iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 1889:2009

(Main)

Reinforcement yarns - Determination of linear density (ISO 1889:2009)

Reinforcement yarns - Determination of linear density (ISO 1889:2009)

ISO 1899:2009 specifies a method for the determination of the linear density of glass-fibre, carbon-fibre, aramid-fibre and any other reinforcement-fibre yarns.
It is applicable to all types of yarn, including single yarns, double and cabled yarns, textured yarns, rovings and staple-fibre yarns.

Verstärkungsgarne - Bestimmung der Feinheit (ISO 1889:2009)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Feinheit von Garnen aus Glasfasern, Kohlenstoff- und Aramidfasern und alle anderen Verstärkungsgarne fest.
Sie gilt für alle Garne, d. h. Einfachgarne, ein- und mehrstufige Game, texturierte Garne, Rovings und Stapelfasergarne.

Fils de renfort - Détermination de la masse linéique (ISO 1889:2009)

L'ISO 1889:2009 spécifie une méthode pour la détermination de la masse linéique des fils de verre textile, de carbone, d'aramide et de tout autre fil de renfort.
La méthode est applicable à tous les types de fils, comprenant les fils simples, les fils retors et câblés, les fils texturés, les stratifils et les fils de verranne.

Preja za ojačenje - Določevanje dolžinske mase (ISO 1889:2009)

General Information

Status
Published
Publication Date
30-Jun-2009
Withdrawal Date
30-Jan-2010
ICS
59.100.01 - Materials for the reinforcement of composites in general
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249/SC 2/WG 1 - Reinforcements
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Jul-2009
Completion Date
01-Jul-2009
Ref Project
SIST EN ISO 1889:2009 - Reinforcement yarns - Determination of linear density (ISO 1889:2009)

Relations

Replaces
EN ISO 1889:1997 - Reinforcement yarns - Determination of linear density (ISO 1889:1997)
Effective Date
22-Dec-2008

Buy Standard

EN ISO 1889:2009EN ISO 1889:2009
PreviousNext
Standard
EN ISO 1889:2009
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1889:2009
01-december-2009
1DGRPHãþD
SIST EN ISO 1889:1999
3UHMD]DRMDþHQMH'RORþHYDQMHGROåLQVNHPDVH ,62
Reinforcement yarns - Determination of linear density (ISO 1889:2009)
Verstärkungsgarne - Bestimmung der Feinheit (ISO 1889:2009)
Fils de renfort - Détermination de la masse linéique (ISO 1889:2009)
Ta slovenski standard je istoveten z: EN ISO 1889:2009
ICS:
59.100.01 0DWHULDOL]DRMDþLWHY Materials for the
NRPSR]LWRYQDVSORãQR reinforcement of composites
in general
SIST EN ISO 1889:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1889:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 1889:2009
EUROPEAN STANDARD
EN ISO 1889
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2009
ICS 59.100.01 Supersedes EN ISO 1889:1997
English Version
Reinforcement yarns - Determination of linear density (ISO
1889:2009)
Fils de renfort - Détermination de la masse linéique (ISO Verstärkungsgarne - Bestimmung der Feinheit (ISO
1889:2009) 1889:2009)
This European Standard was approved by CEN on 13 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1889:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1889:2009
EN ISO 1889:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1889:2009
EN ISO 1889:2009 (E)
Foreword
This document (EN ISO 1889:2009) has been prepared by Technical Committee ISO/TC 61 “Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1889:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1889:2009 has been approved by CEN as a EN ISO 1889:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 1889:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 1889:2009

INTERNATIONAL ISO
STANDARD 1889
Fourth edition
2009-07-01


Reinforcement yarns — Determination of
linear density
Fils de renfort — Détermination de la masse linéique





Reference number
ISO 1889:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 1889:2009
ISO 1889:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 1043-2:2011(Main)
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
SIST EN ISO 1043-2:2012

ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1890:2009(Main)
Reinforcement yarns - Determination of twist (ISO 1890:2009)
SIST EN ISO 1890:2009

ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres.
The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step.
The International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only.
The method is not applicable to products made from staple fibres.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13417-3:2001(Main)
Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements
SIST EN 13417-3:2002

1.1   This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2   The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
1.3   The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1. In 4.2 the manufacturer shall define other obligatory information to be included in the specification. Other parameters can be included in the specification by agreement between manufacture and customer. These parameters are defined in clause 4.3.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13417-1:2001(Main)
Reinforcement - Specifications for woven fabrics - Part 1: Designation
SIST EN 13417-1:2003

1.1   This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics.
1.2   This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.
The material used may be used on its own or in combination (hybrids).
1.3   The designation of a fabric is structured in a product hierarchy which includes several levels which determine families and sub-families of fabrics.
It is not intended that this hierarchy takes into account all the attributes of individual fabrics which may use different yarn types or different yarn counts. Neither is it intended to imply that woven fabrics having the same designation give necessarily the same performance.
This Part 1 of EN 13417 does not give engineering data, performance data or data which may be required to specify woven fabrics for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 13417-2.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13417-2:2001(Main)
Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements
SIST EN 13417-2:2002

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1043-2:2011(Main)
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
SIST EN ISO 1043-2:2012

ISO 1043-2:2011 specifies uniform symbols for terms referring to fillers and reinforcing materials. It includes only those symbols that have come into established use, and its main aim is both to prevent the occurrence of more than one symbol for a given filler or reinforcing material and to prevent a given symbol being interpreted in more than one way.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 1890:2009(Main)
Reinforcement yarns - Determination of twist (ISO 1890:2009)
SIST EN ISO 1890:2009

ISO 1890:2009 specifies a method for the determination of twist in yarns made from textile glass, carbon, aramid or any other reinforcement fibres.
The method applies to single yarns (one twist) and to folded or cabled yarns (two or more twists). For folded and cabled yarns, the method is generally applied only to the final twist step.
The International Standard is applicable to package-wound yarns. If the measurement is carried out on yarns taken from a beam (or warp) or from a fabric, the result is of an indicative nature only.
The method is not applicable to products made from staple fibres.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13417-3:2001(Main)
Reinforcement - Specifications for woven fabrics - Part 3: Specific requirements
SIST EN 13417-3:2002

1.1   This Part 3 of EN 13417 defines a specification for woven fabrics made from continuous filament reinforcement yarns, tows and rovings, which may be used as the basis for specifications.
The specification defines those parameters which shall be specified plus other parameters which may be specified if required for a particular application or processing method.
1.2   The specification does not define absolute or nominal values for any parameter. The value of a specified parameter is to be defined by the manufacturer but this specification defines the method of test to be used to determine the value of each specified parameter and the tolerance about which the parameter shall be controlled by the manufacturer.
1.3   The parameters which shall always be defined in any woven reinforcement fabric specification are defined in 4.1. In 4.2 the manufacturer shall define other obligatory information to be included in the specification. Other parameters can be included in the specification by agreement between manufacture and customer. These parameters are defined in clause 4.3.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13417-1:2001(Main)
Reinforcement - Specifications for woven fabrics - Part 1: Designation
SIST EN 13417-1:2003

1.1   This Part 1 of EN 13417 establishes a method of designation for woven fabrics which may be used as a basis for specifications of fabrics used for the reinforcement of plastics.
1.2   This designation system applies to fabrics made from para-aramid, carbon, glass, polyethylene, polyester and ceramic fibre in the form of single yarns, plied yarns, cabled yarns, textured yarns, rovings, tows, etc. and which are intended to provide reinforcement in plastic composite materials.
The material used may be used on its own or in combination (hybrids).
1.3   The designation of a fabric is structured in a product hierarchy which includes several levels which determine families and sub-families of fabrics.
It is not intended that this hierarchy takes into account all the attributes of individual fabrics which may use different yarn types or different yarn counts. Neither is it intended to imply that woven fabrics having the same designation give necessarily the same performance.
This Part 1 of EN 13417 does not give engineering data, performance data or data which may be required to specify woven fabrics for a particular application or method of processing.
If such additional properties are required they shall be determined in accordance with the test methods specified in EN 13417-2.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13417-2:2001(Main)
Reinforcement - Specifications for woven fabrics - Part 2: Methods of test and general requirements
SIST EN 13417-2:2002

1.1   This Part 2 of EN 13417 defines the test methods to be used to determine the designated and specified properties given in Parts 1 & 3 respectively.
1.2   This Part 2 of EN 13417 defines the general requirements applicable to the specification of all types of woven fabrics falling within the scope of this specification as defined in Part 1 of the standard.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day