EN ISO 6272-2:2006

Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2002)

ISO 6272-2:2002 describes a method for rapidly deforming, by impact with a spherical indenter of diameter 12,7 mm or 15,9 mm, a coating film and its substrate and evaluating the effect of such deformation.

Beschichtungsstoffe - Bestimmung der Widerstandsfähigkeit bei schlagartiger Verformung (Schlagfestigkeit) - Teil 2: Prüfung durch fallendes Gewichtsstück, kleine Prüffläche (ISO 6272-2:2002)

Dieser Teil von ISO 6272 beschreibt ein Verfahren zum schlagartigen Verformen einer Beschichtung und
deren Substrat mit einem kugelförmigen Eindringkörper von 12,7 mm oder 15,9 mm Durchmesser und zum
Bewerten der Auswirkung einer solchen Verformung.
ANMERKUNG Der Ausdruck „Schlagfestigkeit“ wird zwar im Titel und im Text dieses Teils von ISO 6272 benutzt, ein
wichtiges Merkmal des angewendeten Prüfgerätes ist aber, dass es eher eine schnelle Verformung hervorrufen sollte als
einen wirklichen Schlag.
Wenn Zahlenwerte verwendet werden, sollte dieses Prüfverfahren wegen der schlechten Vergleichbarkeit auf
Prüfungen in nur einem Laboratorium beschränkt werden. Die Übereinstimmung zwischen unterschiedlichen
Laboratorien wird verbessert, wenn anstelle von Zahlenwerten Rangstufen verwendet werden.

Peintures et vernis - Essais de déformation rapide (résistance au choc) - Partie 2: Essai de chute d'une masse avec pénétrateur de surface réduite (ISO 6272-2:2002)

L'ISO 6272-2:2002 décrit une méthode visant à déformer rapidement, au moyen d'un choc avec un pénétrateur sphérique d'un diamètre de 12,7 mm ou de 15,9 mm, un revêtement ainsi que son substrat et à évaluer les effets d'une telle déformation.

Barve in laki - Preskusi na podlagi hitre deformacije (odpornost proti udarcu) - 2. del: Metoda s padajočo utežjo, majhna površina vtiska (ISO 6272-2:2002)

General Information

• Status: Withdrawn
• Publication Date: 09-May-2006
• Withdrawal Date: 14-Aug-2011
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Aug-2011
• Completion Date: 15-Aug-2011
• Ref Project: SIST EN ISO 6272-2:2006 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2002)

Relations

• Replaced By: EN ISO 6272-2:2011 - Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6272-2:2006
01-julij-2006
%DUYHLQODNL3UHVNXVLQDSRGODJLKLWUHGHIRUPDFLMHRGSRUQRVWSURWLXGDUFX
GHO0HWRGDVSDGDMRþRXWHåMRPDMKQDSRYUãLQDYWLVND,62
Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-
weight test, small-area indenter (ISO 6272-2:2002)
Beschichtungsstoffe - Bestimmung der Widerstandsfähigkeit bei schlagartiger
Verformung (Schlagfestigkeit) - Teil 2: Prüfung durch fallendes Gewichtsstück, kleine
Prüffläche (ISO 6272-2:2002)
Peintures et vernis - Essais de déformation rapide (résistance au choc) - Partie 2: Essai
de chute d'une masse avec pénétrateur de surface réduite (ISO 6272-2:2002)
Ta slovenski standard je istoveten z: EN ISO 6272-2:2006
ICS:
87.040
SIST EN ISO 6272-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 6272-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2006
ICS 87.040

English Version
Paints and varnishes - Rapid-deformation (impact resistance)
tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-
2:2002)
Peintures et vernis - Essais de déformation rapide Beschichtungsstoffe - Bestimmung der
(résistance au choc) - Partie 2: Essai de chute d'une masse Widerstandsfähigkeit bei schlagartiger Verformung
avec pénétrateur de surface réduite (ISO 6272-2:2002) (Schlagfestigkeit) - Teil 2: Prüfung durch fallendes
Gewichtsstück, kleine Prüffläche (ISO 6272-2:2002)
This European Standard was approved by CEN on 21 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6272-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 6272-2:2006 (E)






Foreword



The text of ISO 6272-2:2002 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 6272-2:2006 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2006, and conflicting national
standards shall be withdrawn at the latest by November 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 6272-2:2002 has been approved by CEN as EN ISO 6272-2:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 6272-2
First edition
2002-07-01
Paints and varnishes — Rapid-deformation
(impact resistance) tests —
Part 2:
Falling-weight test, small-area indenter
Peintures et vernis — Essais de déformation rapide (résistance au choc) —
Partie 2: Essai de chute d'une masse avec pénétrateur de surface réduite

Reference number
ISO 6272-2:2002(E)
©
ISO 2002

---------------------- Page: 4 ----------------------

ISO 6272-2:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading
...