EN ISO 10140-4:2010

Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)

ISO 10140-4:2010 specifies the basic measurement procedures for airborne and impact sound insulation in laboratory test facilities.

Akustik - Messung der Schalldämmung von Bauteilen im Prüfstand - Teil 4: Messverfahren und Anforderungen (ISO 10140-4:2010)

Dieser Teil der ISO 10140 legt die grundlegenden Verfahren zur Messung der Luftschall- und
Trittschalldämmung in Laborprüfständen fest.

Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 4: Exigences et modes opératoires de mesure (ISO 10140-4:2010)

L'ISO 10140-4:2010 spécifie les modes opératoires de base de mesurage de l'isolation au bruit aérien et au bruit de choc dans des installations d'essai en laboratoire.

Akustika - Laboratorijsko merjenje zvočne izolirnosti gradbenih elementov - 4. del: Merilni postopki in zahteve (ISO 10140-4:2010)

Ta del ISO 10140 določa osnovne merilne postopke zvočne izolirnosti pred zvokom v zraku in udarnim zvokom v laboratorijih.

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2010
• Withdrawal Date: 04-May-2021
• ICS: 91.120.20 - Acoustics in building. Sound insulation
• Technical Committee: CEN/TC 126 - Acoustic properties of building products and of buildings
• Drafting Committee: CEN/TC 126/WG 1 - Methods for measuring the sound insulation of building elements and the acoustic performances of buildings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-May-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/100 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on precast concrete products
• Ref Project: SIST EN ISO 10140-4:2010 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)

Relations

• Replaces: EN 20140-10:1992 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements (ISO 140-10:1991)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-16:2006 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO 140-16:2006)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-6:1998 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-3:1995/A1:2004 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements - Amendment 1: Installation guidelines for lightweight twin leaf partitions (ISO 140-3:1995/AM 1:2004)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-8:1997 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-3:1995 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-11:2005 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-1:1997 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 140-1:1997/A1:2004 - Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission - Amendment 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions (ISO 140-1:1997/AM 1:2004)
• Effective Date: 08-Jun-2022
• Replaced By: EN ISO 10140-4:2021 - Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
• Effective Date: 12-May-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10140-4:2010
01-december-2010
1DGRPHãþD
SIST EN 20140-10:1997
SIST EN ISO 140-1:1998
SIST EN ISO 140-1:1998/A1:2005
SIST EN ISO 140-11:2005
SIST EN ISO 140-16:2006
SIST EN ISO 140-3:1997
SIST EN ISO 140-3:1997/A1:2005
SIST EN ISO 140-6:1999
SIST EN ISO 140-8:1998
$NXVWLND/DERUDWRULMVNRPHUMHQMH]YRþQHL]ROLUQRVWLJUDGEHQLKHOHPHQWRYGHO
0HULOQLSRVWRSNLLQ]DKWHYH,62
Acoustics - Laboratory measurement of sound insulation of building elements - Part 4:
Measurement procedures and requirements (ISO 10140-4:2010)
Akustik - Messung der Schalldämmung von Gebäudeteilen im Prüfstand - Teil 4:
Messverfahren und Anforderungen (ISO 10140-4:2010)
Acoustique - Détermination de l'isolation acoustique des éléments de construction -
Partie 4: Modes opératoires et exigences de mesure (ISO 10140-4:2010)
Ta slovenski standard je istoveten z: EN ISO 10140-4:2010
ICS:
91.120.20 $NXVWLNDYVWDYEDK=YRþQD Acoustics in building. Sound
L]RODFLMD insulation
SIST EN ISO 10140-4:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10140-4:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 10140-4:2010


EUROPEAN STANDARD
EN ISO 10140-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2010
ICS 91.120.20 Supersedes EN 20140-10:1992, EN ISO 140-1:1997, EN
ISO 140-11:2005, EN ISO 140-16:2006, EN ISO 140-
3:1995, EN ISO 140-6:1998, EN ISO 140-8:1997
English Version
Acoustics - Laboratory measurement of sound insulation of
building elements - Part 4: Measurement procedures and
requirements (ISO 10140-4:2010)
Acoustique - Mesurage en laboratoire de l'isolation Akustik - Messung der Schalldämmung von Gebäudeteilen
acoustique des éléments de construction - Partie 4:
im Prüfstand - Teil 4: Messverfahren und Anforderungen
Exigences et modes opératoires de mesure (ISO 10140- (ISO 10140-4:2010)
4:2010)
This European Standard was approved by CEN on 14 August 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10140-4:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10140-4:2010
EN ISO 10140-4:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10140-4:2010
EN ISO 10140-4:2010 (E)
Foreword
This document (EN ISO 10140-4:2010) has been prepared by Technical Committee ISO/TC 43 "Acoustics" in
collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of
buildings” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at
the latest by March 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 140-1:1997, EN ISO 140-8:1997, EN ISO 140-11:2005,
EN 20140-10:1992, EN ISO 140-3:1995, EN ISO 140-6:1998, EN ISO 140-16:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Fr
...