Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

Verstärkung - Spezifikationen für Gewebe - Teil 2: Prüfverfahren und allgemeine Anforderungen

1.1  Teil 2 der EN 13417 legt Prüfverfahren fest, die anzuwenden sind, um die beschriebenen und festgelegten
Eigenschaften aus EN 13417-1 und EN 13417-3 festzustellen.
1.2  Dieser Teil 2 von EN 13417 legt die allgemeinen Anforderungen fest, die auf alle Gewebe, die unter diese Norm
fallen, wie in EN 13417-1 definiert, anzuwenden sind.

Renfort - Spécifications des tissus - Partie 2: Méthodes d'essai et exigences générales

1.1   Cette partie 2 de la EN 13417 définit les méthodes d'essai à utiliser pour déterminer les caractéristiques de désignation et de spécification données respectivement dans les parties 1 et 3.
1.2   Cette partie 2 de la EN 13417 définit les exigences générales applicables aux spécifications de tous les types de tissus inclus dans le domaine d'application de cette spécification et définis dans la partie 1 de la norme.

Ojačitve - Specifikacije za tkanine - 2. del: Preskusne metode in splošne zahteve

General Information

Publication Date
Technical Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date

Buy Standard

EN 13417-2:2002
English language
8 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verstärkung - Spezifikationen für Gewebe - Teil 2: Prüfverfahren und allgemeine AnforderungenRenfort - Spécifications des tissus - Partie 2: Méthodes d'essai et exigences généralesReinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements59.100.01Materials for the reinforcement of composites in generalICS:Ta slovenski standard je istoveten z:EN 13417-2:2001SIST EN 13417-2:2002en01-september-2002SIST EN 13417-2:2002SLOVENSKI

SIST EN 13417-2:2002

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13417-2October 2001ICS 59.100.01English versionReinforcement - Specifications for woven fabrics - Part 2:Methods of test and general requirementsRenfort - Spécifications des tissus - Partie 2: Méthodesd'essai et exigences généralesVerstärkung - Spezifikationen für Gewebe - Teil 2:Prüfverfahren und allgemeine AnforderungenThis European Standard was approved by CEN on 16 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13417-2:2001 ESIST EN 13417-2:2002

EN 13417-2:2001 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44List of Properties.44.1Physical Properties.55Sampling.56General Requirements.56.1Appearance.56.2Packaging.66.3Labelling.6Bibliography.8SIST EN 13417-2:2002

EN 13417-2:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 249 "Plastics", the secretariat ofwhich is held by IBN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest byApril 2002.EN 13417 consists of the following parts, under the general titre "Reinforcement – Specifications for woven fabrics": Part 1 : Designation Part 2 : Methods of tests and general requirements Part 3 : Specific requirementsThis standard includes a Bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.