinträchtigen. ANMERKUNG Diese Norm kann für die Prüfung von elektrischen Blockiereinrichtungen, die nach anderen
Prinzipien arbeiten, als Anleitung verwendet werden.

Installations fixes de lutte contre l'incendie - Eléments constitutifs des installations d'extinction à gaz - Partie 6: Exigences et méthodes d'essai pour dispositifs non électriques de mise hors service pour systèmes à CO2

La présente Norme européenne spécifie les exigences et méthodes d¿essai applicables aux dispositifs non électriques de mise hors service qui, pendant les travaux de maintenance effectués dans le local ou sur l¿objet protégé, préviennent tout risque de déclenchement intempestif (automatique ou manuel) des installations d¿extinction à CO2 ou, dans le cas des systèmes à zones multiples, tout risque de déclenchement sur une zone individuelle de noyage sans, pour autant, désactiver les fonctions de détection et d¿alarme incendie. NOTE Il convient d¿utiliser la présente norme uniquement comme guide pour l¿essai des dispositifs non électriques de mise hors service ayant des principes de fonctionnement différents.

Vgrajeni gasilni sistemi - Sestavni deli sistemov za gašenje s plinom - 6. del: Zahteve in preskusne metode za neelektrične naprave za zaustavitev pri sistemih s CO2

General Information

Status
Withdrawn
Publication Date
12-Dec-2000
Withdrawal Date
25-Apr-2006
ICS
13.220.10 - Fire-fighting
13.220.20 - Fire protection
Technical Committee
CEN/TC 191 - Fixed firefighting systems
Drafting Committee
CEN/TC 191/WG 6 - Gas extinguishing Systems and components
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
26-Apr-2006
Completion Date
26-Apr-2006
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/109 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on fire alarm/detection, fixed firefighting, fire and smoke control and explosion suppression products
Ref Project
SIST EN 12094-6:2001 - Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices for CO2 systems

Relations

Replaced By
EN 12094-6:2006 - Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices
Effective Date
22-Dec-2008

Buy Standard

EN 12094-6:2001EN 12094-6:2001
PreviousNext
Standard
EN 12094-6:2001
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&2Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 6: Anforderungen und Prüfverfahren für nichtelektrischeBlockiereinrichtungen für CO2-AnlagenInstallations fixes de lutte contre l'incendie - Eléments constitutifs des installations d'extinction a gaz - Partie 6: Exigences et méthodes d'essai pour dispositifs non électriques de mise hors service pour systemes a CO2Fixed firefighting systems - Components for gas extinguishing systems
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 671-2:2012(Main)
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
SIST EN 671-2:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with lay-flat hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
Furthermore, it provides also for requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-1:2012(Main)
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
SIST EN 671-1:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
It also provides requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements can be necessary in such cases.
This European Standard is applicable to both manual and automatic fire hose reels for installation with and without cabinets.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12094-7:2000(Main)
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
SIST EN 12094-7:2001

This European Standard specifies requirements and test methods for nozzles which introduce the extinguishing agent into a CO 2 protected zone. The design of the nozzles will influence discharge rate and thus the pressure drop in the piping network. The
extinguishing agent normally arrives at the nozzle in two-phase flow form (liquid-gaseous mixture). It expands into the protected volume to form a gas or a gas-and-dry-ice mixture depending on the nozzle type. This standard should only be used as guidance for testing nozzles which work on different principles.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12094-7(Main)
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles
oSIST prEN 12094-7:2006

This document specifies requirements and test methods for room protection nozzles which introduce CO2, inert gas or halocarbon gas into a protected zone. The design of the nozzles will influence discharge rate and thus the pressure drop in the piping network. This standard is not applicable to local application nozzles.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 54-22:2015+A1:2020(Main)
Fire detection and fire alarm systems - Part 22: Resettable line-type heat detectors
SIST EN 54-22:2015+A1:2020

This European Standard applies to resettable line-type heat detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works (see EN 54-1:2011).
This European Standard specifies the requirements and performance criteria, the corresponding test methods and provides for the Assessment and Verification of Constancy of Performance (AVCP) of resettable line-type heat detectors to this EN.
This European Standard also covers resettable line-type heat detectors intended for use in the local protection of plant and equipment.
Resettable line-type heat detectors with special characteristics and developed for specific risks are not covered by this EN.
This European Standard does not cover line-type heat detectors that are based on non-resettable, fixed temperature electrical cables (so called digital systems).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-1:2012(Main)
Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose
SIST EN 671-1:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with semi-rigid hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
It also provides requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements can be necessary in such cases.
This European Standard is applicable to both manual and automatic fire hose reels for installation with and without cabinets.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 671-2:2012(Main)
Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose
SIST EN 671-2:2012

This European Standard specifies requirements and methods of test for the construction and performance of fire hose reel systems with lay-flat hose for installation in buildings, permanently connected to a water supply, for use by the occupants.
Furthermore, it provides also for requirements on evaluation of conformity and marking of these products.
Its requirements may apply in general for other applications, for example in marine applications or in aggressive environments, but additional requirements may be necessary in such cases.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12094-7:2000(Main)
Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO2 systems
SIST EN 12094-7:2001

This European Standard specifies requirements and test methods for nozzles which introduce the extinguishing agent into a CO 2 protected zone. The design of the nozzles will influence discharge rate and thus the pressure drop in the piping network. The
extinguishing agent normally arrives at the nozzle in two-phase flow form (liquid-gaseous mixture). It expands into the protected volume to form a gas or a gas-and-dry-ice mixture depending on the nozzle type. This standard should only be used as guidance for testing nozzles which work on different principles.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 3-8 rev(Main)
Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
oSIST prEN 3-8:2014

This European Standard specifies the rules of design, type testing, fabrication and inspection control of portable fire extinguishers which comply with the requirements of EN 3 7; with metallic bodies as far as pressure risk is concerned.
This part of EN 3 applies to portable fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30 bar and containing non-explosive, non-flammable, non-toxic and non-oxidising fluids.
This European Standard also applies to the marking of metallic propellant gas cartridges (see Annex E).
This European Standard does not apply to carbon dioxide fire extinguishers.
NOTE   Annex A gives the classification of the different parts forming the portable fire extinguisher.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 54-22(Main)
Fire detection and fire alarm system - Part 22 : Resettable line type heat detectors
oSIST prEN 54-22:2011

This European Standard applies to Resettable Line type Heat Detectors consisting of a sensing element using an optical fibre, a pneumatic tube or an electrical sensor cable connected to a sensor control unit, either directly or through an interface module to a control and indicating equipment intended for use in fire detection and fire alarm systems installed in and around buildings and civil engineering works.
This European Standard specifies the requirements and performance criteria, the corresponding test methods and the evaluation of conformity of the product to the standard.
This European Standard also covers Resettable Line type Heat Detectors intended for use in the local protection of plant and equipment.
Resettable Line type Heat Detectors with special characteristics and developed for specific risks are not covered by this standard.
This European Standard does not cover line-type heat detectors that are based on non-resettable, fixed temperature electrical cables (so called "digital" systems).

  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day