iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 381-9:1997

(Main)

Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters

Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters

This European Standard specifies requirements to be used to assess the resistance of gaiters to cutting by hand-held chain saws and other properties. A requirement for the strength of underfoot straps of gaiters is also included.  This European Standard is applicable to gaiters used together with safety footwear according to EN 345:1992 and EN 345:1992/A1 with a metallic toecap, because gaiters offer only partial protection against chain saw cutting. Gaiters according to this European Standard are not intended for use in situations where there is a significant risk of tripping such as tree climbing or in forests.  The test methods associated with the requirements in this European Standard are given in EN 381-8.

Schutzkleidung für die Benutzer von handgeführten Kettensägen - Teil 9: Anforderungen an Schutzgamaschen für Kettensägen

Diese Europäische Norm spezifiziert die Anforderungen des Schnittwiderstandes von Gamaschen gegen Schnitte durch Handgeführte Kettensägen. Eine Anforderung über die Festigkeit der Fußschlaufen von Gamaschen ist ebenfalls enthalten. Dieser Norm gilt für Gamaschen, die in Verbindung mit Sicherheitsschuhen nach EN 345 mit metallischer Zehenschutzkappe verwendet werden, da Gamaschen nur einen partiellen Schutz gegen Kettensägenschnitte bieten. Gamaschen nach dieser Norm sind nicht bestimmt für den Gebrauch in Situationen mit signifikantem Stolperrisiko wie bei der Arbeit im Wald oder beim Besteigen von Bäumen.

Vêtements de protection pour utilisateurs de scies à chaîne tenues à la main - Partie 9: Exigences pour les guêtres de protection pour l'utilisation de scies à chaîne

La présente norme européenne spécifie les exigences à utiliser pour évaluer la résistance des guêtres aux coupures dues aux scies à chaîne tenues à la main. Une exigence à la résistance des brides passant sous le pied de guêtres est également inclue. La présente norme européenne est applicable aux guêtres, uti lisées avec des chaussures de sécurité selon EN 345 avec un embout métallique; les guêtres n'offrent qu'une protection partielle contre les coupures dues aux scies à chaîne.

Varovalna obleka za uporabnike ročnih verižnih žag - 9. del: Zahteve za zaščitne dokolenice (gamaše) za uporabnike verižnih žag

General Information

Status
Withdrawn
Publication Date
22-Apr-1997
Withdrawal Date
23-Jul-2019
ICS
13.340.10 - Protective clothing
Technical Committee
CEN/TC 162 - Protective clothing including hand and arm protection and lifejackets
Drafting Committee
CEN/TC 162/WG 5 - Resistance to mechanical impact of protective clothing
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
24-Jul-2019
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
93/95/EEC - Personal protective equipment (Dir. 89/686/EEC amendment)
96/58/EC - Personal protective equipment (Dir. 89/686/EEC amendment)
Mandate
M/BC/CEN/90/2 - Order for standardization concerning Personal Protective Equipment (P.P.E.)
Ref Project
SIST EN 381-9:1998 - Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw protective gaiters

Relations

Replaced By
EN ISO 11393-5:2019 - Protective clothing for users of hand-held chainsaws - Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
Effective Date
31-Jul-2019

Buy Standard

EN 381-9:1998EN 381-9:1998
PreviousNext
Standard
EN 381-9:1998
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzkleidung für die Benutzer von handgeführten Kettensägen - Teil 9: Anforderungen an Schutzgamaschen für KettensägenVetements de protection pour utilisateurs de scies a chaîne tenues a la main - Partie 9: Exigences pour les guetres de protection pour l'utilisation de scies a chaîneProtective clothing for users of h
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 13997:2024(Main)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2024)
oSIST prEN ISO 13997:2024

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13506-2:2024(Main)
Protective clothing against heat and flame - Part 2: Skin burn injury prediction - Calculation requirements and test cases (ISO 13506-2:2024)
SIST EN ISO 13506-2:2024

This document provides technical details for calculating predicted burn injury to human skin when its surface is subject to a varying heat flux, such as may occur due to energy transmitted through and by a garment or protective clothing ensemble exposed to flames. A series of test cases are provided against which the burn injury prediction calculation method is verified. It also contains requirements for the in situ calibration of the thermal energy sensor — skin injury prediction system for the range of heat fluxes that occur under garments.
The skin burn injury calculation methods as presented in this test method do not include terms for handling short wavelength radiation that may penetrate the skin. The latter include arc flashes, some types of fire exposures with liquid or solid fuels, and nuclear sources.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13506-1:2024(Main)
Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2024)
SIST EN ISO 13506-1:2024

This document specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment.
This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. The rating is based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. Transferred energy and thermal manikin protection factor (TMPF) assessment methods provide a means to quantify product performance.
The exposure heat flux is limited to a nominal level of 84 kW/m2 and durations of 3 s to 20 s dependant on the risk assessment and expectations from the thermal insulating capability of the garment.
The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution.
This test method covers visual evaluation, observation, inspection and documentation on the overall behaviour of the test specimen(s) before, during and after the exposure. The effects of body position and movement are not addressed in this test method.
The heat flux measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2).
This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions.
NOTE            This test method is complex and requires a high degree of technical expertise in both the test setup and operation. Even minor deviations from the instructions in this test method can lead to significantly different test results.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17491-4:2024(Main)
Protective clothing - Test methods for clothing providing protection against chemicals - Part 4: Determination of resistance to penetration by a spray of liquid (spray test) (ISO 17491-4:2024)
SIST EN ISO 17491-4:2024

This document specifies the test method for determining the resistance of chemical protective clothing to penetration by sprays of liquid chemicals at two different levels of intensity:
a)       Method A: low-level spray test. This is applicable to clothing that covers the full body surface and is intended to be worn when there is a potential risk of exposure to small quantities of spray or accidental low-volume splashes of a liquid chemical.
b)       Method B: high-level spray test. This is applicable to clothing with spray-tight connections between different parts of the clothing and, if applicable, between the clothing and other items of personal protective equipment, which covers the full body surface and which is intended to be worn when there is a risk of exposure to sprayed liquid chemical.
This document does not apply to chemical permeation resistance of the materials from which the chemical protective clothing is made.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14325:2018+A1:2024(Main + Amendment)
Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages
SIST EN 14325:2018+A1:2024

This European Standard specifies the performance classification and test methods for materials used in chemical protective clothing, including gloves and footwear. The gloves and boots should have the same chemical protective barrier requirements as the fabric when an integral part of the clothing. This is a reference standard to which chemical protective clothing performance standards may refer in whole or in part, but this standard is not exhaustive in the sense that product standards may well require testing according to test method standards which are not included in this standard.
While these performance levels are intended to relate to the usage to which the chemical protective clothing is to be put, it is essential that the chemical protective clothing manufacturer or supplier indicate the intended use of the protective clothing and that the user (specifier) carries out a risk assessment in order to establish the correct performance level for the intended task.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24231:2024(Main)
Protective clothing - Protection against rain - Test method for ready-made garments against high-energy droplets from above (ISO 24231:2024)
SIST EN ISO 24231:2024

This document specifies a test method for determining the liquid tightness of clothing for protection against rain, using a static manikin exposed to large amount of high energy droplets from above. It is applicable to the testing of jackets, trousers, coats and one- or two-piece suits.
This document is not applicable to the testing of garments for resistance to other weather conditions, e.g. snow, hail-, or strong winds.
NOTE            For general background of the rain simulation, see Annex A.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11610:2023(Main)
Protective clothing - Vocabulary (ISO 11610:2023)
SIST EN ISO 11610:2023

This document contains a list of terms which are frequently used in the standardization of protective clothing (5.1.4) and protective equipment worn on the body, including hand and arm protection and lifejackets, and definitions of these terms.
The definitions are intended to support an unambiguous use of the terms listed.
This document is intended to serve as a reference document for the Working Groups of CEN/TC 162 and ISO/TC 94/SC 13 to ascertain what definitions already exist and may be used for setting up new standards and to provide guidance in the elaboration of new definitions.
NOTE - In addition to text written in the official ISO languages (English, French), this document gives text in German. This text is published under the responsibility of the Member Body for Germany (DIN) and is given for information only. Only the text given in the official lan­guages can be considered as ISO text.

  • Standard
    83 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    160 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14058:2017+A1:2023(Main + Amendment)
Protective clothing - Garments for protection against cool environments
SIST EN 14058:2018+A1:2023

This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6942:2022(Main)
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2022)
SIST EN ISO 6942:2022

This document specifies two complementary methods (method A and method B) for determining the behaviour of materials for heat protective clothing subjected to heat radiation.
These tests are carried out on representative single or multi-layer textiles or other materials intended for clothing for protection against heat. They are also applicable to assemblies, which correspond to the overall build up of a heat protective clothing assembly with or without underclothing,
Method A serves for visual assessment of any changes in the material after the action of heat radiation. With method B the protective effect of the materials is determined. The materials may be tested either by both methods or only by one of them.
The tests according to these two methods serve to classify materials; however, to be able to make a statement or prediction as to the suitability of a material for protective clothing additional criteria must be taken into account.
Since the tests are carried out at room temperature the results do not necessarily correspond to the behaviour of the materials at higher ambient temperatures and therefore are only to a limited extent suitable for predicting the performance of the protective clothing made from the materials under test.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17673:2022(Main)
Protective clothing - Protection against heat and flame - Requirements and test methods for garments with integrated smart textiles and non textile elements
SIST EN 17673:2022

This document applies to garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities.
This document does not concern validating claims that the integrated smart textiles and non-textile elements substitute directly any protection provided by the garment from a heat and flame perspective.
The integrated smart textiles and non-textile elements could include not only the parts integrated into the protective garment but also connections to transmit the data generated or exchange data with external devices. It is not within the scope of this document to evaluate either the data storage or transmission (including connectivity) to the external devices, nor the external devices. This document evaluates only the smart textiles and non-textile elements integrated into the garment.
This document supplements the requirements of EN ISO 11612 and EN ISO 13688 and does not replace any of the requirements cited in those documents.
This document sets additional testing and performance requirements linked specifically to the garments and assembly of garments providing protection against heat and flame, with integrated smart textiles and non-textile elements for enhanced health, safety and survival capabilities. These additional requirements will depend on the functionality of the smart textiles or non-textile element and its needed efficacy during heat and flame hazards and risks from an electrical/electronic safety perspective in these situations.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day