EN 13938-3:2003

Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition

This European Standard specifies a method to determine the tendency of a propellant to undergo transition from deflagration to detonation. It applies to propellants of a grain size up to 8 mm. This method does not apply to black powder.

Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 3: Bestimmung des Überganges der Deflagration in die Detonation

Explosifs à usage civil - Poudre propulsive et propergol - Partie 3: Méthode de détermination du passage de la déflagration à la détonation

La présente Norme européenne décrit une méthode permettant de déterminer la tendance d'une poudre propulsive à passer de la déflagration à la détonation. Elle s'applique aux poudres propulsives dont les grains peuvent atteindre jusqu'à 8 mm. Cette méthode ne s'applique pas à la poudre noire.

Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 3. del: Določevanje prehoda deflagracije v detonacijo

General Information

• Status: Published
• Publication Date: 11-Mar-2003
• Withdrawal Date: 29-Sep-2003
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 5 - Propellants
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jul-2015
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13938-3:2003 - Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition

Relations

• Revised: FprEN 13938-3 - Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transitionExplosifs a usage civil - Poudre propulsive et propergol - Partie 3: Méthode de détermination du passage de la déflagration a la détonationExplosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 3: Bestimmung des Überganges der Deflagration in die DetonationTa slovenski standard je istoveten z:EN 13938-3:2003SIST EN 13938-3:2003en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13938-3:200301-maj-2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13938-3March 2003ICS 71.100.30English versionExplosives for civil uses - Propellants and rocket propellants -Part 3: Determination of deflagration to detonation transitionExplosifs à usage civil - Poudre propulsive et propergol -Partie 3: Méthode de détermination du passage de ladéflagration à la détonationExplosivstoffe für zivile Zwecke - Treibladungspulver undRaketentreibstoffe - Teil 3: Bestimmung des Übergangesder Deflagration in die DetonationThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13938-3:2003 E

Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9
...