EN ISO 11126-4:1998

Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993)

Specifies requirements for coal furnace slag abrasives: designation, sampling, identification and marking, information to be supplied by the manufacturer or supplier, ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides. The requirements specified apply to abrasives supplied in the "new" condition only.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 4: Strahlmittel aus Schmelzkammerschlacke (ISO11126-4:1993)

Dieser Teil von ISO 11126 legt Anforderungen für Strahlmittel aus Schmelzkammerschlacke fest. Er legt Bereiche für die Korngröße und Grenzwerte für scheinbare Dichte, Härte, Feuchtegehalt, Leitfähigkeit des wäßrigen Eluates (wasserlösliche Verunreinigungen) und wasserlösliche Chloride fest. Die in diesem Teil von ISO 11126 festgelegten Anforderungen gelten nur für im "Neuzustand" gelieferte, unbenutzte Strahlmittel. Sie gelten nicht für Strahlmittel während oder nach der Verwendung.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés à la préparation par projection - Partie 4: Scories de chaudière à charbon (ISO 11126-4:1993)

La IEC 60684-3-214:2013 fournit les exigences relatives à deux types de gaines thermorétractables, en polyoléfine, non ignifugées, à paroi épaisse et moyenne, dont le rapport de rétreint nominal est 3:1. Ces gaines se sont avérées appropriées pour des températures allant jusqu'à 100 °C.
Type A: Paroi moyenne - diamètre intérieur jusqu'à 200 mm typiquement;
Type B: Paroi épaisse - diamètre intérieur jusqu'à 200 mm typiquement. Ces gaines sont normalement fournies en couleur noire. Comme ces types de gaines couvrent une gamme très étendue de tailles et d'épaisseurs de paroi, les Tableaux A.1 et A.2 du présent document fournissent un guide des tailles disponibles dans cette gamme. La taille réelle fera l'objet d'un accord entre l'utilisateur et le fournisseur. Les matériaux qui sont conformes à cette spécification satisfont à des niveaux de performances établis. Cependant, il convient que le choix d'un matériau par un utilisateur, pour une application spécifique, soit fondé sur les exigences réelles nécessaires pour obtenir une performance adéquate pour l'application concernée, et ne soit pas fondé sur cette seule spécification. Cette troisième édition annule et remplace la deuxième édition parue en 2005. Cette édition constitue une révision technique. Cette édition inclut la modification technique majeure suivante par rapport à l'édition précédente: Alignement avec la CEI 60684-3-247 (double paroi) étant donné que cette spécification de la Partie 3 représente une option à simple paroi utilisant un matériau identique.
Mots clés : gaines thermorétractables, en polyoléfine gaines

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Specifikacije za nekovinske granulate za peskanje - 4. del: Premogova pečna žlindra (ISO 11126-4:1993)

General Information

• Status: Withdrawn
• Publication Date: 17-Mar-1998
• Withdrawal Date: 02-Oct-2018
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 03-Oct-2018
• Ref Project: SIST EN ISO 11126-4:1998 - Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993)

Relations

• Replaced By: EN ISO 11126-4:2018 - Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018)
• Effective Date: 11-Jun-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Anforderungen an nichtmetallische Strahlmittel - Teil 4: Strahlmittel aus Schmelzkammerschlacke (ISO11126-4:1993)Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Spécifications pour abrasifs non métalliques destinés a la préparation par projection - Partie 4: Scories de chaudiere a charbon (ISO 11126-4:1993)Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993)25.220.10Priprava površineSurface preparationICS:Ta slovenski standard je istoveten z:EN ISO 11126-4:1998SIST EN ISO 11126-4:1998en01-junij-1998SIST EN ISO 11126-4:1998SLOVENSKI
STANDARD
INTERNATIONAL STANDARQ ISO 11126-4 First edition 1993-12-15 Preparation of steel Substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag Preparation des subjectiles d’acier avant application de peintures et de produits assimik - Spkifica tions pour abrasifs non m6 talliques destines 2 Ia prdparation par projection - Partie 4: Stories de chaudikre A charbon Reference number ISO 11126-4:1993(E) SIST EN ISO 11126-4:1998

ISO 11126=4:1993(El) Foreword ISO (the lnternational Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizstions, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 7% % of the member bodies casting a vote, International Standard ISO 11126-4 was prepared by Technical Committee lSO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel Substrates before application of paints and related products. ISO % 1% 26 consists of the following Parts, under the general title Prep- aration sf steel Substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives: - Part 1: General introduction and classifica tion - Part 2: Silica sand - Part 3: Copper refinery slag - Part 4: Coal furnace slag - Part 5: Alickel refinery slag - Part 6: Iron furnace slag - Part 7: Fused aluminium Oxide - Part 8: Olivine sand - Part 9: Staurolite 0 ISO 1993 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-l 211 Geneve 20 0 Switzerland Printed in Switzerland ii SIST EN ISO 11126-4:1998

63 ISO ISO 11126=4:1993(E) - Part 10: Garnet At the time of publication of this part of ISO 11126, Parts 2, 7, 9 and 10 were in course of preparation. Annex A of this part of ISO 1 ‘ll26 is for information only. SIST EN ISO 11126-4:1998

This page intentionally left blank SIST EN ISO 11126-4:1998

INTERNATIONAL STANDARD 0 ISO ISO ‘lll26=4:1993(E) Preparation of steel Substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag WARNING - Equipment, materials and abrasives used for surface preparation tan be hazardous if used carelessly. Many national regulations exist for those materials and abrasives that are considered to be hazardous during or after use [waste managementl), such as free silica or carcinogenic or toxic substances. These regulations are therefore to be observed. lt is important to ensure that adequate instructions are given and that all required precautions are exercised. 1 Scope This part of ISO 11126 specifies requirements for coal furnace slag abrasives, as supplied for blast-cleaning processes. lt specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water- soluble chlorides. The requirements specified in this part of ISO 11126 apply to abrasives supplied in the “ne,” condition only. They do not apply PO abrasives either during or after use. Test methods for non-metallic blast-cleaning abrasives are given in the various Parts of ISO 11127. NOTES 1 Information on commonly referenced national Standards for non-metallic abrasives is given in annex A. 2 Although this part of ISO 11126 has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appro- priate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These tech- niques are described in ISO 8504-2:1992, Reparation of steel Substrates before application of paints and related products - Surface preparation methods - Part 2: Abras- ive blas t-cleaning. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 11126. At the time of publication, the editions indicated were valid. All Standards are subject PO revision, and Parties to agreements based on this part of ISO 11126 are encouraged to investi- gate the possibility of applying the most recent edi- tions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 11127-1 :1993, Preparation of steel Substrates be fore applic
...