EN 13480-5:2012

Metallic industrial piping - Part 5: Inspection and testing

This part of EN 13480 describes the requirements for inspection and testing to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3 and fabricated and installed in accordance with EN 13480-4.

Metallische industrielle Rohrleitungen - Teil 5: Prufüng

Dieser Teil der EN 13480 beschreibt die Anforderungen an die Prüfungen, die bei Fertigung und Verlegung nach EN 13480-4 an einzelnen, nach EN 13480-3 ausgelegten vorgefertigten Baugruppen (Spools) oder Rohrleitungssystemen einschließlich Halterungen durchzuführen sind.

Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle

La présente partie de la norme européenne spécifie les exigences relatives à l'inspection et au contrôle tels que définis dans prEN 13480-1:1999, à exécuter sur les éléments de tuyauteries préfabriqués ou sur les réseaux de tuyauteries, supports compris, conçus conformément à prEN 13480-3 et à prEN 13480-6, et fabriqués et installés conformément à prEN 13480-4.

Kovinski industrijski cevovodi - 5. del: Pregled in preskušanje

Ta del tega evropskega standarda določa zahteve za pregled in preskušanje industrijskih cevovodov, kot določa standard EN 13480-1:2012, ki ju je treba izvesti na posameznih navitjih cevnih sistemov, vključno z nosilci, ki so konstruirani v skladu s standardoma EN 13480-3:2012 in EN 13480-6:2012 (če je to potrebno) ter izdelani in vgrajeni v skladu s standardom EN 13480-4:2012.

General Information

• Status: Withdrawn
• Publication Date: 26-Jun-2012
• Withdrawal Date: 27-Jun-2017
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 8 - Maintenance of EN 13480 series
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jun-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-5:2012 - Metallic industrial piping - Part 5: Inspection and testing

Relations

• Replaces: EN 13480-5:2002/A1:2011 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022
• Replaces: EN 13480-5:2002 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 20-Jun-2012
• Replaced By: EN 13480-5:2017 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-5:2012/A1:2013 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-5:2012/A3:2017 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-5:2012/A2:2017 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 5. del: Pregled in preskušanjeMetallische industrielle Rohrleitungen - Teil 5: PrufüngTuyauteries industrielles métalliques - Partie 5: Inspection et contrôleMetallic industrial piping - Part 5: Inspection and testing77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-5:2012SIST EN 13480-5:2012en,fr,de01-oktober-2012SIST EN 13480-5:2012SLOVENSKI
STANDARDSIST EN 13480-5:2002/A1:2011SIST EN 13480-5:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13480-5
June 2012 ICS 23.040.01 Supersedes EN 13480-5:2002English Version
Metallic industrial piping - Part 5: Inspection and testing
Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle
Metallische industrielle Rohrleitungen - Teil 5: Prufüng This European Standard was approved by CEN on 8 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13480-5:2012: ESIST EN 13480-5:2012

Inspection of safety systems . 33 Annex Y (informative)
History of EN 13480-5 . 34 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Pressure Equipment Directive (97/23/EC) . 35
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
This European Standard EN 13480 for metallic industrial piping consists of eight interdependent and not dissociable Parts which are:  Part 1: General;  Part 2: Materials;  Part 3: Design and calculation;  Part 4: Fabrication
...