Entertainment technology - Machinery for stages and other production areas - Safety requirements and inspections

This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events.
The document applies to machinery installations with guided or unguided loads.
This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances".
This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies.
The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.

Veranstaltungstechnik - Maschinen für Bühnen und andere Produktionsbereiche - Sicherheitstechnische Anforderungen und Prüfungen

Dieses Dokument gilt für Maschinen, maschinentechnische Einrichtungen und maschinentechnische Steuerungssysteme, die in Versammlungsstätten sowie in Bühnen- und Produktionsbereichen für Veranstaltungen und Theaterproduktionen (kurz Bühnenmaschinerie) eingesetzt werden. Solche Stätten beinhalten: Theater, Mehrzweckhallen, Ausstellungshalle; Film-, Fernseh- und Rundfunkstudios; Konzerthallen, Schulen, Bars, Diskotheken, Freilichtbühnen und andere Räume für Aufführungen und Veranstaltungen.
Dieses Dokument gilt für maschinentechnische Einrichtungen mit geführten und ungeführten Lasten.
Dieses Dokument deckt in der Veranstaltungstechnik verwendete Maschinen ab, einschließlich Maschinen, die aus der Maschinenrichtlinie (2006/42/EG), insbesondere durch Artikel 1, 2(j) ausgeschlossen sind; dies sind „Maschinen zur Beförderung von Darstellern während künstlerischer Vorführungen“.
Diese Maschinen beinhalten Steuerungen, elektrische und elektronische Steuerungssysteme, elektrische und elektronische Ausrüstung, hydraulische und pneumatische Kraftübertragungssysteme.
Die Prinzipien in diesem Dokument gelten auch für maschinentechnische Einrichtungen mit neuen Technologien oder Sonderanfertigungen, die hier nicht besonders benannt sind, jedoch auf ähnliche Art funktionieren oder für bezüglich der oben genannten Geräte ähnliche Zwecke vorgesehen sind.

Technologies du spectacle - Machinerie pour scènes et autres zones de production - Exigences et inspections relatives à la sécurité

Le présent document s’applique aux machines, aux installations de machinerie et aux systèmes de commande de machines utilisés dans les lieux de montage et dans les installations de mise en scène et de production pour les événements et les productions théâtrales (les machines de scène, en résumé). Ces installations comprennent : les théâtres, les salles polyvalentes, les salles d’exposition ; les studios de cinéma, de télévision et de radio ; les salles de concert, les écoles, les bars, les discothèques, les scènes en plein air et autres salles de spectacles et d’événements.
Le présent document s’applique aux installations de machinerie traitant des charges guidées ou non guidées.
Le présent document couvre les machines utilisées dans l’industrie du spectacle, notamment les machines qui sont exclues de la Directive Machines (2006/42/CE) spécifiquement à l’Article 1, alinéa 2(j), qui exclut « les machines prévues pour déplacer des artistes pendant des représentations artistiques ».
Ces machines comprennent les commandes, les systèmes de commande électriques et électroniques, les équipements électriques et électroniques, l’alimentation en énergie hydraulique et pneumatique.
Les principes du présent document s’appliquent également aux installations de machinerie basées sur de nouvelles technologies ou aux installations spécialement conçues qui ne sont pas expressément mentionnées ici, mais qui fonctionnent néanmoins de manière similaire ou sont destinées à des fins similaires aux équipements énumérés ci-dessus.

Razvedrilna tehnologija - Stroji za odre in druge prireditvene prostore - Varnostne zahteve in pregledi

General Information

Status
Published
Publication Date
12-May-2020
Withdrawal Date
29-Nov-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-May-2020
Due Date
18-Aug-2020
Completion Date
13-May-2020

Relations

Buy Standard

Standard
EN 17206:2020
English language
107 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17206:2018
English language
104 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17206:2020
01-julij-2020
Razvedrilna tehnologija - Stroji za odre in druge prireditvene prostore - Varnostne
zahteve in pregledi
Entertainment technology - Machinery for stages and other production areas - Safety
requirements and inspections
Veranstaltungstechnik - Maschinen für Bühnen und andere Produktionsbereiche -
Sicherheitstechnische Anforderungen und Prüfungen
Technologies du spectacle - Machinerie pour scènes et autres zones de production -
Exigences et inspections relatives à la sécurité
Ta slovenski standard je istoveten z: EN 17206:2020
ICS:
97.200.10 Gledališka, odrska in Theatre, stage and studio
studijska oprema ter delovne equipment
postaje
SIST EN 17206:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17206:2020

---------------------- Page: 2 ----------------------
SIST EN 17206:2020


EN 17206
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 97.200.10 Supersedes CWA 15902-1:2008
English Version

Entertainment technology - Machinery for stages and
other production areas - Safety requirements and
inspections
Technologies du spectacle - Machinerie pour scènes et Veranstaltungstechnik - Maschinen für Bühnen und
autres zones de production - Exigences et inspections andere Produktionsbereiche - Sicherheitstechnische
relatives à la sécurité Anforderungen und Prüfungen
This European Standard was approved by CEN on 7 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17206:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17206:2020
EN 17206:2020 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 10
3.1 General terms . 10
3.2 Loads, forces and pressures . 14
3.3 Electrical equipment and control systems . 16
3.4 Tolerances relating to movement . 19
4 Hazards . 19
4.1 General . 19
4.2 List of Significant Hazards .
...

SLOVENSKI STANDARD
oSIST prEN 17206:2018
01-marec-2018
Razvedrilna tehnologija - Oprema za dvigovanje in nošenje bremen za odre in
druge prireditvene prostore razvedrilne industrije - Specifikacije splošnih zahtev
(razen za aluminijaste in jeklene traverze in stebre)
Entertainment Technology - Lifting and Load-bearing Equipment for Stages and other
Production Areas within the Entertainment Industry - Specifications for general
requirements (excluding aluminum and steel trusses and towers)
Veranstaltungstechnik - Hub- und Lastaufnahmeeinrichtungen für Bühnen und andere
Produktionsbereiche in der Veranstaltungsindustrie - Festlegung von grundlegenden
Anforderungen (mit Ausnahme von Aluminium- und Stahltraversen)
Ta slovenski standard je istoveten z: prEN 17206
ICS:
97.200.10 Gledališka, odrska in Theatre, stage and studio
studijska oprema ter delovne equipment
postaje
oSIST prEN 17206:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17206:2018

---------------------- Page: 2 ----------------------
oSIST prEN 17206:2018


DRAFT
EUROPEAN STANDARD
prEN 17206
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2018
ICS 97.200.10 Will supersede CWA 15902-1:2008
English Version

Entertainment Technology - Lifting and Load-bearing
Equipment for Stages and other Production Areas within
the Entertainment Industry - Specifications for general
requirements (excluding aluminum and steel trusses and
towers)
 Veranstaltungstechnik - Hub- und
Lastaufnahmeeinrichtungen für Bühnen und andere
Produktionsbereiche in der Veranstaltungsindustrie -
Festlegung von grundlegenden Anforderungen (mit
Ausnahme von Aluminium- und Stahltraversen)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 433.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17206:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17206:2018
prEN 17206:2017 (E)
Contents Page
European foreword . 7
Introduction . 8
1 Scope . 9
2 Normative references . 10
3 Terms and definitions . 11
3.1 General terms . 12
3.2 Loads and forces . 15
3.3 Electrical equipment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.