Personal protective equipment - Knee protectors for work in the kneeling position - Part 4: Requirements for the combination of interoperable knee pads and garments (type 2)

This document specifies requirements for interoperable knee pads to use in garments and for garments to use with interoperable knee pads and defines performance levels for use when working in a kneeling position in order to reduce injuries to the knees caused by continuous pressure and penetration. Requirements for the marking of the interoperable knee pad and the information to be supplied by the manufacturer are given. Where protection against additional hazards is claimed, performance requirements from other standards are applicable.
This document does not apply to knee protectors that are medical devices or are intended for sports and motorcycles.
In this document requirements are given for a combination of a garment with a fixed sized knee pad pocket and fixed sized knee pad (interoperable pad).
A specific combination of an individual pad and accordingly designed garment is described in FprEN 14404 3 and is excluded from this part.

Persönliche Schutzausrüstung - Knieschutz für Arbeiten in kniender Haltung - Teil 4: Anforderungen für die Kombination von interoperablen Kniepolstern und Bekleidung (Typ 2)

Dieses Dokument legt die Anforderungen an interoperable Kniepolster zur Anwendung in Bekleidung und für Bekleidung zu Anwendung mit interoperablen Kniepolstern und die Leistungsstufen für den Einsatz bei Arbeiten in kniender Haltung fest, um Knieverletzungen zu verringern, die durch ständigen Druck und Penetration verursacht werden. Es werden Anforderungen an die Kennzeichnung des interoperablen Kniepolsters und die Herstellerinformationen gestellt. Ist Schutz gegen zusätzliche Gefährdungen erforderlich, gelten Leistungsanforderungen anderer Normen.
Dieses Dokument gilt nicht für Knieschützer, die ein Medizinprodukt oder für Sport und Motorräder vorgesehen sind.
In diesem Dokument werden Anforderungen an eine Kombination von Bekleidung mit einer Kniepolstertasche mit einer festen Größe und einem Kniepolster mit einer festen Größe (interoperables Polster) angegeben.
Eine besondere Kombination eines einzelnen Polsters und entsprechend ausgelegter Bekleidung ist in FprEN 14404 3 beschrieben und von diesem Teil ausgeschlossen.

Équipements de protection individuelle - Protecteurs de genoux pour le travail à genoux - Partie 4 : Exigences relatives à la combinaison de plaques de genouillères interopérables et de vêtements (type 2)

Le présent document spécifie les exigences relatives aux plaques de genouillères interopérables à utiliser dans des vêtements et aux vêtements à utiliser avec des plaques de genouillères interopérables, et définit les niveaux de performance pour le travail à genoux afin de réduire les blessures aux genoux causées par une pression et une pénétration continues. Il présente les exigences de marquage de la plaque de genouillère interopérable ainsi que la notice d’information du fabricant. Si une protection contre des dangers additionnels est requise, les exigences de performance d’autres normes sont applicables.
Le présent document ne s’applique pas aux protecteurs de genoux qui sont des dispositifs médicaux ou sont destinés aux sports et aux motos.
Le présent document énonce les exigences relatives à la combinaison d’un vêtement doté d’une poche pour plaque de genouillère de taille fixe et d’une plaque de genouillère de taille fixe (plaque interopérable).
Une combinaison spécifique d’une plaque individuelle et d’un vêtement conçu pour l’accueillir est décrite dans le FprEN 14404 3 et est exclue de la présente partie.

Osebna varovalna oprema - Ščitniki za kolena za delo v klečečem položaju - 4. del: Zahteve za kombinacijo interoperabilnih kolenskih podlog in oblačil (tip 2)

General Information

Status
Not Published
Publication Date
30-Apr-2024
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
20-Jun-2022
Due Date
28-Jan-2021
Completion Date
20-Jun-2022

Relations

Buy Standard

Draft
prEN 14404-4:2019
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14404-4:2019
01-maj-2019
2VHEQDYDURYDOQDRSUHPDâþLWQLNL]DNROHQD]DGHORYNOHþHþHPSRORåDMXGHO
=DKWHYH]DNRPELQDFLMRLQWHURSHUDELOQLKNROHQVNLKSRGORJLQREODþLO WLS
Personal protective equipment - Knee protectors for work in the kneeling position – Part
4: Requirements for the combination of interoperable knee pads and garments (type 2)
Persönliche Schutzausrüstung - Knieschutz für Arbeiten in kniender Haltung - Teil 4:
Anforderungen für die Kombination von interoperablen Kniepolstern und Bekleidung (Typ
2)
Équipements de protection individuelle - Protection des genoux pour le travail à genoux -
Partie 4 : Exigences relatives à la combinaison de genouillères interopérables et de
vêtements (type 2)
Ta slovenski standard je istoveten z: prEN 14404-4
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
oSIST prEN 14404-4:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14404-4:2019

---------------------- Page: 2 ----------------------
oSIST prEN 14404-4:2019


DRAFT
EUROPEAN STANDARD
prEN 14404-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2019
ICS 13.340.50 Will supersede EN 14404:2004+A1:2010
English Version

Personal protective equipment - Knee protectors for work
in the kneeling position - Part 4: Requirements for the
combination of interoperable knee pads and garments
(type 2)
 Persönliche Schutzausrüstung - Knieschutz für
Arbeiten in kniender Haltung - Teil 4: Anforderungen
für die Kombination von interoperablen Kniepolstern
und Bekleidung (Typ 2)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14404-4:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14404-4:2019
prEN 14404-4:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Performance levels . 6
5 Requirements . 6
5.1 Interoperable padding . 6
5.2 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.