EN ISO 14233:2003

Dentistry - Polymer-based die materials (ISO 14233:2003)

ISO 14233:2003 gives compositional, performance, user-information, packaging and marking, and testing requirements for polymer-based die materials used in dentistry. It is applicable to die materials having a polymeric matrix as their principal constituent. Polymer-based die materials are used in the dental laboratory mainly to produce casts from dental impressions for the manufacture of fixed or removable restorations)

Zahnheilkunde - Kunststoffe für Modellstümpfe (ISO 14233:2003)

Diese Internationale Norm enthält Anforderungen an die Zusammensetzung, Eignung, Hinweise für den Anwender, Verpackung und Kennzeichnung sowie Prüfung von Kunststoffen für Modellstümpfe, die in der Zahnheilkunde verwendet werden. Sie ist anwendbar auf Modellstumpfwerkstoffe, deren Hauptbestandteil eine Kunststoffmatrix ist. Kunststoffe für Modellstümpfe dienen im zahntechnischen Labor hauptsächlich zur Herstellung von Modellen nach zahnärztlichen Abformungen, um darauf festsitzende oder abnehmbare Restaurationen herzustellen.

Art dentaire - Produits à base de polymère pour matrices (ISO 14233:2003)

L'ISO 14233:2003 fixe les exigences requises des produits à base de polymère pour matrices utilisés en art dentaire en matière de composition, de performances, d'informations destinées à l'utilisateur, d'emballage et marquage et d'essais. Elle s'applique aux produits pour matrices ayant une matrice polymérique comme principal constituant. Les produits à base de polymère pour matrices sont utilisés dans les laboratoires dentaires principalement pour reproduire les structures dentaires à partir d'empreintes afin de permettre la construction de restaurations fixes ou amovibles.

Dentistry - Polymer-based die materials (ISO 14233:2003)

General Information

• Status: Published
• Publication Date: 14-Mar-2003
• ICS: 11.060.10 - Dental materials
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 26-Feb-2008
• Completion Date: 26-Feb-2008
• Ref Project: SIST EN ISO 14233:2003 - Dentistry - Polymer-based die materials (ISO 14233:2003)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14233:2003
01-september-2003
Dentistry - Polymer-based die materials (ISO 14233:2003)
Dentistry - Polymer-based die materials (ISO 14233:2003)
Zahnheilkunde - Kunststoffe für Modellstümpfe (ISO 14233:2003)
Art dentaire - Produits a base de polymere pour matrices (ISO 14233:2003)
Ta slovenski standard je istoveten z: EN ISO 14233:2003
ICS:
11.060.10 =RERWHKQLþQLPDWHULDOL Dental materials
SIST EN ISO 14233:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14233:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 14233:2003
EUROPEAN STANDARD
EN ISO 14233
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 11.060.10
English version
Dentistry - Polymer-based die materials (ISO 14233:2003)
Art dentaire - Produits à base de polymère pour matrices Zahnheilkunde - Kunststoffe für Modellstümpfe (ISO
(ISO 14233:2003) 14233:2003)
This European Standard was approved by CEN on 21 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14233:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14233:2003
EN ISO 14233:2003 (E)
CORRECTED  2003-07-16
Foreword
This document (EN ISO 14233:2003) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 "Dentistry", the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2003, and conflicting national
standards shall be withdrawn at the latest by September 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 14233:2003 has been approved by CEN as EN ISO 14233:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 14233:2003
EN ISO 14233:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 4823 2000 Dentistry – Elastomeric impression EN ISO 4823 2000
materials
ISO 6507-1 1997 Metallic materials – Vickers hardness EN ISO 6507-1 1997
test – Part 1: Test method
ISO 8601 1988 Data elements and interchange EN 28601 1992
formats – Information interchange –
Representation of dates and times
3

---------------------- Page: 5 ----------------------

SIST EN ISO 14233:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 14233:2003

INTERNATIONAL ISO
STANDARD 14233
First edition
2003-03-15


Dentistry — Polymer-based die materials
Art dentaire — Produits à base de polymère pour ma
...