EN 16603-10-24:2017
(Main)Space engineering - Interface management
Space engineering - Interface management
This standard describes a standard process and methodology for interface management throughout the life cycle, in terms of identification, requirements specification, definition, approval and control, implementation, verification and validation of interfaces, within a space programme or project and in accordance with the other relevant ECSS standards.
Raumfahrttechnik - Schnittstellenmanagement
Ingénierie spatiale - Gestion des interfaces
Vesoljska tehnika - Upravljanje vmesnika
Ta standard opisuje standardni postopek in metodologijo upravljanja vmesnikov v celotnem življenjskem ciklusu, kar zadeva identifikacijo, specifikacijo zahtev, opredelitev, odobritev in nadzor, izvajanje, preverjanje in potrjevanje vmesnikov v okviru vesoljskega programa ali projekta in v skladu z drugimi ustrezni standardi ECSS.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vesoljska tehnika - Upravljanje vmesnikaRaumfahrttechnik - SchnittstellenmanagementIngénierie spatiale - Gestion des interfacesSpace engineering - Interface management49.140Vesoljski sistemi in operacijeSpace systems and operationsICS:Ta slovenski standard je istoveten z:EN 16603-10-24:2017SIST EN 16603-10-24:2017en,fr,de01-oktober-2017SIST EN 16603-10-24:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16603-10-24
August
t r s y ICS
v {ä s v r
English version
Space engineering æ Interface management
Ingénierie spatiale æ Gestion des interfaces
Raumfahrttechnik æ Schnittstellenmanagement This European Standard was approved by CEN on
t t August
t r s xä
C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN and CENELEC memberä
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels y any means reserved worldwide for CEN national Members and for CENELEC Membersä Refä Noä EN
s x x r uæ s ræ t vã t r s y ESIST EN 16603-10-24:2017
Figures Figure 4-1 Interface management process – overview of the main process steps . 12 Figure 4-2: Interface Change Management Process implementation . 16 Figure 4-3: Generic interface management life cycle . 18 Figure 4-4: Typical space to launch segment interface life cycle . 19 Figure 4-5: Typical space to ground segment interface life cycle . 20 Figure 4-6: Typical interface management life cycle involving OTS . 21
: Examples of interface data grouping in ICDs . 32
Tables Table E-1 : Identified interface natures and corresponding ECSS disciplines . 39
This standard describes a standard process and methodology for interface management throughout the life cycle, in terms of identification, requirements specification, definition, approval and control, implementation, verification and validation of interfaces, within a space programme or project and in accordance with the other relevant ECSS standards. In line with the definition of the Space System breakdown in Figure 2-1 of ECSS-S-ST-00-01, this standard is applicable to the following interfaces, where a contractual relationship exist among parties: • within the Space Segment • within the Ground Segment • between the Space Segment and the Ground Segment • between Space Segment and Launch Segment only for ICD aspects in conformance to the launcher user manual. This standard does not ensure that all the specificities of interfaces within the Launch Segment are covered. This standard is applicable to development of products at all different levels in the product tree. It is applicable to both the customer and the supplier of the product during all project phases (0 to F) and follows the generic ECSS customer/supplier pattern. This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00. SIST EN 16603-10-24:2017
EN reference Reference in text Title EN 16601-00-01 ECSS-S-ST-00-01 ECSS - Glossary of terms EN 16003-10 ECSS-E-ST-10 Space engineering - System engineering general requirements EN 16003-10-02 ECSS-E-ST-10-02 Space engineering - Verification EN 16003-10-06 ECSS-E-ST-10-06 Space engineering - Technical requirements specification EN 16001-10 ECSS-M-ST-10 Space project management - Project planning and implementation EN 16001-40 ECSS-M-ST-40 Space project management - Configuration and information management EN 16002-10-09 ECSS-Q-ST-10-09 Space product assurance - Nonconformance control system
ECSS-E-ST-10-06 applies: 1. verification requirements c. For the purpose of this Standard, the following terms and definitions from ECSS-M-ST-40 apply: 1. change request 2. change proposal 3.2 Terms specific to the present standard 3.2.1 controlled ICD ICD formally issued subject to configuration control process 3.2.2 external interface interface between items under different programme responsibilities 3.2.3 frozen ICD ICD formally issued subject to configuration control process and signed by interface responsible and all the involved actors NOTE 1 A “frozen” ICD reflects the design baseline that is considered, for the interface related aspects, to be final and complete allowing start of manufacturing, integration, implementation and testing activities. SIST EN 16603-10-24:2017
The interface actors are all parties involved in the interface ends definition, design, development. 3.2.5 interface control document (ICD) document defining the design of the interface(s) 3.2.6 interface definition document (IDD) document defining the design of one interface end 3.2.7 interface end one side of an interface
An interface end is the point of interaction of one of the elements of an interface. 3.2.8 interface identification document document defining the index of all identified interfaces
3.2.9 interface plane plane that distinguishes the two interface ends that interface with each other 3.2.10 interface requirement document (IRD) document defining the requirements for an interface or a collection of interfaces. 3.2.11 interface responsible responsible for the requirement specification, definition, development and verification of the interface
The interface responsible is the customer or his delegate, as an example for space segment to launch
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.