ISO 10122:2014 provides a basis for specifications applicable to tubular braided sleeves used as reinforcements in plastics. It deals with tubular sleeves braided from all types of yarn or roving.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off

ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4602:2010 specifies two methods of determining the number of yarns per unit length of warp and weft of woven textile-reinforcement fabrics made of glass, carbon, aramid or any other (textile-diameter) reinforcement fibre.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off

This International Standard specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns. It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres. The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step. This International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only. The method is not applicable to products made from staple fibres.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns.
It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns. It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres.
The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step.
The International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only.
The method is not applicable to products made from staple fibres.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres. The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step. The International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only. The method is not applicable to products made from staple fibres.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

1.1   This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics.
1.2   This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.
The material used may be used on its own or in combination (hybrids).
1.3   The designation of a fabric is structured in a product hierarchy which includes several levels which determine families and sub-families of fabrics.
It is not intended that this hierarchy takes into account all the attributes of individual fabrics which may use different yarn types or different yarn counts. Neither is it intended to imply that woven fabrics having the same designation give necessarily the same performance.
This Part 1 of EN 13417 does not give engineering data, performance data or data which may be required to specify woven fabrics for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 13417-2.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2   The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
1.3   The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1. In 4.2 the manufacturer shall define other obligatory information to be included in the specification. Other parameters can be included in the specification by agreement between manufacture and customer. These parameters are defined in clause 4.3.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2   The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
1.3   The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1. In 4.2 the manufacturer shall define other obligatory information to be included in the specification. Other parameters can be included in the specification by agreement between manufacture and customer. These parameters are defined in clause 4.3.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics.
1.2   This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.
The material used may be used on its own or in combination (hybrids).
1.3   The designation of a fabric is structured in a product hierarchy which includes several levels which determine families and sub-families of fabrics.
It is not intended that this hierarchy takes into account all the attributes of individual fabrics which may use different yarn types or different yarn counts. Neither is it intended to imply that woven fabrics having the same designation give necessarily the same performance.
This Part 1 of EN 13417 does not give engineering data, performance data or data which may be required to specify woven fabrics for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 13417-2.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This European Standard specifies a method for the determination of the moisture content of reinfrocements products, such as continuous filament yarn, staple fibre yarn, rovings, chopped strands, mats, fabrics and other forms of reinforcements made form textile glass, carbon or aramid fibres.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Provides a basis for a specification applicable to fabrics woven from yarn made from textile glass, carbon or aramid and generally used for plastics reinforcements. Replaces the first edition.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

Applies to tapes braided from all types of yarn or roving used as reinforcements in plastics. Deals with designation, characteristics to be specified, defects, sampling and selection of test pieces, test methods, packaging and ordering.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

Migrated from Progress Sheet (TC Comment) (2000-07-10): TC would like to go in // but ISO has already done its DIS. Their FDIS is almost ++ ready. CEN/TC 249 has to submit ISO 1043-2 to UAP upon its publication (TA/0005)

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specified a method for the determination of the linear density of textile glass, carbon fibre and aramid fibre. It is applicable to all yarns including singles yarns, doubled and cabled, textured yarns, rovings and staple fibre yarns.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a method for the determination of twist in continuous filaments yarns made with textile glass, carbon or aramid. This method is not applicable to products made form staple fibres. For yarns without twist or with twist less than 10 T/m modified equipment is to be used in order to obtain the required precision (see paragraph 5.1).

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    French language
    sale 15% off
  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off

Provides a basis for specifications applicable to tubular braided sleeves used as reinforcements in plastics. Deals with tubular sleeves braided from all types of yarn or roving.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off

Designed for received batches. The choice of sampling plan and the extent of sampling depends on the knowledge of the product acquired by the customer. Specifies two methods and includes tables with acceptance and rejection criteria based on a given number of acceptable quality levels (AQLs). Defines the inspection by qualitative characteristics (attributes) and the inspection by measurements (variables). The document describes the choice of sampling plan, gives information on the severity of inspection and points out to what should be agreed upon between manufacturer and customer before carrying out an inspection. Cancels and replaces the second edition ISO 1886:1980, of which it constitutes a technical revision.

  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    2 pages
    French language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off