Small craft - Craft identification - Coding system (ISO 10087:2019)

This document establishes a coding system to achieve identification of any small craft in terms of:
—          identification code of the country of the manufacturer of the craft;
—          identification code of the manufacturer;
—          serial number;
—          month and year of manufacture;
—          model year.
It applies to small craft of all types and materials, of hull length, LH, up to 24 m.

Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO 10087:2019)

Petits navires - Identification du bateau - Système de codage (ISO 10087:2019)

Le présent document établit un système de codage permettant l'identification de tout petit navire en termes de:
—          code d'identification du pays du constructeur du bateau;
—          code d'identification du constructeur;
—          numéro de série;
—          mois et année de construction;
—          année modèle.
Il s'applique aux petits navires de tous types et matériaux dont la longueur de coque LH est inférieure ou égale à 24 m.

Mala plovila - Identifikacija plovila - Kodirni sistem (ISO 10087:2019)

Ta dokument določa kodirni sistem za identifikacijo katerega koli malega plovila, kar zadeva:
– identifikacijsko kodo države proizvajalca plovila;
– identifikacijsko kodo proizvajalca;
– serijsko številko;
– mesec in leto izdelave;
– modelno leto.
Uporablja se za mala plovila vseh tipov in materialov z dolžino trupa (LH) največ 24 m.

General Information

Status
Withdrawn
Publication Date
19-Mar-2019
Withdrawal Date
15-Mar-2022
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
16-Mar-2022

Relations

Buy Standard

Standard
EN ISO 10087:2019
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2019
1DGRPHãþD
SIST EN ISO 10087:2006
Mala plovila - Identifikacija plovila - Kodirni sistem (ISO 10087:2019)
Small craft - Craft identification - Coding system (ISO 10087:2019)
Kleine Wasserfahrzeuge - Schiffskörper-Kennzeichnung - Codierungssystem (ISO
10087:2019)
Petits navires - Identification du bateau - Système de codage (ISO 10087:2019)
Ta slovenski standard je istoveten z: EN ISO 10087:2019
ICS:
35.040.99 Drugi standardi v zvezi s Other standards related to
kodiranjem informacij information coding
47.080 ýROQL Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10087
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 10087:2006
English Version
Small craft - Craft identification - Coding system (ISO
10087:2019)
Petits navires - Identification du bateau - Système de Kleine Wasserfahrzeuge - Schiffskörper-
codage (ISO 10087:2019) Kennzeichnung - Codierungssystem (ISO 10087:2019)
This European Standard was approved by CEN on 24 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10087:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

European foreword
This document (EN ISO 10087:2019) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with Technical Committee CEN/SS T01 “Shipbuilding and maritime structures”
the secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10087:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10087:2019 has been approved by CEN as EN ISO 10087:2019 without any modification.

Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
M/542/C(2015) 8736 final to provide one voluntary means of conforming to essential requirements of
Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding essential requirements
of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex 1 and Annex II of
Directive 2013/53/EU
Essential Requirements of Clause(s)/sub-clause(s) Remarks/Notes
Directive 2013/53/EU of this EN
Annex I.A.2.1 - Watercraft All Clauses of this standard For compliance with
Identification except sub-clause 4.3 Annex I.A.2.1 (2), the ‘unique
identification code’ referred to
in sub-clause 4.3 of this
standard shall mean the unique
code of the manufacturer and
shall be assigned according to
the particular rules set out in
Commission Implementing
Regulation (EU) 2017/1 of
3 January 2017 on procedures
for watercraft identification
under Directive 2013/53/EU of
the European Parliament and of
the Council on recreational craft
and personal watercraft.
ANNEX V - Equivalent All Clauses of this standard In the case of post-construction
conformity based on post except sub-clause 4.3 assessment referred to in
construction assessment Article 19 and Article 23 of
(Module PCA). Directive 2013/53/EU, the
Watercraft Identification
Number described in Annex
I.A.2.1 (2) shall comply with the
provisions set out in Annex V.4.3
of Directive 2013/53/EU and
the procedure according to
Article 8 of Commission
Implementing Regulation (EU)
2017/1 of 3 January 2017.
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 10087
Fourth edition
2019-02
Small craft — Craft identification —
Coding system
Petits navires — Identification du bateau — Système de codage
Reference number
ISO 10087:2019(E)
©
ISO 2019
ISO 10087:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 10087:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Composition of craft identification number . 2
5 Requirements . 3
5.1 Size . 3
5.2 Permanency of marking . 3
5.3 Location . 3
5.4 Duplicate identification number . 4
5.5 Time of marking . 4
5.6 Display format . 4
6 Additional information . 4
ISO 10087:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www .iso .org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 188, Small craft.
This fourth edition cancels and replaces the third edition (ISO 10087:2006), which has been technically
modified.
The main changes compared to the previous edition are as follows:
— new definitions 3.3 and 3.4 (country of manufacturer and small craft);
— updated manufacturer’s identification code requirements (namely in 4.3, 4.4, 4.5, 4.6 and 5.2).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

INTERNATIONAL STANDARD ISO 10087:2019(E)
Small craft — Craft identification — Coding system
1 Scope
This document establishes a coding system to achieve identification of any small craft in terms of:
— identification code of the country of the manufacturer of the craft;
— identification code of the manufacturer;
— serial number;
— month and year of manufacture;
— model year.
It applies to small craft of all types and materials, of hull length, L , up to 24 m.
H
2 Normative reference
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.