prEN 13763-7

Explosives for civil uses - Detonators and detonating cord relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

This document specifies a method for determining the mechanical strength of electric detonators, electronic detonators and non-electronic detonators, leading wires/shock tubes, and their connections into the crimp/closure or sealing arrangement.
This method is applicable to explosives for civil uses.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 7: Bestimmung der mechanischen Festigkeit von Zünderdrähten, Zündschläuchen, Verbindungen, Anwürgungen und Verschlüssen

Dieses Dokument legt ein Verfahren für die Bestimmung der mechanischen Festigkeit von elektrischen Zündern, elektronischen und nichtelektrischen Zündern, Zünderdrähten/Zündschläuchen und deren Verbindungen über Anwürgungen/Verschlüsse oder Verschlussstopfen fest.
Dieses Verfahren gilt für Explosivstoffe für zivile Zwecke.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 7 : Détermination de la force mécanique des fils d’amorce, tubes à transmission d’onde de choc, liaisons, sertissages et fermetures

Le présent document spécifie une méthode de détermination de la résistance mécanique des fils d’amorces/tubes à transmission d’onde de choc des détonateurs électriques, des détonateurs électroniques et des détonateurs non électroniques, et de leurs raccords situés dans le sertissage/la fermeture ou autre type de bouchon.
La présente méthode s’applique aux explosifs à usage civil.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 7. del: Ugotavljanje mehanske trdnosti vodnikov, detonacijskih cevk, konektorjev, stisnjenih spojev in stisnitev

General Information

• Status: Not Published
• Publication Date: 29-May-2023
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 15-Dec-2023
• Due Date: 24-Jul-2021
• Completion Date: 15-Dec-2023
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Mandate: M/562 - Standardization Request on Explosives for civil use
• Ref Project: oSIST prEN 13763-7:2021 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

Relations

• Revises: EN 13763-7:2003 - Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13763-7:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 7. del: Ugotavljanje
mehanske trdnosti vodnikov, detonacijskih cevk, konektorjev, stisnjenih spojev in
stisnitev
Explosives for civil uses - Detonators and relays - Part 7: Determination of the
mechanical strength of leading wires, shock tubes, connections, crimps and closures
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 7:
Bestimmung der mechanischen Festigkeit von Zünderdrähten, Zündschläuchen,
Verbindungen, Anwürgung und Verschluss
Explosifs à usage civil - Détonateurs et relais - Partie 7: Déterminationde la force
mécanique des fils d'amorçage, tubes à transmission d'onde de choc, liaisons,
sertissags et fermetures
Ta slovenski standard je istoveten z: prEN 13763-7
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-7:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13763-7:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13763-7:2021


DRAFT
EUROPEAN STANDARD
prEN 13763-7
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13763-7:2003
English Version

Explosives for civil uses - Detonators and detonating cord
relays - Part 7: Determination of the mechanical strength
of leading wires, shock tubes, connections, crimps and
closures
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 7: Détermination de la Sprengschnurverbinder - Teil 7: Bestimmung der
résistance mécanique des fils d'amorçage, tubes à mechanischen Festigkeit von Zünderdrähten,
transmission d'onde de choc, liaisons, sertissages et Zündschläuchen, Verbindungen, Anwürgung und
fermeture Verschlus
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-7:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13763-7:2021
prEN 13763-7:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus .
...