EN 13480-5:2002

Metallic industrial piping - Part 5: Inspection and testing

This part of EN 13480 describes the requirements for inspection and testing to be performed on individual spools or piping systems, including supports, designed in accordance with EN 13480-3 and fabricated and installed in accordance with EN 13480-4.

Metallische industrielle Rohrleitungen - Teil 5: Prufüng

Dieser Teil der EN 13480 beschreibt die Anforderungen an die Prüfungen, die bei Fertigung und Verlegung nach EN 13480-4 an einzelnen, nach EN 13480-3 ausgelegten vorgefertigten Baugruppen (Spools) oder Rohrleitungssystemen einschließlich Halterungen durchzuführen sind.

Tuyauteries industrielles métalliques - Partie 5: Inspection et contrôle

La présente partie de la norme européenne spécifie les exigences relatives à l'inspection et au contrôle tels que définis dans prEN 13480-1:1999, à exécuter sur les éléments de tuyauteries préfabriqués ou sur les réseaux de tuyauteries, supports compris, conçus conformément à prEN 13480-3 et à prEN 13480-6, et fabriqués et installés conformément à prEN 13480-4.

Kovinski industrijski cevovodi - 5. del: Kontrola in preskušanje

General Information

• Status: Withdrawn
• Publication Date: 28-May-2002
• Withdrawal Date: 26-Jun-2012
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 5 - Inspection and testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jun-2012
• Completion Date: 27-Jun-2012
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-5:2002 - Metallic industrial piping - Part 5: Inspection and testing

Relations

• Replaced By: EN 13480-5:2012 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 20-Jun-2012
• Amended By: EN 13480-5:2002/A1:2011 - Metallic industrial piping - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022
• Parent: EN 13480-1:2002 - Metallic industrial piping - Part 1: General
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 5. del: Kontrola in preskušanjeMetallische industrielle Rohrleitungen - Teil 5: PrufüngTuyauteries industrielles métalliques - Partie 5: Inspection et contrôleMetallic industrial piping - Part 5: Inspection and testing77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-5:2002SIST EN 13480-5:2002en01-november-2002SIST EN 13480-5:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13480-5May 2002ICS 23.040.01English versionMetallic industrial piping - Part 5: Inspection and testingTuyauteries industrielles métalliques - Partie 5: Inspectionet contrôleMetallische industrielle Rohrleitungen - Teil 5: PrufüngThis European Standard was approved by CEN on 23 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13480-5:2002 ESIST EN 13480-5:2002

review.96.3.1System design review.96.3.2Review of design calculations.96.3.3Incomplete documentation.96.3.4Additional procedures/qualifications.96.4Alternative proof of safety.96.5Manufacturer’s declaration of design compliance.107In-process inspection and testing.107.1General.107.2Materials and formed pressure retaining parts.107.2.1General.107.2.2Verification of material.107.2.3Verification of formed pressure retaining parts.107.2.4Non-destructive testing of formed parts.107.2.5Destructive testing of formed parts.117.3Welding.117.3.1Welding approvals.117.3.2Inspection of welding set-up.127.3.3Testing and inspection during welding.127.3.4Inspection after welding.127.4Heat treatment.128Non-destructive testing of welds.138.1Application of NDT.138.1.1General.138.1.2Examination of weld quality by sample inspection.148.1.3Imperfections revealed by sample inspection.148.2Circumferential butt, branch, fillet and seal welds.168.2.1Amount of examination.168.2.2Dissimilar metal joints.188.3Longitudinal welds.188.4NDT Methods.188.4.1General.188.4.2Acceptance criteria.188.4.3Personnel qualification.21SIST EN 13480-5:2002

Inspection of safety systems.31Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU directives.32SIST EN 13480-5:2002
...