EN ISO 3233-2:2014

Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014)

ISO 3233-2:2014 specifies a method for determining the non-volatile matter by volume (NVv) of coating materials by determining the practical dry-film density. This method determines the volume percentage of non-volatile matter in paints, varnishes and related products by measuring the density of a dry coating for any specified temperature range and period of drying or curing.
Using the non-volatile matter by volume results obtained in accordance with ISO 3233-2:2014, it is possible to calculate the practical spreading rate of coating materials.
This method specifies an additional shape of plate to those described in ISO 3233‑1 and is suitable for all products which can be applied by dipping.

Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile - Teil 2: Verfahren mit Bestimmung des Gehaltes an nichtflüchtigen Anteilen nach ISO 3251 und Bestimmung der Trockenfilmdichte beschichteter Probenplatten nach dem Archimedes-Prinzip (ISO 3233-2:2014)

Dieser Teil von ISO 3233 legt ein Verfahren zum Ermitteln des Volumens der nichtflüchtigen Anteile (VnfA) von Beschichtungsstoffen durch die Bestimmung der praktischen Trockenfilmdichte fest. Bei diesem Verfahren wird der nichtflüchtige Anteil nach ISO 3251 bestimmt.
Aus den nach dieser Norm erhaltenen Ergebnissen des VnfA kann die praktische Ergiebigkeit von Beschichtungsstoffen berechnet werden.
Diese Norm ist für alle Produkte anwendbar, die durch Tauchen aufgetragen werden können.
Diese Norm ist nicht anwendbar für Beschichtungsstoffe, die die kritische Pigmentvolumenkonzentration (KPVK) überschreiten.

Peintures et vernis - Détermination du pourcentage en volume de matière non volatile - Partie 2: Méthode utilisant la teneur en matière non volatile déterminée conformément à l'ISO 3251 et la masse volumique du feuil sec déterminée par le principe d'Archimède sur des panneaux d'essai revêtus (ISO 3233-2:2014)

L'ISO 3233-2:2014 spécifie une méthode permettant de mesurer la teneur en volume de matière non volatile (NVv) de produits de peinture par détermination de la masse volumique pratique du feuil sec. Cette méthode détermine le pourcentage en volume de matières non volatiles dans les peintures, vernis et produits assimilés par mesurage de la densité d'un revêtement sec pour toute gamme de température et toute période de séchage ou de polymérisation spécifiées.
La teneur en volume de matière non volatile déterminée conformément à l'ISO 3233-2:2014 permet de calculer le rendement pratique d'application de produits de peinture.
Cette méthode spécifie une forme de plaque supplémentaire à celles décrites dans l'ISO 3233‑1 et elle est utilisable pour tous les produits qui peuvent être appliqués par immersion.

Barve in laki - Določevanje prostorninskega deleža nehlapnih snovi - 2. del: Metoda določevanja nehlapnih snovi v skladu z ISO 3251 in določevanje gostote suhe plasti filma na premazani preskusni plošči po Arhimedovem načelu (ISO 3233-2:2014)

Standard EN ISO 3233-2 določa metodo za določevanje prostorninskega deleža nehlapnih snovi (NVv) materialov za prevleke z določevanjem praktične gostote suhe plasti filma. Ta metoda določa prostorninski delež nehlapnih snovi v barvah, lakih in sorodnih izdelkih z merjenjem gostote suhe plasti filma za poljuben temperaturni obseg in obdobje sušenja ali strjevanja. Z rezultati nevnetljive snovi glede na prostornino, ki so pridobljeni v skladu s tem delom standarda ISO 3233, je mogoče izračunati hitrost nanašanja premaznih materialov v praksi. Ta metoda določa dodatno obliko plošče glede na tiste, opisane v standardu ISO 3233-1, in je primerna za vse izdelke, ki jih je mogoče uporabiti s potapljanjem. Ta del standarda ISO 3233 se ne uporablja za premazne materiale, v katerih je presežena kritična koncentracija prostornine pigmenta (CPVC).

General Information

• Status: Withdrawn
• Publication Date: 01-Jul-2014
• Withdrawal Date: 01-Oct-2019
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Due Date: 02-Oct-2019
• Completion Date: 02-Oct-2019
• Ref Project: SIST EN ISO 3233-2:2014 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014)

Relations

• Replaced By: EN ISO 3233-2:2019 - Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2019)
• Effective Date: 09-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2014
%DUYHLQODNL'RORþHYDQMHSURVWRUQLQVNHJDGHOHåDQHKODSQLKVQRYLGHO
0HWRGDGRORþHYDQMDQHKODSQLKVQRYLYVNODGX],62LQGRORþHYDQMHJRVWRWH
VXKHSODVWLILOPDQDSUHPD]DQLSUHVNXVQLSORãþLSR$UKLPHGRYHPQDþHOX,62

Paints and varnishes - Determination of the percentage volume of non-volatile matter -
Part 2: Method using the determination of non-volatile-matter content in accordance with
ISO 3251 and determination of dry film density on coated test panels by the Archimedes
principle (ISO 3233-2:2014)
Beschichtungsstoffe - Bestimmung des Volumens nichtflüchtiger Anteile - Teil 2:
Verfahren mit Bestimmung des Gehaltes an nichtflüchtigen Anteilen nach ISO 3251 und
Bestimmung der Trockenfilmdichte beschichteter Probenplatten nach dem Archimedes-
Prinzip (ISO 3233-2:2014)
Peintures et vernis - Détermination du pourcentage en volume de matière non volatile -
Partie 2: Méthode utilisant la teneur en matière non volatile déterminée conformément à
l'ISO 3251 et la masse volumique du feuil sec déterminée par le principe d'Archimède
sur des panneaux d'essai revêtus (ISO 3233-2:2014)
Ta slovenski standard je istoveten z: EN ISO 3233-2:2014
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 3233-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 87.040
English Version
Paints and varnishes - Determination of the percentage volume
of non-volatile matter - Part 2: Method using the determination of
non-volatile-matter content in accordance with ISO 3251 and
determination of dry film density on coated test panels by the
Archimedes principle (ISO 3233-2:2014)
Peintures et vernis - Détermination du pourcentage en Beschichtungsstoffe - Bestimmung des Volumens
volume de matière non volatile - Partie 2: Méthode utilisant nichtflüchtiger Anteile - Teil 2: Verfahren mit Bestimmung
la teneur en matière non volatile déterminée conformément des Gehaltes an nichtflüchtigen Anteilen nach ISO 3251
à l'ISO 3251 et la masse volumique du feuil sec déterminée und Bestimmung der Trockenfilmdichte beschichteter
par le principe d'Archimède sur des panneaux d'essai Probenplatten nach dem Archimedes-Prinzip (ISO 3233-
revêtus (ISO 3233-2:2014) 2:2014)
This European Standard was approved by CEN on 17 April 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3233-2:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 3233-2:2014) has been prepared by Technical Committee ISO/TC 35 “Paints and
varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3233-2:2014 has been approved by CEN as EN ISO 3233-2:2014 without any modification.

INTERNATIONAL ISO
STANDARD 3233-2
First edition
2014-07-01
Paints and varnishes — Determination
of the percentage volume of non-
volatile matter —
Part 2:
Method using the determination
of non-volatile-matter content
in accordance with ISO 3251 and
determination of dry film density on
coated test panels by the Archimedes
principle
Peintures et vernis — Détermination du pourcentage en volume de
matière non volatile —
Partie 2: Méthode utilisant la teneur en matière non volatile
déterminée conformément à l’ISO 3251 et la masse volumique du feuil
sec déterminée par le principe d’Archimède sur des panneaux d’essai
revêtus
Reference number
ISO 3233-2:2014(E)
©
ISO 2014
ISO 3233-2:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 3233-2:2014(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 3
7 Procedure. 3
7.1 Number of determinations and preparation . 3
7.2 Determination of the practical dry-film density . 3
7.3 Determination of the density . 4
7.4 Determination of the non-volatile-matter content . 4
7.5 Determination of film thickness . 4
8 Evaluation . 5
8.1 Calculation of the practical dry-film density . 5
8.2 Calculation of the non-volatile matter by volume using the practical dry-film density . 5
8.3 Determination of the practical spreading rate . 5
9 Precision . 6
9.1 Repeatability . 6
9.2 Reproducibility . 6
10 Test report . 6
Annex A (informative) Overview of existing methods for determination of non-volatile matter
content and volume of non-volatile matter . 8
Bibliography .10
ISO 3233-2:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and varnishes.
ISO 3233 consists of the following parts, under the general title Paints and varnishes — Determination of
the percentage volume of non-volatile matter:
— Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film
density by the Archimedes principle
— Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and
determination of dry film density on coated test panels by the Archimedes principle
— Part 3: Determination by calculation from the non-volatile-matter content determined in accordance
with ISO 3251, the density of the coating material and the
...