EN ISO 19903:2006
(Main)Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006)
Petroleum and natural gas industries - Fixed concrete offshore structures (ISO 19903:2006)
ISO 19903:2006 specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas industries, and specifically addresses the design, construction, transportation and installation of new structures, including requirements for in-service inspection and possible removal of structures, the assessment of structures in service, and the assessment of structures for reuse at other locations.
Erdöl- und Erdgasindustrie - Feststehende Offshore-Betonkonstruktionen (ISO 19903:2006)
Industries du pétrole et du gaz naturel - Structures en mer fixes en béton (ISO 19903:2006)
L'ISO 19903:2006 spécifie les exigences et délivre des recommandations applicables à des structures en mer fixes en béton pour les industries du pétrole et du gaz naturel, et aborde en particulier la conception, la construction, le transport et l'installation de nouvelles structures, y compris les exigences concernant une inspection en service et un retrait possible de structures, l'évaluation de structures en service et l'évaluation de structures destinées à être réutilisées à d'autres endroits.
Industrija nafte in zemeljskega plina - Nepremične betonske strukture naftnih ploščadi (ISO 19903:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2007
,QGXVWULMDQDIWHLQ]HPHOMVNHJDSOLQD1HSUHPLþQHEHWRQVNHVWUXNWXUHQDIWQLK
SORãþDGL ,62
Petroleum and natural gas industries - Fixed concrete offshore structures (ISO
19903:2006)
Erdöl- und Erdgasindustrie - Feststehende Offshore-Betonkonstruktionen (ISO
19903:2006)
Industries du pétrole et du gaz naturel - Structures en mer fixes en béton (ISO
19903:2006)
Ta slovenski standard je istoveten z: EN ISO 19903:2006
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 19903
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 75.180.10
English Version
Petroleum and natural gas industries - Fixed concrete offshore
structures (ISO 19903:2006)
Industries du pétrole et du gaz naturel - Structures en mer Erdöl- und Erdgasindustrie - Feststehende Offshore-
fixes en béton (ISO 19903:2006) Betonkonstruktionen (ISO 19903:2006)
This European Standard was approved by CEN on 25 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19903:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 19903:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2007, and conflicting national
standards shall be withdrawn at the latest by June 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 19903:2006 has been approved by CEN as EN ISO 19903:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 19903
First edition
2006-12-01
Petroleum and natural gas industries —
Fixed concrete offshore structures
Industries du pétrole et du gaz naturel — Structures en mer fixes en
béton
Reference number
ISO 19903:2006(E)
©
ISO 2006
ISO 19903:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 19903:2006(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Symbols and abbreviated terms . 8
4.1 Symbols . 8
4.2 Abbreviated terms . 10
5 General requirements. 11
5.1 General. 11
5.2 National requirements. 11
5.3 Overall planning requirements. 11
5.4 Functional requirements. 12
5.5 Structural requirements . 13
5.6 Design requirements . 14
6 Actions and action effects . 16
6.1 General. 16
6.2 Environmental actions . 17
6.3 Other actions. 22
6.4 Partial factors for actions . 27
6.5 Combinations of actions. 28
6.6 Exposure levels. 30
7 Structural analysis. 31
7.1 General. 31
7.2 General principles. 31
7.3 Physical representation . 34
7.4 Types of analyses. 38
7.5 Analyses requirements . 41
8 Concrete works . 46
8.1 General. 46
8.2 Design . 48
8.3 Materials . 51
8.4 Execution. 57
8.5 Geometrical tolerances . 70
8.6 Quality control — Inspection, testing and corrected actions . 73
9 Foundation design. 77
9.1 Introduction . 77
9.2 General. 77
9.3 Soil investigation . 78
9.4 Representative soil properties . 78
9.5 Partial factors for actions and materials . 78
9.6 Geotechnical design principles. 79
9.7 Bearing and sliding stability. 80
9.8 Soil reactions on structures . 81
9.9 Installation and removal. 81
9.10 Scour. 82
10 Mechanical systems . 82
ISO 19903:2006(E)
10.1 Introduction . 82
10.2 Permanent mechanical systems. 83
10.3 Mechanical systems — Temporary . 90
10.4 Attachments and penetrations . 93
10.5 Mechanical systems — Special considerations . 94
11 Marine operations and construction afloat . 95
11.1 General . 95
11.2 Engineering and planning. 96
12 Corrosion control. 96
12.1 Introduction . 96
12.2 Design for corrosion control. 98
12.3 Fabrication and installation of systems for corrosion control. 102
13 Topsides interface design. 103
13.1 Introduction .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.