EN ISO 28199-2:2009
(Main)Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)
Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)
ISO 28199-2:2009 specifies methods for the determination of colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling of coating materials applied to a test panel under defined conditions.
Beschichtungsstoffe - Beurteilung applikationsbedingter Eigenschaften von Beschichtungssystemen - Teil 2: Farbstabilität, Prozessdeckvermögen, Anlösen, Spritznebelaufnahme, Benetzung, Oberflächenstruktur und Wolkigkeit (ISO 28199-2:2009)
Dieser Teil von ISO 28199 legt Verfahren zum Bestimmen von Farbstabilität, Prozessdeckvermögen, Anlösen, Spritznebelaufnahme, Benetzung, Oberflächenstruktur und Wolkigkeit von Beschichtungsstoffen und Beschichtungen, die unter definierten Bedingungen auf Probenplatten appliziert wurden, fest.
Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au mode d'application - Partie 2: Stabilité des couleurs, pouvoir masquant du procédé, détrempe, absorption des pertes de peinture à la pulvérisation, mouillage, texture superficielle et marbrures (ISO 28199-2:2009)
L'ISO 28199‑2:2009 spécifie des méthodes de détermination de la stabilité des couleurs, du pouvoir masquant du procédé, de la détrempe, de l'absorption des pertes de peinture à la pulvérisation, du mouillage, de la texture superficielle et des marbrures des produits de peinture appliqués sur un panneau d'essai dans des conditions définies.
Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju - 2. del: Barvna stabilnost, kritnost, ponovno raztapljanje, absorpcija pri prašenju, močljivost, struktura površine in lisavost (ISO 28199-2:2009)
Ta del ISO 28199 opredeljuje metode določitve barvne stabilnosti, kritnosti, ponovnega raztapljanja, absorpcije pri prašenju, močljivosti, strukture površine in lisavosti premaznih materialov, nanešenih na preskusno ploščo pod določenimi pogoji.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2010
%DUYHLQODNL9UHGQRWHQMHODVWQRVWLSUHPD]QLKVLVWHPRYSULQDQDãDQMXGHO
%DUYQDVWDELOQRVWNULWQRVWSRQRYQRUD]WDSOMDQMHDEVRUSFLMDSULSUDãHQMX
PRþOMLYRVWVWUXNWXUDSRYUãLQHLQOLVDYRVW ,62
Paints and varnishes - Evaluation of properties of coating systems related to the
application process - Part 2: Colour stability, process hiding power, re-dissolving,
overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2009)
Beschichtungsstoffe - Beurteilung applikationsbedingter Eigenschaften von
Beschichtungssystemen - Teil 2: Farbstabilität, Prozessdeckvermögen, Anlösen,
Spritznebelaufnahme, Benetzung, Oberflächenstruktur, Wolkigkeit (ISO 28199-2:2009)
Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au
mode d'application - Partie 2: Stabilité des couleurs, pouvoir masquant du procédé,
détrempe, absorption des pertes de peinture à la pulvérisation, mouillage, texture
superficielle et marbrures (ISO 28199-2:2009)
Ta slovenski standard je istoveten z: EN ISO 28199-2:2009
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 28199-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
ICS 87.040
English Version
Paints and varnishes - Evaluation of properties of coating
systems related to the application process - Part 2: Colour
stability, process hiding power, re-dissolving, overspray
absorption, wetting, surface texture and mottling (ISO 28199-
2:2009)
Peintures et vernis - Évaluation des propriétés des Beschichtungsstoffe - Beurteilung applikationsbedingter
systèmes de revêtement liées au mode d'application - Eigenschaften von Beschichtungssystemen - Teil 2:
Partie 2: Stabilité des couleurs, pouvoir masquant du Farbstabilität, Prozessdeckvermögen, Anlösen,
procédé, détrempe, absorption des pertes de peinture à la Spritznebelaufnahme, Benetzung, Oberflächenstruktur,
pulvérisation, mouillage, texture superficielle et marbrures Wolkigkeit (ISO 28199-2:2009)
(ISO 28199-2:2009)
This European Standard was approved by CEN on 21 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28199-2:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 28199-2:2009) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28199-2:2009 has been approved by CEN as a EN ISO 28199-2:2009 without any
modification.
INTERNATIONAL ISO
STANDARD 28199-2
First edition
2009-09-01
Paints and varnishes — Evaluation of
properties of coating systems related to
the application process —
Part 2:
Colour stability, process hiding power,
re-dissolving, overspray absorption,
wetting, surface texture and mottling
Peintures et vernis — Évaluation des propriétés des systèmes de
revêtement liées au mode d'application —
Partie 2: Stabilité des couleurs, pouvoir masquant du procédé,
détrempe, absorption des pertes de peinture à la pulvérisation,
mouillage, texture superficielle et marbrures
Reference number
ISO 28199-2:2009(E)
©
ISO 2009
ISO 28199-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
ISO 28199-2:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Colour stability .1
4.1 General .1
4.2 Evaluation.1
5 Process hiding power .3
5.1 General .3
5.2 Evaluation.3
6 Re-dissolving .3
6.1 General .3
6.2 Evaluation.4
7 Overspray absorption .4
7.1 General .4
7.2 Evaluation.4
8 Wetting.5
8.1 General .5
8.2 Evaluation.5
9 Surface texture .6
9.1 General .6
9.2 Evaluation.6
9.2.1 General evaluation .6
9.2.2 Evaluation of base coats .6
9.2.3 Evaluation of clear coats .7
10 Mottling.8
10.1 General .8
10.2 Evaluation.8
11 Test report.8
Bibliography.9
ISO 28199-2:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 28199-2 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and varnishes.
ISO 28199 consists of the following parts, under the general title Paints and varnishes — Evaluation of
properties of coating systems related to the application process:
⎯ Part 1: Relevant vocabulary and preparation of test panels
⎯ Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture
and mottling
⎯ Part 3: Visual assessment of sagging, formation of bubbles, pinholing and hiding power
iv © ISO 2009 – All rights reserved
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.